Substation Equipment Equipment
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
Panel equipment is a set of devices that provide electricity to a specific building and structure. It is used both in industrial, public facilities and in residential buildings (private and multi-apartment). Correct selection of electrical switchboard equipment guarantees reliability and safety during its operation and maintenance. And it ...
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
The models of complete switchgears designed by our designers are designed for regulation by asynchronous and synchronous electric motors in circuits that are not affected by atmospheric overloads. The use of built-in models is carried out in closed rooms with natural ventilation without artificially controlled climatic conditions, where fluctuations in temperature and humidity, as well as the ...
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
The active part of a transformer is a structural part , which includes high and low voltage windings with electrical insulation, structural parts of control devices, the transformer core and all parts that provide a mechanical connection of these ...
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
Medium voltage equipment (6-35 kV) is complex systems and their elements required for the distribution of electricity to the end consumer. First of all, these are 6-35 kV air and gas-insulated switchgears, as well as components for the production of these ...
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
Power electrical equipment are devices that are used to receive, meter, consume and distribute electrical energy. The most common equipment is: pumps; fans; electric motors; power semiconductor ...
-
Manufactured by Unitech Power Technology Co., Ltd.based in CHINA
The monitoring of substation equipment and environment is a safety challenge that must be addressed. Personnel at a centralized control center need the capability to monitor the status of remote substation equipment and environment. The Substation Video Monitoring System is one solution to safely managing remote ...
-
Manufactured by Hangzhou Yongde Electric Appliances Co.,Ltdbased in CHINA
Composite Surge Arresters can be applied to a variety of systems including substation equipment, AC-DC converters, railway power system and power distribution units ranging from 0.25kV to 765kV systems. These surge arresters demonstrate excellent protection properties. Metal oxide type surge arresters offer such special features ...
-
Manufactured by Hangzhou Yongde Electric Appliances Co.,Ltdbased in CHINA
Composite Surge Arresters can be applied to a variety of systems including substation equipment, AC-DC converters, railway power system and power distribution units ranging from 0.25kV to 765kV systems. These surge arresters demonstrate excellent protection properties. Metal oxide type surge arresters offer such special features ...
-
Manufactured by IPEC Ltdbased in UNITED KINGDOM
and easily, from any remote computer. Suitable for all types of substation equipment, the ASM proves a powerful tool to an asset manager, providing continuous on-line condition data at the touch of a ...
-
Manufactured by AWG - American Wire Groupbased in USA
Used for overhead electrical distribution lines, ground ing electrical substations, electrical test equipment and any other electrical system. Suitable for numerous other ...
-
Manufactured by Point Eight Power Incbased in USA
Point Eight Power offers a wide array of equipment for medium-voltage marine applications including metal-clad generator control and distribution switchgear, engine/generator control panels and substations. Our marine equipment can be manufactured to meet ABS, U.S. Coast Guard, Lloyd’s of London, DNV, SOLAS or IMO standards. In ...
-
Manufactured by LLC “Eknis-Ukraine”based in UKRAINE
Company “Eknis-Ukraine” performs full range of activities (design, manufacture, supply, installation and adjustment) on commissioning and modernization of relay protection appliances at electric power stations and 35-750 kV substations. We offer equipment by leading international and domestic manufacturers depending on ...
-
Manufactured by Stored Energy Systems LLCbased in USA
Together with a battery system, SENS F3 charger provides non-stop filtered DC power for automated control systems, communications equipment and substation switchgear. F3 operates from a three-phase source, and can provide higher output power than the EnerGenius IQ ...
-
Distributed by Holtab ABbased in SWEDEN
Equipped with RMU switchgear selected by the customer. The transformer stations fulfil arc fault requirements according to substation standard IEC 62271-202 type A and B. When RMU switchgear requires pressure relief, this takes place through channels in the transformer compartment. Can be delivered with a pre-mounted transformer. The size ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor has ample railway industry experience, enabling it to carry out electrification, signalling, interlock, communications and control system turnkey projects for railways, metros, trams and trolley ...
-
Manufactured by Ingeteambased in SPAIN
INGESAS IC3 is the unit that allows connection to the main telecontrol centres and runs the logic at substation level. It is a high-performing, highly-reliable and highly-available modular system designed for substation environments, which enables the inclusion of different communications modules with the option of power supply or ...
-
Manufactured by Netcontrol Oybased in FINLAND
The Netcon GW502-iM is a compactly packaged gateway and protocol converter built specifically for harsh substation environments. A standalone device without a rack, it can easily be duplicated to form a redundant, fault-tolerant ...
-
Distributed by Holtab ABbased in SWEDEN
Equipped with NAL/NALF apparatus, with maintenance interval 15 years. Arc fault tested according to substation standard IEC 62271-202 type A and B. NAL/NALF apparatus is always installed on the back of the compartment. This provides you the customer with: – plenty of space to work in the station when e.g. connecting your medium ...
-
Manufactured by Eaton Corporationbased in USA
Over the last decade, the Substation Modernization Platform (SMP) Gateway has been recognized as one of the most efficient and reliable substation gateways on the market. It has been used successfully in thousands of substations to perform data acquisition and distribution, protocol translation and to provide secure remote access to ...
-
Manufactured by ERLPhase Power Technologies Ltd.based in CANADA
TESLA 4000 is an easy-to-use and cost effective, state of the art, multi-time frame (simultaneous) power system monitoring recorder. The integrated Phasor Measurement Unit (PMU) functionality streams synchrophasor data for wide area monitoring. The TESLA creates records simultaneously in three time domains - fault (fast), dynamic swing (slow) and trend records and also creates event logs. The CDR ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you