Process Heating Equipment
-
Manufactured by Durex Industriesbased in USA
Process heating systems consist of skid- or frame-mounted circulation heaters, process air heaters, or DFX cast circulation heaters with or without an integrated control panel and instrumentation. Process heater systems allow for easy field installation at the job site enabling quick hook up to power as well as ...
-
based in USA
The primary use of coal is for combustion processes that drive electricity generation, steel production and cement manufacturing. TerraPower is demonstrating technology that can convert – rather than burn – this abundant U.S. resource into high-value products suitable for transportation fuels, chemical industry feedstock and ...
-
Manufactured by Thermal Engineering International (USA) Inc. (TEi)based in USA
TEi has incorporated the knowledge and experience from recent acquisitions of EFCO, which included previous Westinghouse and Marley feedwater heater products, to provide our customers with a wide array of quality process heat exchangers. We supply high and low pressure feedwater heaters, oil coolers, component coolers and service water ...
-
Manufactured by Durex Industriesbased in USA
Process heating systems consist of skid- or frame-mounted circulation heaters, process air heaters, or DFX cast circulation heaters with or without an integrated control panel and instrumentation. Process heater systems allow for easy field installation at the job site enabling quick hook up to power as well as ...
-
Manufactured by Gasokol GmbHbased in AUSTRIA
Solar process heat is suitable for commercial and industrial enterprises that require process heat at a lower temperature level: below 100°C. GASOKOL solar systems can be used to produce the heat required by a wide variety of processes. For instance, for washing, cleaning, drying, ...
-
Manufactured by SOLID Solar Energy Systems GmbHbased in AUSTRIA
Many industrial processes run on temperature levels below 100° C. Solar process heating and cooling can substantially offset the production’s energy usage. The food and beverage, chemical, textile, and many other industries use different hot water and cooling processes which matches to our solution and a high potential ...
-
Manufactured by Bertsch Energy GmbH & Co KGbased in AUSTRIA
BERTSCHenergy provides customers from all over the world with high-quality process heat recovery system. Our systems use the energy in the production processes of hydrogen, carbon monoxide, methanol, ammonia, urea and sulphuric acid to generate hot steam and to heat process gas and combustion air. We have decades ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
The use of fossil fuels has contributed to industrialization enormously, but this has resulted in an increase of CO2 in the Earth’s atmosphere. The challenge to many industries is the requirement to heat large volumes of water or aqueous solutions efficiently – which usually requires a combustion process. With our experience ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
Heating processes (not including steam generation) consume about 5.2 quads (quadrillion Btu), which is nearly 17% of all energy used by industry.In U.S. industry, process heating accounts for more direct energy use than any other processes that consume energy during manufacturing.In fact, energy costs for ...
-
Manufactured by Rackambased in CANADA
Our Parabolic Solar Collectors Produces Industrial Process Heat; The parabolic solar collectors designed by Rackam generate heat over a wide temperature ...
-
Manufactured by Torkapparater ABbased in SWEDEN
High temperature processes: Torkapparater has experience from many high temperature processes. We started to supply lime and calcining kilns already in the 1950's and have developed rotary kilns for pyrolysis of e.g. sludge. Today Torkapparater also supplies kilns with indirect heat transmission. The kilns treat the material without ...
-
Manufactured by Operational Group Limitedbased in UNITED KINGDOM
The Regenerative Thermal Oxidiser (RTO) is an extremely efficient thermal oxidiser that uses a number of ceramic beds, either loose saddles or honeycomb blocks, to absorb heat from its exhaust gases. It then uses this captured heat to preheat the incoming process air stream and destroy air pollutants contained in this air stream, at ...
-
Manufactured by AB&CO Groupbased in DENMARK
AB&CO Process Air Heat Exchangers are used in applications where you never compromise. Industrial drying processes require high performances on compact units, by means of high temperatures and pressures. This require supreme reliability and low operation costs. Heat sources are steam, thermal fluid, pressurised hot water, ...
-
Manufactured by FBM Hudson Italianabased in ITALY
FBM Hudson Italiana delivered its first Ammonia Reformed Gas Waste Heat Boiler in the late ’60 and since then has strived to expand and improve design capabilities and manufacturing range. In 1998 FBM Hudson Italiana further increased the product competence by acquiring the technology of Babcock Entreprise S.A.of which became the ...
-
Manufactured by KELVION INC. / PHEbased in USA
Most of the industrial processes require heat exchanger equipment and miscellaneous pressure vessels. The great variety of industrial processes and applications require a wide capability of performing complex thermal and mechanical design as well as the capacity and experience in manufacturing heavy equipment made of special materials to ...
-
based in UNITED KINGDOM
on the market. By processing high volumes of cheap, abundant waste biomass, Bio-CCHP will be able to provide clean-carbon neutral cooling, heat & power at a very competitive unit cost per kWh. Get in touch to discuss reduced cooling, heat and power costs, significant reductions in green-house gas emissions and how to improve your building ...
-
Manufactured by Pro Refrigeration, Inc.based in USA
PROHeat2o uses a 2-step Heat Recovery Process that uses waste heat that is normally discharged into the atmosphere for heating water up to 140 degrees, heating facilities, and/or heating processes. All essential components of the system are Factory Installed within the standard ...
-
Manufactured by NESS Warmetechnik GmbHbased in GERMANY
Precise process temperature independent of the flow temperature in the network. With the secondary circuit, the heating parameters (temperature, temperature level, volume flows and pressures) can be optimally adapted to the requirements of the process. The temperature can be regulated very precisely and is therefore ideal for demanding ...
-
Manufactured by NESS Warmetechnik GmbHbased in GERMANY
Effective heat transfer between different medium. Heat exchangers are needed in a plant when heat energy has to be transferred between liquids (gas and liquids). In some processes, heat is generated as a by-product. With the help of the heat exchanger, this “lost” ...
-
based in GERMANY
How an oil company is increasing oil production and saving energy costs at the same time - An international oil production company faces the peak of production rate in one oil field in the Arabian Peninsula soon. In order to keep up the oil production rates the company decides to invest in Enhanced Oil Recovery (EOR) technology by injecting steam and extend the field?s lifetime. Along with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you