Spiral Heat Exchanger Equipment
-
Manufactured by Gooch Thermal Systemsm, Incbased in USA
Gooch Thermal Systems, Inc. is the largest American manufacturer of spiral heat exchangers. We custom-design spiral heat exchangers that are cost-effective, energy saving solutions to difficult heat transfer problems. Spiral heat ...
-
Manufactured by Sunpower Groupbased in CHINA
Spiral Plate Heat Exchanger is an assembly of two or more long sheets, usually separated by studs, wrapped to form concentric spiral channels. Turbulent flows occur in the spiral channels at lower Reynolds number due to the studs and centrifugal force and a higher heat transfer coefficient is ...
-
Manufactured by Nexson Groupbased in FRANCE
Sludge spiral heat exchangers are specially designed for digester sludge heating and heat recovery applications, such as digested sludge heating, raw sludge heating and heat recovery from effluents, pasteurisation, ...
-
Manufactured by Sunpower Groupbased in CHINA
LNG Plant & Coal Chemical Industry. Liquefaction Condenser. DN2600*10,000mm, 28tons. SS304. A spiral-wound heat exchanger (SWHE) comprises multiple layers of tubes wound helically around the central core (mandrel) with a constant longitudinal pitch. The coiling direction alternates from one layer to the next. Radial distances between ...
-
Manufactured by Graham Corporationbased in USA
The Graham Heliflow Heat Exchanger is uniquely designed and engineered to handle difficult heat transfer applications. Graham created the Heliflow to be exceptionally versatile, yielding heat transfer rates that can be more than 40% better than typical shell and tube designs. The Heliflow Heat ...
-
Manufactured by Ventilator Klima Tehnikabased in CROATIA
Spiral finned heat exchangers are most usually used as air heaters/coolers in which working fluid is usually hot water, steam or ...
-
Manufactured by Nexson Groupbased in FRANCE
Thanks to its specific design, the liquid to liquid heat exchanger can handle one or two fouling fluids. Both channels are easy to access for inspection and cleaning. Your alternative to the shell and tube heat exchangers ! This SPHE model is specifically designed to handle up to 200 barg / 450°C for tough ...
-
Manufactured by Nexson Groupbased in FRANCE
The vapor circulates, cross flow, in a fully opened channel, with negligible pressure drop and the coolant circulates in a closed spiral channel. The column is made of several spiral heat exchanger welded in series in the same shell to achieve large condensing duties. It is perfectly suitable for vacuum condensation with ...
-
Manufactured by Nexson Groupbased in FRANCE
Thanks to its specific design, the liquid to liquid heat exchanger can handle one or two fouling fluids. Both channels are easy to access for inspection and cleaning. Your alternative to the shell and tube heat exchangers ...
-
Manufactured by Nexson Groupbased in FRANCE
Able to work in extreme conditions (of pressure and temperature), this single channel heat exchanger, with self-cleaning effect, has become the alternative to the shell & tube exchangers. More compact and until 3 times more thermally efficient, the Spiral Plate Heat Exchanger gives the ...
-
Manufactured by Nexson Groupbased in FRANCE
The vapor circulates, cross flow, in a fully opened channel, with negligible pressure drop and the coolant circulates in a closed spiral channel. Thanks to its versatile design, it can be directly installed on the top of a column/rector without any supporting system, reducing quite much installation costs. It is perfectly suitable for ...
-
Manufactured by Firma Bartosz Sp. Jbased in POLAND
VENA Standard recuperators based on a spiral heat exchanger and designed as mechanical supply and exhaust ventilation systems with heat recovery for single-family buildings. Our offer includes two ...
-
Manufactured by Maris Projects B.V.based in NETHERLANDS
products. Beside this own design, we are also dealer in heat exchangers. We can offer you models in the range of plate heat exchangers, tube heat exchanger and spiral heat exchangers. Beside new heat exchangers, ...
-
Manufactured by KAORI Heat Treatment Co., Ltd.based in TAIWAN
Z series is designed with diagonal flow pattern, featured in high efficiency and wide range of application. It can be used to replace tube, shell and spiral heat exchangers. The unique pattern of diagonal flow utilizes the transfer area on the plate and refrains the risk of freezing, resulting from water remaining on the corner of ...
-
Manufactured by VAU Thermotech GmbH & Co. KGbased in GERMANY
The hybrid heat exchanger is a special plate heat exchanger covering nearly all industrial applications. It is suitable for chemistry, petro chemistry, sugar-, food- and pharmaindustry, and many more. This heat exchanger unites the conventional tubular-, plate- and spiral ...
-
Manufactured by KASAG Swiss AGbased in SWITZERLAND
Tube bundle heat exchanger, double-pipe heat exchanger and spiral pipe heat exchanger You state your requirements and send us the material properties. KASAG then configures the thermal and hydraulic calculations for the desired heat exchanger. ...
-
Manufactured by Firma Bartosz Sp. Jbased in POLAND
VENA Silver recuperators: 85-92% heat recovery from the air handling unit, efficiency: from 350 m3/h to 1250 m3/h, leak-proof spiral and counter flow heat ...
-
Manufactured by Chromagen Ltdbased in ISRAEL
Chromagen’s commercial tanks are specifically designed for industrial projects, and supplied with single or double heat exchangers. Our wide range of tank sizes are manufactured up to 3000 liters. The tanks may be supplied with indoor or outdoor covers for various installation ...
-
Manufactured by ITM Heat Transferbased in SPAIN
Cooling of wort carried on after cooking and before fermentation in whisky production is an essential part of the process, since the working temperatures range is very tight, and at higher temperatures, it happens a reduction in the fermentation power, as well as a loss of evaporated alcohol and a reduction of the ...
-
by Statoilbased in NORWAY
Liquefaction offers a unique solution for transporting natural gas located in areas far from a pipeline infrastructure. LNG stands for liquefied natural gas, and is produced by cooling down natural gas below its dew point. Methane usually accounts for about 85-95% of LNG, which may also contain other hydrocarbons such as ethane, a little propane and butane (natural gas liquids) and traces of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you