Thermal Vapor Recompression Equipment
-
Manufactured by Alaquabased in USA
In multiple-effect evaporators with TVR, the heating medium in the first effect is the product vapor from one of the associated effects, compressed to a higher temperature level by means of a steam ejector (TVR). The heating medium in any subsequent effect is the vapor generated in the previous effect. Vapor from the final effect is ...
-
Manufactured by Swenson Technology, Inc.based in USA
Swenson thermal vapor recompression (TVR) evaporators use a thermocompressor to reduce the steam required per pound of evaporation—ultimately reducing energy consumption and saving ...
-
Manufactured by Custom Fabricating & Repair, Inc.based in USA
MVR (mechanical vapor recompression) and TVR (thermal vapor recompression) designs are available to optimize initial capital cost, energy efficiency, and Return on ...
-
Manufactured by GIG Karasek GmbHbased in AUSTRIA
The thermal vapor recompression (TVR) builds on the same principle as the mechanical alternative, but uses only a portion of the resulting vapor for heating the system. The compression of the steam for heat recovery takes place in a steam jet pump. This is usually designed for a specific operating point and works on the jet pump ...
-
based in SWITZERLAND
In TVR systems, part of the vapour generated in the evaporator is combined with high-pressure steam in the Thermal Compressor (“booster”). The resulting vapour stream is the evaporator heating medium. TVR can be combined with MEE, to increase the operation’s energy efficiency. Theoretically, a TVR single effect unit ...
-
Manufactured by Sondex A/S - Member of the Danfoss Groupbased in DENMARK
Our SONDEX plate evaporators are designed to handle advanced evaporation duties. Using semi-welded plate cassettes, the media are guaranteed to never mix. The plate cassettes are designed to ensure the optimal level of turbulence on both sides while providing an even distribution of the media for superior performance and product quality. Our standard, semi-welded, and brazed SONDEX® plate ...
-
based in SWITZERLAND
If raw brine as feed and low pressure steam for heating is available, the Multi-Stage Vacuum system is preferred. Purity levels can be set by the application of the adequate elutriation and purge ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you