Pyrolysis Gas Equipment In Europe
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, ...
-
Manufactured by C-deg environmental engineering GmbHbased in GERMANY
The thermal degradation of organic substances under air exclusion is an alternative to AD plants in order to obtain an energetically utilizable gas from biomass. The wood- and pyrolysis gases resulting from these types of processes have a significantly different composition compared to biogas. Especially the high hydrogen content and the ...
-
Manufactured by Resource Recycling Industries GmbHbased in GERMANY
The pyrolysis gas out of rubber is a residual gas. Due to the low amount, it is not economic to store it but to use it directly for power production. The average heating value of BERAHN®-Gas is 10.5 ...
-
based in SWEDEN
In the gasifier the char powder is mixed with steam, heat is provided indirectly through radiation which enables the chemical reactions that form the energy gas. The heat is generated through combustion of the pyrolysis gas, simultaneously the tars are cracked into harmless components. The gasifier concept is similar to the well proven ...
-
based in SWEDEN
WoodRoll is based on combining the three processes: drying, pyrolysis and gasification: These three processes are linked to each other while keeping them physical separated. As processes are separated the impurities can be separated from the generated energy gas. The impurities leaves with the pyrolysis gas that is formed during ...
-
based in SWEDEN
WoodRoll is an allotherm process which means the heat (energy) needed to run the process is generated within the process itself. When combusting the pyrolysis gas heat is generated. The heat is utilized / recovered first at the gasification process which works at the highest temperature and then at the pyrolysis and dryer processes which ...
-
by AquaGreenbased in DENMARK
In the pyrolysis oven, dried biomass is heated to 650°C in an oxygen-free atmosphere. The process takes 20 minutes and eliminates harmful pollutants such as microplastics, medical residues, PFAS, and PAH. The decomposing of organic compounds releases pyrolysis gas, which is combusted in the gasburner. The produced thermal energy is ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Customised industrial gas flare with high-temperature combustion, conceived specifically for the disposal of industrial and contaminated gases. Ideal for combustible industrial gases, such as VOC gas, pyrolysis gas, wood gas, flue gas, benzene gas and much ...
-
based in UNITED KINGDOM
The LD range of flares is used for biogas de-gassing applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. The extracted gas is burnt in an enclosed flare stack in a controlled combustion process which, when required, ensures compliance with the UK ...
-
based in UNITED KINGDOM
The LG range of flares is used for combined biogas de-gassing and utilisation applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. They include systems for delivering gas at controlled pressure for power generation. That portion of extracted ...
-
based in UKRAINE
Capacity of the continuous pyrolysis complex unit: 2.5 t of waste per hour. The output product of the pyrolysis reaction is synth-gas, transformed into heat or electric power. CPCom-2.5 generates near 3 MW of electric power per hour. Search for more info here: ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
is housed in a robust and compact enclosure and offers a large variety of features such as on-board BTU calculation and a built-in sampling pump, calibration valves and printer. The typical applications are coal or biomass gasification or pyrolysis, synthesis gas, offgas from steel and iron making process such as blast furnace, coking, converter, ...
-
Distributed by Flex Technologies Limitedbased in UNITED KINGDOM
The gasification process includes four stages, each occurring in one of the four separate zones within the gasifier: drying, pyrolysis, oxidation and reduction ...
-
Manufactured by BDI-BioEnergy International GmbHbased in AUSTRIA
Since 2010, the innovative bioCRACK technology has been essentially driven forward by the cooperative alliance between the Austrian mineral oil company OMV and BDI. OMV supported the project with resources and subsequent processing of the materials, as well as evaluation of the liquid ...
-
Manufactured by Envigas ABbased in SWEDEN
The non-condensable phase of the Syngas produced in the pyrolysis process has a considerable heating value and is ideal for powering a boiler producing heat and power. Syngas can also be post-processed to become methane or ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
If the combustion air is heated upstream of the combustion process, the consumption of the support gas required for the combustion of lean gases can be significantly reduced. The necessary heat is taken from the exhaust gas and guided into the combustion chamber via heat exchangers. If the dimensioning is right, for example methane ...
-
Manufactured by Gastechnik Himmel GmbHbased in AUSTRIA
No gas is too hot for us: Technical innovations, test equipment, special requests - our technicians have long experience and are oriented towards your needs. Different technical procedures and burning systems, including complete control and regulation technology are possible. Mobile gas flares with integrated gas compressor and suction ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the ...
-
based in NETHERLANDS
The 350 l/d WMO pyrolysis plant efficiently converts waste motor oil into diesel, light oil/naphtha and gas. It is placed in a 20ft container so it is easily transportable to anywhere in the world. Installation is simple. All components are pre-installed in the container along with electric wiring & control panel. Ready for Plug-and-Play. ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
The controlled gas/air ratio in the combustion chamber ensures that a temperature of >1000 °C is always maintained in the combustion chamber. The flow rate in and the geometry of the combustion chamber ensure a minimum gas dwell time. During this time, any residual oxidizable compounds are oxidized as required in the German ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you