solid oxide fuel cell Equipment

Solid Oxide Fuel Cells

We provide mass manufactured planar, solid oxide electrode-supported cells (SOC) operating at 600-800°C. Elcogen cells are the market’s most efficient solid oxide technology, suitable for fuel cell and electrolysis operation. ...

By Elcogen AS based in Tallinn, ESTONIA. from ElcoCell Product line

Model SOFC - Solid Oxide Fuel Cell

Regarding stationary fuel cells we are your industrialization partner for SOFC (Solid Oxid Fuel Cell) systems. We offer testing solutions for development and production of SOFC cell stacks. Our full stack and short stack test benches are designed for function tests and validation ...

By Robert Bosch Manufacturing Solutions GmbH based in Stuttgart, GERMANY.

Solid Oxide Fuel Cells (SOFC)

OxEon personnel have been developing solid oxide technology since the 1980s. Solid Oxide Fuel Cells have a number of distinct advantages over other fuel cell types, such as silent operation with no moving parts, fuel ...

By OxEon Energy, LLC based in North Salt Lake, UTAH (USA).

FuelCell Energy - Model SOFC - Solid Oxide Fuel Cell Systems

Solid oxide fuel cell (SOFC) systems will be capable of running as an electrolyzer for hydrogen production or as a fuel cell for electricity production. The 250 kW fuel cell will be capable of running on a wide range of fuels including natural ...

By FuelCell Energy, Inc. based in Danbury, CONNECTICUT (USA). from Distributed Power Generation Product line

Reversible Solid Oxide Fuel Cells (RSOFCs)

Our technology is based on Reversible Solid Oxide Fuel Cells (RSOFCs) One device that can be operated in 2 modes. Solid oxide electrolysis cell (SOEC) mode: SOECs utilize power and heat to convert CO2 and/or water to produce fuels such as carbon ...

By SeeO2 Energy based in Calgary, ALBERTA (CANADA).

Model WATT Imperium - Solid Oxide Fuel Cell (SOFC) System

WATT Imperium’s™ Solid Oxide Fuel Cell (SOFC) System automatically, efficiently and quietly provides clean power on demand—no engine noise, no exhaust. The Imperium™ creates power from readily-available and easily-accessible hydrocarbon fuels and renewable energy sources. Power that ...

By Watt Fuel Cell based in Mount Pleasant, PENNSYLVANIA (USA). from On-Demand Power Product line

Solid Oxide Stacks for Fuel Cell Systems

Whether you are building a CHP system or off-grid genset, the elcoStack provides the highest efficiency power generation. Your system can run on e.g. biogas or natural gas today and on hydrogen in the future, providing low OPEX and protecting your investment. ...

By Elcogen AS based in Tallinn, ESTONIA. from ElcoStack Product line

FuelCellMaterials - Model LSCF-I - Lanthanum Strontium Cobalt Ferrite Ink

The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...

By Fuel Cell Materials, Division of Nexceris Company based in Lewis Center, OHIO (USA). from SOFC - Inks Product line

FuelCellMaterials - Model LSCF-I - Lanthanum Strontium Cobalt Ferrite Ink

The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...

By Fuel Cell Materials, Division of Nexceris Company based in Lewis Center, OHIO (USA). from SOEC - Inks Product line

Clean TeQ - Advanced Lightweight Alloys

of scandium in solid oxide fuel cells. ...

By Clean TeQ Holdings Limited based in Notting Hill, AUSTRALIA.

Model BI-0750 - Bismuth Oxide

Synonyms - Bismuth(III) Oxide; Dibismuth Trioxide. Market Focus - Solid Oxide Fuel Cells, Electro-Ceramic Powders. Bismuth Oxide Physical Properties: Molecular Weight: 465.96 g/mol. Typical Purity: 99.9 - 99.999. Form: yellow powder. Theoretical Density: 8.9 g/cm³. Melting Point: 817ºC ...

By Lorad Chemical Corporation based in St. Petersburg, FLORIDA (USA). from Battery Materials Product line

LEANCAT - Model STS-10 - Fuel Cell Test Station

Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...

By LEANCAT s.r.o. based in Praha, CZECH REPUBLIC. from Test Station Product line

Ceramics for Fuel Cells

of fuels. SOFC (Solid Oxide Fuel Cells) run at high temperature with a ceramic electrolyte – typically 800°C to 1,100°C – and can operate continually at these temperatures in a highly efficient manner once they reach ...

By Precision Ceramics USA. based in St. Petersburg, FLORIDA (USA). from Environmental Industry Product line

Solid Oxide Electrolysis Cells (SOEC)

OxEon Energy has modified its solid oxide fuel cell technology to provide a stable, reliable electrolysis stack to produce hydrogen from steam electrolysis or synthesis gas (i.e. hydrogen and carbon monoxide) from water vapor (steam) and carbon dioxide co-electrolysis. The solid oxide ...

By OxEon Energy, LLC based in North Salt Lake, UTAH (USA).

Stainless Ateels Alloys

Special stainless steels represent a material group that is situated between the non-corrosive steels and the nickel alloys. These iron-nickel-chromium alloys differ from the ordinary non-corrosive steels by their higher alloying additions of nickel, chromium or molybdenum. Many corrosion-resistant alloys, such as VDM® Alloy 31, VDM® Alloy 800 H or VDM® Alloy 926, whose main alloying ...

By VDM Metals International GmbH based in Werdohl, GERMANY. from Other Alloys Product line

Stanford - Model OX1509 - Nano Cerium Oxide Powder

Stanford Materials Corporation (SMC) is a trusted supplier of Nano Cerium Oxide ...

By Stanford Materials Corporation (SMC) based in Lake Forest, CALIFORNIA (USA). from Oxides - Cerium Oxide Product line

Stanford - Model OX1510 - Nano Dysprosium Oxide Powder

Stanford Materials Corporation (SMC) is a trusted supplier of Nano Dysprosium Oxide ...

By Stanford Materials Corporation (SMC) based in Lake Forest, CALIFORNIA (USA). from Oxides - Dysprosium Oxide Product line

EBZ - Demonstration Systems

Fuel cells are expected to become a key technology of the future decentralised energy supply with combined heat and power (CHP) units. Therefore the EBZ Demonstration Systems provide a flexible platform for a large variety of research and application ...

By EBZ GmbH based in Dresden, GERMANY. from Fuel Cells Product line

Precision Micro - Bipolar Plate

We offer a market-leading bipolar plate manufacturing service, working in collaboration with leading sustainable energy providers developing fuel cells and electrolysers for mobility, power, heat and ...

By Precision Micro based in Birmingham, UNITED KINGDOM.

OptiFormer - Fuel Processor Systems

of fuels, e.g. natural gas, LPG, ethanol, methanol, diesel, kerosene and jet-fuel (JP8). We have reformers for SREF (Steam Reforming), CPO (Catalytic Partial Oxidation), ATR (Autothermal Reformer) and combination of the different reforming technologies ...

By Catator AB based in Lund, SWEDEN. from Fuel Processor & Fuel Cell Systems Product line