Secondary Standard Pyranometer Equipment
-
Manufactured by M.B. Control & Systems Pvt. Ltd.based in INDIA
SR20 series pyranometers are of the highest category in the ISO 9060 classification system : Secondary Standard. This solar radiation sensor is used where the highest measurement accuracy is required. It measures the solar radiation received by a plane surface, in W/m2, from a 180o field of view angle. SR20 secondary ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
The pyranometer LP PYRA 10 measures the irradiance on a flat surface (Watt/m2). The radiation measured is the sum of direct solar irradiance and diffuse irradiance (global radiation). The LP PYRA 10 is a pyranometer classified as Secondary in accordance with ISO 9060 and according to the publication “Guide to Meteorological ...
-
Manufactured by Middleton Solarbased in AUSTRALIA
The Middleton EQ09-A is a precision pyranometer for the measurement of global solar irradiance on a plane surface. It exceeds the ISO 9060:2018 specifications for a Spectrally Flat Class A Pyranometer. It is also available as a Secondary Standard Pyranometer to superseded ISO 9060:1990. The EQ09-A has a precision ...
-
Manufactured by Middleton Solarbased in AUSTRALIA
incorporates a cosine-corrected entrance aperture, a compact integrating cavity, and an encapsulated thermopile with a Field-Of-View restricted to the cavity. The Middleton Solar ER08-S exceeds the ISO 9060:1990 specifications for a very high quality Secondary Standard Pyranometer. The ER08-SE version has an in-built amplifier with a millivolt ...
-
Manufactured by Soluzione Solarebased in ITALY
It is equipped with electronics to amplify a very weak signal coming from the thermopile, and mounted with the best operational amplifiers on the market in terms of linearity, noise immunity, consistent behavior over time and in temperature variations. The signal is normalized in the range 4 to 20mA. This analog output mode of the signal (current loop) is characterized by a simple wiring (cable ...
-
Manufactured by Soluzione Solarebased in ITALY
Ideal for scientific and meteorological use. It comes with RS485 Modbus output line suitable for distances up to 500m. It has a simpler construction than the Class B, but uses the same high quality materials. ...
-
Manufactured by Soluzione Solarebased in ITALY
The PYR1-485 is equipped with the electronics board with a microcontroller to manage sampling, average of sampling, temperature reading and RS485 transmissions. This helps to guarantee noise immunity and constant behavior over intervals of time and temperature variations. The output signal is in ModbusRTU over RS485. The carefully selected components have a constant behavior over time and for a ...
-
Manufactured by Soluzione Solarebased in ITALY
It has a simpler construction than the Class B, but uses the same high quality materials. As the Class C is equipped with the same electronics as the Class B, the signal has a high level of linearity and noise immunity. The signal is normalized in the 4 to 20mA range. This analog output mode of the signal (current loop) is characterized by a simple wiring (cable with 2 wires), and a high immunity ...
-
Manufactured by RainWise Inc.based in USA
The PVMet™ 150 offers a precise thermopile pyranometer for optimal performance alongside an adjustable Global or Plane-of-Array Irradiance Sensor, one or two Back-of-PV Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, and the option for an additional Irradiance Sensor. Simple to install on any solar project, the PVMet ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS320 is a digital thermopile pyranometer that measures broad-spectrum short-wave radiation and communicates over the simple SDI-12 protocol to the data logger. This sensor design eliminates measurement error and programming errors that can adversely affect data quality. This pyranometer has been designed to improve the global solar ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you