Refine by
Power Lines Monitoring Technology Equipment & Supplies
191 equipment items found
by:Sentrisense based inStockholm, SWEDEN
Our predictive technology allows you to prevent failures, to detect incidents, and to join the green energy ...
Premium
Manufactured by:VPInstruments based inDelft, NETHERLANDS
Easy and proper Modbus wiring with VPInstruments Modbus Junction Box. You can create a daisy chain for your instrumentation like VPFlowScopes clean and without mixing up the wires. The terminal inside offers straight forward and rugged connection. The Modbus junction box also includes termination and biasing for the RS485 connection. A LED indicator is available which tells you that the minimum ...
Manufactured by:HT Italia S.r.L. based inFaenza (RA), ITALY
Self-Powered phase sequence measuring device. HT82 is a mobile device to display the phase sequence with 3 terminals in a generic three-phase system. The device provides an “R” indication in case of correct phase sequence or “L” indication in case of incorrect phase sequence. ...
Manufactured by:Chongqing Blue Jay Technology Co.,Ltd based inChongqing, CHINA
ALM-CH16 fault annunciator are installed on the cabinet panel. They are simple, compact and can improve wiring efficiency. They are universal alarms suitable for power control and monitoring systems. The alarm uses a highly reliable MCU to monitor external status in real time. When an abnormality occurs, the corresponding indicator light on the panel lights up, the buzzer sounds an alarm, and the ...
Manufactured by:Link4 Corporation based inAnaheim, CALIFORNIA (USA)
The ADISM sensor gives you monitoring control with a differential pressure to provide accurate readings for temperature and humidity. Its intuitive programming allows for easy setup and even easier use on a day-to-day basis. The ADISM is a powerful companion tool to monitor and control your ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The RLE’s power fail monitor (PFM) monitors any standard outlet and provides early warning that power has been ...
Manufactured by:Invisible Systems Ltd. (ISL) based inCumbria, UNITED KINGDOM
With modern electrical equipment, damage isn't always obvious. Instead of stopping completely, it tries to overcompensate by using more energy. This can go unnoticed for months, wasting energy and leading to inefficiency. U-Series power monitoring solves this by immediately detecting an increase in energy consumption and notifying you, preventing additional expenses from equipment repairs or ...
Manufactured by:Binsfeld Engineering Inc based inMaple City, MICHIGAN (USA)
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to install on existing shafting up to 40 inches (1016 mm) in diameter. Machine ...
Manufactured by:Zhuhai Pilot Technology Co., Ltd. (Pilot) based inZhuhai, CHINA
SPM20 is specially design for Hotel, Hospital, Dormitory, Comercial Building and other applications. It can calculating power consumption, measuring AC device electricity. It is the smallest AC Max. 30 channel energy ...
Manufactured by:PEO B.V. based inWijchen, NETHERLANDS
For most position measurement applications the SiTek SEEPOS system offers a complete and easy-to-use solution. High speed PSD electronics combined with digital signal processing and high speed USB data transfer gives a powerful measurement system. With its large dynamic range it can handle light powers from nW to mW from DC light sources as well as modulated light sources. All parameters, such as ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
With innovative maximum-power-tracking technology, Phocos‘ MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions.The MPPT can yield an energy gain from your PV array (up to 30%). When a Central Unit is used, up to 8 MPPTs can be used together in one system. The charge regulation is then done via data bus by the Central Unit. This will ...
Manufactured by:Idco SAS based inMarseille, FRANCE
6kW/2450MHz microwave generator equipped with tuner and reflected power measurement ...
Manufactured by:Excelitas Technologies based inWaltham, MASSACHUSETTS (USA)
For applications requiring light output monitoring or feedback loops to maintain consistent intensity, X-Cite offers a range of light measurement solutions that can be incorporated into any illumination system. The stand-alone X-Cite Power Measurement System can measure output from lamps, LEDs, or lasers with the ability to record through ...
Manufactured by:Elspec LTD based inCaesarea, ISRAEL
The BlackBox G5DFR is a sophisticated digital fault recorder that leverages Elspec's proprietary PQZIP compression technology to capture and analyze electrical waveforms at a high sampling rate of 1,024 samples per cycle. By continuously detecting and recording all waveform signals, it ensures that no crucial data is lost, and it's capable of retaining comprehensive records for over a year. ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5300 is a top-hat rail mounted Transducer and used to measure and convert frequency input into an proportional DC current or voltage output signal. Input frequency and Output Voltage/Current is displayed on LCD and indicated by ...
Manufactured by:Noise Guard based inLjubljana, SLOVENIA
Running cables for power and communications to monitoring equipment around a construction site or industrial facility can be dangerous and unreliable. In suitable locations, stand-alone equipment may be provided, operating from solar panels and batteries. When coupled with mobile communications, this provides the best approach to ensure wire-free continuous monitoring around the site. For the ...
Manufactured by:Bonitron based inNashville, TENNESSEE (USA)
Bonitron Sag UPD (Uninterruptible Power for Drives) Solutions are the cost effective way to make sure your critical process never sees power disturbances from voltage sags. While some applications experience complete power outages, in most parts of the world sags are the most common culprit of process power ...
Manufactured by:Chatsworth Products (CPI) based inAgoura Hills, CALIFORNIA (USA)
Basic eConnect PDUs provide reliable power distribution in high-density applications where no power monitoring is ...
Manufactured by:Verivolt LLC based inSan Francisco, CALIFORNIA (USA)
Verivolt Encore is designed to perform a 4 wire current measurement. Particular attention was paid on providing a solution that minimizes cost and improves overall performance on distributed systems such as substations, building monitoring, power distribution systems, etc. The Encore C series covers the ranges of ±1mA, ±2mA, ±3mA, ±5mA, ±100mA, ±200mA, ...
Manufactured by:Avatec Power Pte Ltd based inTechpark, SINGAPORE
The telecom module is a single-phase compact battery charger and rectifier that can be standalone or working in parallel as part of a DC power system. With or without battery, the modules provide high quality, reliable DC power for telecommunication applications. Adopting the hot plug-in concept, the modules make the systems ultra compact and allows minimal complexity in the cable management. The ...