Only show results available in Virginia? Ok

Small Hydropower Turbine equipment

  • Small-Scale Hydropower Plants

    The ANDRITZ HYDRO Compact Hydro Division is the world leader in products and services for small and medium-sized hydroelectric power plants up to a unit output of 10 MW for axial and Kaplan turbines and an output of 30 MW for Francis and Pelton turbines. Compact Hydro stands for “water to wire” solutions based on pre-designed modular ...

    By ANDRITZ Energy & Environment GmbH based in Raaba bei Graz, AUSTRIA. from Hydro Product line

  • Ronamic - Low Head HydroPower High Power Turbine

    This turbine is a typical application of the RONAMIC technology in rivers and water reservoirs with (existing) dams where there is an abundance of water. This RONAMIC turbine is designed with a special flow system for high flow and high power output. Despite a slightly lower turbine efficiency, the generated power is substantially higher than that ...

    By Ronamic based in CW Noordwijk, NETHERLANDS.

  • Small Hydro Power Plants

    CINK Hydro-Energy is your partner in designing and constructing complete hydropower stations

    By CINK Hydro - Energy k. s. based in Sadov, CZECH REPUBLIC. from Other Products Product line

  • Heidemann - Refurbished Turbines

    After World War II when the energy demand in Germany rose constantly the nuclear-energy-focused policies of the larger energy concerns were concentrated on eliminating small and smallest competitors. In addition in the 1950s and 1960s many mills and factories that had operated own hydropower stations were closed down or did not carry on operation ...

    By Heidemann Wasserkraftanlagen based in Burladingen, GERMANY.

  • Hydro Power Turbines

    Hydropower equipment technology has become the forefront of the energy conversion industry. Hydraulic turbine and shaft machining has taken on the role of energy conduction for many modern homes and business buildings. Canadian manufacturers have made modifying and maintaining these priceless machines a top professional priority. Hydropower ...

    By FAB 3R Inc. based in Trois-Rivières, QUEBEC (CANADA). from Hydro Power Equipment Product line

  • Rainpower - Control Systems for Small Hydro

    Rainpower AS, trough Hymatek Controls, is currently one of Scandinavia’s largest and most influential professional environments for turbine and voltage regulation. The company comprises experienced employees with solid professional expertise and experience, and young, highly trained and highly ambitious staff. Hymatek Controls delivers ...

    By Rainpower Norway as based in Kjeller, NORWAY.

  • Hydro Turbines

    Waterpumps WP Oy’s hydro turbines are designed for small hydro on low head sites. There are two main designs of turbines, tube and compact type. The designed head may vary from 1 to 30 meters and the flow of the unit can be fixed or regulated. Many of the plants designed for WP Oy’s products are equipped with several turbine generators ...

    By Waterpumps WP Oy based in Helsinki, FINLAND.

  • Rainpower - Small Hydro Plant

    Rainpower started to focus on small hydropower plants in 2009. However, our employees have many years’ experience in the construction of small-scale power pre-dating Rainpower’s existence, gained at Kværner and at the workshop in Sørumsand. Rainpower’s small-scale power solutions are essentially based on the ...

    By Rainpower Norway as based in Kjeller, NORWAY.

  • Canyon Hydro - Turbines Systems

    Designed for maximum efficiency and reliability; Hydroelectric systems from Canyon Hydro deliver exceptionally high efficiency and reliability.  Built for continuous, uninterrupted power generation, they deliver a high return on your investment year after year.

    By Canyon Hydro based in Deming, WASHINGTON (USA).

  • Small Hydro Power

    In order to realize the full potential of small hydropower plants, the whole value chain from water to wire has to work efficiently. This requires a high degree of coordination. Siemens is the only integrated energy company that serves the entire energy conversion chain with products, solutions, and services. We are globally renowned for our ...

    By Siemens Energy, Inc. based in Erlangen, GERMANY.

