Refine by
Applications
- Defense Solutions for Military and Commercial Applications
- Hydrokinetic Turbines for Energy efficiency management
- HydroQuest Hydrokinetic Turbines for clean energy in operation
- Ultra High Temperature Solar Technology for Green Hydrogen Energy Production
- Microsteam - Turbine Power System for Commercial Applications
- Variable Phase Turbine for Industrial Applications
- Microsteam - Turbine Power System for Institutional Applications
- Wind Power Solution for Wind Turbine Smart Control and Power Enhancement
- Ultra High Temperature Solar Technology for Microgrid Energy
- Ultra High Temperature Solar Technology for Off-Grid Electricity & Heat
- Ultra High Temperature Solar Technology for Industrial Heat & Power
- Ultra High Temperature Solar Technology for Green Economic Development Zones
Power Turbine Equipment & Supplies
323 equipment items found
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
Simple single-shaft single-stage turbines designed for powering pumps, turbochargers, fans, mills and grinders, or they can also be used to power an electric ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
Simple single-shaft single-stage turbines designed for powering pumps, turbochargers, fans, mills and grinders, or they can also be used to power an electric ...
Manufactured by:Kinetron Part of ASSA ABLOY based inTilburg, NETHERLANDS
The efficient standard turbine range supplies a good power level up to 350mW at a low pressure drop, suitable for most low power electronic, connected or IoT applications. Due to the bypass valve technology the maximum power is achieved at a low flowrate, combined with a low pressure drop, even at higher flow ...
Manufactured by:Cleveland Electric Laboratories (CEL) based inTwinsburg, OHIO (USA)
Turbine engine monitoring utilizing conventional technologies is one of ATG’s strongest competencies. Over the past several years, we have committed substantial efforts into applying our fiber optic sensing technologies to a variety of aerospace applications and the turbine engine test environment. Our many sensing applications include temperature, component displacement, active surge ...
Manufactured by:Kinetron Part of ASSA ABLOY based inTilburg, NETHERLANDS
The efficient standard turbine range supplies a good power level up to 850mW at a low pressure drop, suitable for higher power electronic, connected or IoT ...
Manufactured by:SIMEC Atlantis Energy based inLondon, UNITED KINGDOM
The AR1500 is a Lockheed Martin designed, 1.5MW horizontal axis turbine complete with active pitch and yaw capability. The nacelle weighs approximately 150 tonnes in air and has a design life of 25 years. The rotor diameter is 18 meters and all key operational systems have triple redundancy built in to maximise reliability offshore. ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
For informational purpose: Pico hydro generator is generally considered to be in the range of 1W – 999W; micro hydro generator1KW-99KW; and mini 100KW – ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
Micro Hydro Turbine is actually a hydro energy generator; a machine which generates electricity by utilizing water. You’ll discover different types of hydro power generators, starting from huge generators for industrial makes use of as well as small, compact options for homes. The sizes of those turbines rely on their use and requirement of ...
Manufactured by:Thordon Bearings Inc. based inBurlington, ONTARIO (CANADA)
Thordon SXL offers the lowest coefficient of friction, superior adhesive wear performance and good resistance to wear resulting from third particle ...
Manufactured by:Thordon Bearings Inc. based inBurlington, ONTARIO (CANADA)
Thordon GM2401 is specially formulated to provide optimal wear resistance in abrasive-laden water conditions, routinely outwearing rubber bearings by a factor of two or more, yet, still exhibiting a significantly lower coefficient of friction compared to ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Hydraulic Clutch Assemblies provide high-torque engagement for industrial applications. Available in variable and fixed displacement types, they operate at pressures up to 5,000 psig (350 bar). Designed for high-speed operation, these assemblies feature SAE mounting and spline shafts, ensuring compatibility with open and closed-loop circuits. Ideal for marine, oil & gas, and power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
Premium
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
The Bosch waste heat boiler uses available waste heat for the environmentally friendly generation of steam and hot water - ideal in combination with combined heat and power plants or gas turbines. Thanks to a highly efficient tubular heat exchanger and optimised thermal insulation, the system achieves a high degree of efficiency. Since no burner is required, the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power generation, and oil & gas ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The Continental Controls Corporation Black Box, also known as the CCC Black Box (or Z-Box), is a specialized device used to monitor and control engines. It is a compact, rugged electronic control unit designed to withstand harsh operating conditions. The CCC Black Box is responsible for managing a wide range of functions, including engine speed control, fuel flow, temperature regulation, and ...
Premium
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The wind turbine control system is the nerve centre of a wind turbine, managing each component to ensure safe and optimized operation. The nacelle-mounted lidars can provide a preview of incoming turbulent ...
Premium
Manufactured by:AMETEK Spectro Scientific based inChelmsford, MASSACHUSETTS (USA)
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
Premium
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The WindHorizon H400 is a compact and high-precision nacelle-mounted forward-looking pulsed wind lidar. It can accurately measure wind speed and direction at any of 10 configurable range gates from 50m to 400m directly in front of the wind turbine hub. Additionally, the WindHorizon series includes the H800 model, which extends the detection range to ...
Premium
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
The self-fired waste heat boiler from Bosch is equipped with a firing system and an additional integrated flue gas tube to utilise waste heat efficiently. The boiler is ideal for combining with combined heat and power units or gas turbines. By utilising waste heat sources, heating and process heat can be generated in a particularly environmentally friendly and ...