Small Hydropower Equipment
-
based in NEPAL
The power plant is located about 500m downstream of the confluence of Sunkoshi river with the Bhotekoshi River in Dhuskun VDC of Sindhupalchowk district. It is about 90 Km North -East of Kathmandu along the Aranikio Highway, on the way to Tibet. Glass Fibre reinforced Plastic Pipe was used as pressure pipe for the first time in the region in this ...
-
Manufactured by Sea-Lix ASbased in NORWAY
Small hydro has historically derived from scaling down conventional large and well established hydro power solutions. This has led to disproportionally high construction costs, in particular with regards to civil works and other necessary infrastructure. Sea-lix has approached the challenge from the core – designing a solution ...
-
Manufactured by KONCAR - Electronics and Informatics Inc.based in CROATIA
Equipment and solutions we offer are custom design and installation of equipment according to the individual customer’s needs, with the highest degree of operational safety and efficiency, environmentally friendly, high-performance, reliability and quality, long life and flexibility. We offer, in the early stages of the project, feasibility studies, the initial calculation of hydrology and ...
-
Manufactured by RenTech Global Solutionsbased in USA
This book "SMALL HYDROPOWER SYSTEMS” has been written according to the B.Sc., Renewable energy Management syllabus The subject matter had been discussed in 2 ch apters and sub units as under:chapter 1: introduction to Hydropower energy 2: Small Hydropower Systems. ...
-
Manufactured by S.W.H. GROUP SEbased in CZECH REPUBLIC
capacity up to 10 MW, including (NB. The European Union, however, considers MVE hydroelectric power to 5 MW). The vast majority of power hydro power (90%) is from plants with an output of more than 5 MW and the remaining 10% is made by the European MVE sorting. Coming projects associated with the construction of small hydropower plants up to 5 MW of ...
-
Manufactured by INSET Ltd.based in RUSSIA
Hydro units with axial type turbines (GA-1, GA-8, GA-8M, GA-14, Pr15, Pr30) and output up to 1800 kW; Hydro units with Francis type turbines (GA-2, GA-4, GA-9, GA-11) and output up to 5600 kW; Hydro units with Pelton type turbines (GA-5, GA-10, GA-10M, 200K) and output up to 3 300 ...
-
by Easy Hydrobased in IRELAND
-
Manufactured by Gess-CZ, s.r.o.based in CZECH REPUBLIC
We provide reconstruction and increase of capacity of existing WWTPs and sewerage systems, as well as modernization of existing components and ...
-
Manufactured by Gess-CZ, s.r.o.based in CZECH REPUBLIC
The first screw turbine in the world was designed and manufactured in 1997 in the Czech Republic. The construction uses an ancient pump called the Archimedean screw in reverse ...
-
based in ITALY
PAN-EU Small HydroPower Atlas (SHPA) is an user-friendly spatial decision support system for run-of-river hydropower plants feasibility and development across EU. The product innovation consists in making feasibility assessment much quicker and affordable, which may be a critical aspect in the development of small plants. ...
-
Manufactured by Turbotec Engineeringbased in BELGIUM
In Flanders and the Netherlands, as in other parts of Europe, special interest is given to small-scale hydropower turbines which are able to operate in relatively low water ...
-
Manufactured by REHART Groupbased in GERMANY
Hydropower systems with a screw belong to small-scale hydropower plants. Don’t be deceived by the term “small”. This technology provides power to 13 million European households. This saves the environment 29 million tons of ...
-
Manufactured by Tschurtschenthaler Turbinenbaubased in ITALY
Hydroelectric power stations for small hydropower plant is nowadays the ideal way for many companies and private persons for an autarchic energy supply. We have been specialising for years in this environmentally friendly sustainable energy recovery and we fulfill with our hydraulic turbines the most unusual customer requests. In our ...
-
Manufactured by OSSBERGER GmbH Co. KGbased in GERMANY
The patented OSSBERGER cross-flow turbine works with heads from 2.5 meters up to 200 meters. We developed this turbine especially for small hydropower. It is currently available with outputs of up to 10 megawatts. Even with very low water flows, it reliably delivers energy and copes perfectly with fluctuating water volumes. This is ...
-
Manufactured by Etaeval GmbHbased in SWITZERLAND
, storage pumps and pump turbines". This standard is worldwide used for complex measurements of hydraulic machines. For measurements in small hydropower plants the IEC standard 62006 "hydraulic machines - acceptance tests of small hydroelectric installations" is ...
-
Manufactured by Etaeval GmbHbased in SWITZERLAND
and pump turbines". This standard is used worldwide for highly accurate measurements of efficiency of hydraulic machines. For measurements in small hydropower plants the IEC standard 62006 "hydraulic machines - acceptance tests of small hydroelectric installations" is ...
-
based in ITALY
PAN-EU Small HydroPower Atlas (SHPA) is an user-friendly spatial decision support system for run-of-river hydropower plants feasibility and development across EU. The product innovation consists in making feasibility assessment much quicker and affordable, which may be a critical aspect in the development of small plants. ...
-
Manufactured by Hydrohrom, s.r.o.based in CZECH REPUBLIC
Regulation of the runner with runner blades fixed. Is the most frequently used machine for newly constructed small head hydropower plants. It is also used in the renovation of older plants originally equipped with vertical Francis turbines, which often achieves a better flow usage. The advantage is the low cost of the equipment. ...
-
Manufactured by HS DYNAMIC ENERGY CO.,LTD.based in HONG KONG
Pelton turbine generator is suitable to meet micro-sized, mini-sized and Small-sized hydropower project, and it’s efficiency is higher than turgo turbine, usually from 80%-89%, it is applicable for the hydraulic head range of ...
-
Manufactured by Ideal Electric Companybased in USA
IDEAL ELECTRIC is the US leader in small hydroelectric experience, with over 250 projects and 800 MW installed. Exclusive US single source company – capable of producing both generators and switchgear and allowing for sole sourcing of a coordinated electrical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you