Recovered Energy Equipment
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat gas processing plant solutions transform waste heat from gas turbine exhaust into viable and valuable power. This ability reduces overall plant power consumption from the grid and provides a cost effective power ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Recovered Energy Generation (REG) Solutions for Gas Compressor Stations. Ormat is the only solution provider for energy recovery systems on gas pipeline compressor stations. Our Recovered Energy Generation (REG) units convert waste heat from the exhaust of gas turbine-driven compressors into electricity for sale ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat's Recovered Energy Generation (REG) solutions complement cement plant operations and generate cost-effective electricity from unused waste heat. Even in optimized cement plants, some heat is lost, either from exhaust gases, clinker coolers or both. Ormat's REG solutions capture the residual heat and use it to generate clean, ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
the potential to contribute to UK & Global energy generation and sustainable waste management. EfW, also known as Waste-to-Energy (WtE), involves producing heat and / or electricity by recovering the energy contained in the municipal solid wastes left after recycling and other industrial, agricultural, and forestry residues. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of ...
-
Manufactured by Compte.Rbased in FRANCE
The condenser makes it possible to recover energy from the fumes in order to increase the overall efficiency of the installation. It is placed downstream of the filtration system before the chimney. Compatible with any type of boiler and a fuel with a moisture more than 40%, this equipment guarantees the efficiency over 100% on LHV. ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
Microregen turbines allow you to recover energy from excess pressure where it does not exceed 25kW of usable electrical power. The turbines can be installed directly in-line on existing pipes and work under variable hydraulic ...
-
Manufactured by Tecnoturbines S.Lbased in SPAIN
This water turbine is able to recover energy while regulating the pressure at the outlet, similar to a pressure reducing valve. This water turbine offers the best efficiendy under variable hydraulic ...
-
Manufactured by Enex srlbased in ITALY
Enjector technology improves CO2 systems efficiency, by permitting the energy recovery of the high-pressure fluid outgoing the condenser/gas cooler. Thereafter, the recovered energy is used to obtain the so-called “zero overheating” in the evaporators, without incurring the cost and complexity related to the refrigerant ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Our moving bed heat exchanger technology is capable of cooling bulk solids from up to 2,000°C indirectly by conduction, consuming up to 90% less energy. It is engineered to handle substantial thermal stresses without cracking or damage, while offering guaranteed thermal performance for a superior end ...
-
Manufactured by Baumüller Nürnberg GmbHbased in GERMANY
Designed for four-quadrant operation, the b maXX mobil can brake in both directions and recover energy in addition to generating drive. For mobile use, the controller is vibration resistant and can be used in temperatures between -25 ° and + 65 ° Celsius. Communication takes place via CAN bus and digital inputs/outputs are ...
-
Manufactured by Eclipse, Inc.based in USA
Heat Exchanger can recover energy from an industrial exhaust with temperatures up to 1,200° F (650° C). The dimple plate design can be used for applications where the flows may include some ...
-
based in FRANCE
Charging robot Charles is a complete solution for charging electric vehicles. Charles works with second life batteries that allow it to store several doses of energy for one, two or three vehicles at each intervention. Charles recovers its energy from a charging base, installed onsite. It can connect to all the existing vehicles ...
-
Manufactured by SCHMIDTSCHE SCHACK, PART OF THE ARVOS GROUPbased in GERMANY
SCHACK® Flue Tube-Type Recuperator is installed to avoid the gases from reaching the cleaning systems with too high temperatures and at the same time to recover energy from hot flue gases. Read more about our SCHACK® Flue Tube-Type Recuperator solutions for carbon black processes or sludge incineration ...
-
Manufactured by Pingxiang Annareach Technology Co., Ltd.based in CHINA
Cordierite block is specified as extruded ceramic monolith with high temperature strength and chemical stability which has been widely applied in regenerative thermal processes to recover thermal energy also it can resolves RTO siloxane clogs in someway. Blockage are very unlikely thanks to the straight channel ...
-
Manufactured by Oschatz Power GmbHbased in GERMANY
In recent years, coke dry quenching has developed into an internationally accepted energy recovery process. The fundamental aim of coke dry quenching is to utilize a downstream process to recover energy from the hot cycle. The CDQ process is implemented in two stages: During the first (preliminary) stage, the heat from red-hot ...
-
Manufactured by Bry-Air (Asia) Pvt. Ltd.based in INDIA
Bry-Air's BryXchange is an air to air rotary heat exchanger which recovers energy from high temperature exhaust air. Considerable high temperature air is generated in kilns, ovens, furnaces etc. which generally goes waste. Through BryExchange this sensible waste energy can be recovered from the exhaust air and transferred to the ...
-
Manufactured by Kaishan Compressor USAbased in USA
Recovering energy from a waste steam stream can offer many facilities the opportunity to reduce their overall environmental impact. Steam screw expanders can recover heat energy by converting low-, medium-, and high-temperature steam into electrical energy. With a steam screw expander, power plants can accept ...
-
Manufactured by Eclipse, Inc.based in USA
for particulate fouling. The Dimple Plate Heat Exchanger can recover energy from an industrial exhaust with temperatures up to 1,200° F (650° C). The dimple plate design can be used for applications where the flows may include some particulate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you