Only show results available in Virginia? Ok

Steam Turbine equipment

  • Model DHI / DL - ML 300 MW - 850 MW - Steam Turbines

    Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction blading.

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Model HIC / DL - ML 100 MW - 500 MW - Steam Turbines

    This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles ...

    By Franco Tosi Meccanica S.p.A. based in Legnano (MI), ITALY. from Steam Turbines Product line

  • Steam Turbines

    Mitsubishi Hitachi Power Systems America – Energy and Environment, Ltd. has been a steam turbine supplier since 1933 and has since accumulated significant experience in the design of STG sets for both thermal and nuclear power plants.

    By Hitachi Power Systems America, Ltd. (HPSA) based in Basking Ridge, NEW JERSEY (USA). from Power Generation Equipment Product line

  • Shin Nippon - Model Type C - Condensing Multistage Steam Turbine

    With turbine exhaust pressure a vacuum, the condensing multistage turbine is a high-efficiency, high output model capable of fully converting the thermal energy of steam to velocity, without loss. This series of products are known as 'multistage' steam turbines and are characterized by two or more rotor discs mounted on the shaft. The number of ...

    By Shin Nippon Machinery Co., Ltd. based in Tokyo, JAPAN. from Steam Turbines Product line

  • Elliott - Multi-Valve Steam Turbines

    Elliott steam turbines provide proven reliability and high efficiencies for mechanical drive or power generation services. We offer a complete line of steam turbines ranging up to 140,000 HP (100,000 kW).

    By Elliott Group based in Jeannette, PENNSYLVANIA (USA). from Steam Turbines Product line

  • Frontline BioEnergy - High Pressure Steam Turbines

    Frontline BioEnergy’s gasification system with steam turbines offers the highest reliability and operational utilization of any biomass system on the market.  In comparison to other fuels, the ability to fire a clean producer gas enables our technology to maintain a significantly higher utilization and lower operating cost than other ...

    By Frontline BioEnergy, LLC based in Ames, IOWA (USA). from Electric Power Generation Product line

  • Boiler and Steam Turbine Technology

    Biomass Engineering are working with leading Technology Suppliers and Engineering Procurement & Construction (EPC) contractors to provide Technical Solutions for the Biomass CHP market. The projects already in construction use the Combustion Grate, Steam Boiler, Steam Turbine and Generator to convert the energy in the fuel into both power and ...

    By Biomass Engineering Limited based in Newton-le-Willows, UNITED KINGDOM.

  • Steam Turbine Deposit Collector/Simulator

    A simple inexpensive device located outside the turbine, for the collection of exfoliated oxides and deposits representative of deposition inside the turbine.  The collected deposits are analyzed to predict deposition and corrosion inside the turbine, and to assess boiler carry-over and the effects of steam and water chemistry upsets. The ...

    By Jonas Inc. based in Pomfret, MARYLAND (USA).

  • Natural Gas Alloys for Balance of Plant and Steam Turbines

    ATI has a wide range of alloys for balance of plant applications and steam turbines. We are a recognized leader in the development and supply of alloys for steam turbine components and tubing for heat exchangers and condensers. As a producer of a wide range of corrosion resistant alloys, we can meet the requirements of virtually any tube or pipe ...

    By Allegheny Technologies Incorporated (ATI) based in Pittsburgh, PENNSYLVANIA (USA). from Natural Gas Power Generation Product line

  • Model ETG I and ETG II - Gas Expansion Turbines

    ETG I and ETG II gas expansion turbines serve for effective reduction of gas pressure in gas regulation and valve stations of gas distribution networks, in underground gas storages, chemical plants, systems of compressed mine gas, cold and hot air, nitrogen, etc. Gas expansion turbines are turbo-sets whose design is based on the STG I and STG II ...

    By PBS ENERGO, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Turbines Product line

  • Pelton Turbines

    These turbines are particularly suitable for exploiting plant conditions where there is a low flow utilisation as compared with the water head. Situations where reaction turbines would have excessive speed and would encounter particularly serious problems such as cavi-tation. One of the most interesting aspects of the Pelton turbine is its ...

    By Orengine International Ltd. based in Lavagna, ITALY. from Hydro Turbines Product line

  • Model 9FA - Heavy Duty Gas Turbine

    The most experienced F-class 50 Hz product. First introduced in 1992, the 9FA heavy duty gas turbine is a popular choice for combined cycle, cogeneration, or simple cycle plants where flexible operation and high performance are prime considerations. Designed for 50 Hz applications, this advanced technology turbine delivers power with high ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Heavy Duty Product line

  • Gas Turbine Bypass Systems

    A gas turbine bypass system diverts flue gases from the Heat Recovery Steam Generator (HRSG) in combined cycle mode to a bypass stack with a silencer assembly to operate in simple cycle mode. Maintenance can then be performed on the HRSG as the diverter isolates it completely from the gas turbine.

    By Innova Global Limited. based in Cambridge, ONTARIO (CANADA). from Gas Turbine & Recip Engine Applications Product line

  • Model 9E - Heavy Duty Gas Turbine

    The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Heavy Duty Product line

  • Model OptiGas - Air / Steam Blown Gasifier with Gas Turbine

    Only gasification allows to convert solid biomass to reach high efficiency in combined heat and power generation in the decentralized sector. Due to this Seenova has developed an fluidized bed gasifier which was optimized and tested and ready for market entry.

    By Steenova UG & Co KG based in München, GERMANY.

  • Gas Turbine

    In Gas Turbine based Cogeneration is a natural gas (or diesel) turbine coupled with an electrical generator which produces electricity. The exhaust heat from the gas turbine is directed to a waste heat recovery boiler ('WHRB'). Here the heat from gases trapped and steam is produced. This steam can be used for process or for power generation. The ...

    By Anama Energies Pvt. Ltd. based in Pune, INDIA.

  • Steam Power Plants

    In steam power plants, the thermal energy contained in water vapour is used to power a steam turbine which in turn drives the generator. In the process, conventional fuels such as oil, natural gas, hard coal or brown coal are used to fire the steam boiler. In coal-fired power plants, coal is the only fuel used, whereas waste incineration ...

    By Sauer Compressors based in Stevensville, MARYLAND (USA). from Power Generation Product line

  • Superheated Steam Boiler

    CONDOR saturated steam boilers can also be supplied as superheated steam boilers. Steam superheating prevents condensate from prematurely forming in pipework and turbines, and will contribute to load increases due to greater thermal gradients and larger steam volumes at the same boiler pressure in power stations. Depending on the required steam ...

    By VKK Standardkessel Köthen GmbH based in Köthen, GERMANY. from CONDORBOILER Plants Product line

  • GE - Model GE LM2500 - LM Series - Gas Turbines

    ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. Availability for the ...

    By ap+m based in Boynton Beach, FLORIDA (USA).

  • AxCYCLE - Steam Cycles Software

    AxCYCLE from SoftInWay lets you model every phase of the design for electrical and thermal power generation with a steam cycle analysis.

    By SoftInWay Inc. based in Burlington, MASSACHUSETTS (USA). from AxCYCLE Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you