  • Radial Turbine Seal

    Radial type seals are used in hydroelectric turbines, pump-turbines and large pumps. The primary purpose of a mechanical radial shaft seal is to maintain a near watertight seal between the turbine shaft and the head cover. Depending on the pressure under the seal, two or more carbon segmented sealing rings are required. This seal is reliable, ...

    By Fugesco Inc. based in Pointe-Claire, QUEBEC (CANADA).

  • Scott - Cross Flow Turbine/Generator Unit

    Unlike most water turbines, which have axial or radial flows, in a cross-flow turbine the water passes through the turbine transversely, or across the turbine blades. As with a water wheel, the water is admitted at the turbine's edge. After passing the runner, it leaves on the opposite side. Going through the runner twice provides additional ...

    By Scott Hydroelectric based in WASHINGTON (USA).

  • Etaeval - Thermodynamic Efficiency Measurements

    Thermodynamic efficiency measurements are performed to determine the absolute efficiency of hydraulic machines. The procedure for such a measurement is described in detail within the IEC (International Electrotechnical Commission) standard 60041 'field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and ...

    By Etaeval GmbH based in Horw, SWITZERLAND. from Measurements Product line

  • Heidemann - Micro Hydro Stations For Remote Areas

    Building a hydropower plant, even small hydro plants, in almost all cases is a project which requires a larger investment. Again the omnipresent question of feasibility often rules out minor projects even if the realization would be a success for the area. Not the production of electricity only but as well operating pumping stations and water ...

    By Heidemann Wasserkraftanlagen based in Burladingen, GERMANY.

  • Hydroelectric - Micro Hydro System

    Micro/Mini hydro is the application of hydroelectric power sized for small communities, single families or small enterprise. It is a renewable technology based on capturing the kinetic energy of rivers, channels or chutes, spillways, irrigation systems, tides and oceans with or without the use of dams. Not everyone is lucky enough to have a source ...

    By D & R Energy Services, Inc based in Brighton, MICHIGAN (USA).

  • Model RiverStar - Self-Contained Energy Module

    Bourne’s RiverStar (U.S. Pat. No. 7,492,054 B2 and U.S. Pat. No. 8,102,071 and numerous international patents) Kinetic Energy System is a self-contained energy module composed of a stabilizer, energy absorber, energy transmission and mooring system and energy conversion and control system. It is designed to be sited in-river in ...

    By Bourne Energy based in Malibu, CALIFORNIA (USA).

  • Model With a short-circuit armature GAK series - Asynchronous Generators

    GAK series of asynchronous generators with a short-circuit armature is suitable for all types of hydro turbines with outputs up to 1.5 MW. This series meets the specific requirements for alternators intended for this application. The main features are robust construction and sufficiently dimensioned machine parts. The rotor is executed with regard ...

    By TES VSETIN s.r.o. based in Vsetín, CZECH REPUBLIC. from Electric Machine Product line

  • Entec - Model DTC-Vario - Digital Control System

    The digital control system DTC-Vario is the most recent development of entec for controlling, supervision, protection, data acquisition and visualisation of small hydro power stations. Based on a hardware from SAIA, entec developed the appropriate software. Entec’s long term experience in the field of small hydro power stations is reflected ...

    By Entec AG Consulting & Engineering based in St Gallen, SWITZERLAND.

  • Model With a smooth rotor – GSH With salient poles – GSV - Synchronous Generators

    Synchronous generators are among theTEM division’s products in highest demand. They are suitable for all types of hydro turbines with outputs up to 20,000 kVA. In spite of the product’s common characteristics,it is a customized product manufactured according to requested parameters for each specific application. The machine design is ...

    By TES VSETIN s.r.o. based in Vsetín, CZECH REPUBLIC. from Electric Machine Product line

  • Magnetic Fan Motor

    When electricity is applied to a magnetic fan motor it makes the fan spin, but did you know the reverse also true? If you spin the fan blade backwards it produces electricity. Water pressure is energy, and by using the pressure and flow created by gravity found in places like common water pipes to spin the fan, it transforms ...

    By ClearPower North America based in Castle Rock, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you