Only show results available in Virginia? Ok

Thin-Film Solar equipment

  • Thin-Film Solar Modules

    The comprehensive product portfolio for manufacturing thin-film solar modules from Manz sets international standards for increased efficiency while lowering production costs. In contrast to crystalline solar technology, in thin-film solar technology the semiconductor is deposited on a glass substrate. This technology is named for the fact that the ...

    By Manz AG based in Reutlingen, GERMANY. from Solar Product line

  • Model CIGS - BIPV Thin-Film Solar Modules

    Manz has decades of experience in the manufacture and installation of CIGS thin-film solar modules (CIGS = Copper Indium Gallium Diselenide). With this knowledge, we support you in your BIPV projects and together with our partners offer not only the right thin-film solar modules, but also complete, individually tailored system solutions.

    By Manz AG based in Reutlingen, GERMANY. from Solar Product line

  • Micromorph Thin-Film Solar Cells

    Micromorph thin-film solar cells combine both amorphous and microcrystalline silicon in one cell and belong to the group of the so-called multi-junction cells for which two (tandem cell) or more semiconductor layers are deposited alternately one above the other. As for micromorph silicon tandem cells, the absorption spectra of amorphous and ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CdTe Thin-Film Solar Cells

    CdTe thin-film solar cells are composed of a transparent conductive front contact layer,a thin n-conducting CdS-layer, a p-conducting CdTe absorber layer and a metallic back contact. The preferred substrate material is glass, just like with a-Si/µc-Si and CIGS thin-film cells. However, the use of metal strip and polymer films (PI) is also ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CIS Thin-Film Solar Cells

    The basis of a CIS thin-film solar cell is a compound semiconductor based on copper, indium, selenium and/or sulfur – CuIn(Ga)(Se, S)2. The p‑conducting CIS layer of up to 3 μm thickness is combined with an n‑conducting CdS‑buffer layer (up to 50 nm). Adding gallium to the semiconductor increases the energetic efficiency ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Model 4 - Thin-Film Solar PV Modules

    PV solar plants using First Solar’s advanced thin-film series 4 modules enjoy better energy yield, proven reliability and industry-leading durability.

    By First Solar, Inc. based in Tempe, ARIZONA (USA).

  • Model 4JET - Laser Edge Deletion of Thin Film Solar Cells

    Our systems for laser edge deletion of thinfilm solar panels offer numerous advantages over mechanical sandblasting or the use of grinding wheel technology.Touchless process without glass damage or micro cracks. Dry process without blasting grid or chemicals, less waste Volume, more environmentally friendly. Effective ablation of TCO, ...

    By 4JET Technologies GmbH based in GERMANY. from Photovoltaics Product line

  • thin film amorphous silicon - Model 4.5V 110mA 0.5W - Solar panels 4.5V 110mA 0.5W

    Solar panels 4.5V 110mA 0.5WHigh Voltage Miniature Solar Cell,for 4.5V batteries,can be used to top up charge on SLA Battery.Can be combined in series or parallel arrangements for increased voltage or current.Ideal for use with motors or other solar products.CELL TYPE: Crystalline SiliconCELL NUMBER: 9CellsOPERATING TEMP: -20℃ ~ +60℃DIMENSION: ...

  • BSC - Model a-Si Thin Film - Photovoltaic Module

    BSC a-Si Thin Film PV modules are designed to meet international standards, customer specifications, and environment-friendly.  conceming with project IRR(Interest Rate of Return). Investing in BSC solar module is a smart choice due to the fact that BSC solar module starts generating power from Sun Rise until Sun Set.  BSC modules are ...

    By BANGKOK SOLAR CO., LTD. based in Banpho, THAILAND.

  • thin film amorphous silicon solar panels - Model 3.5V 286mA 1W - Mini solar panels 3.5V 286mA 1W

    Mini solar panels 3.5V 286mA 1W High Efficiency Miniature Solar Cell,for use with 3V motors and other small load applications.Can be combined in series or parallel arrangements for increased voltage or current.Ideal for use with dc motors or other 3V loads.CELL TYPE: Crystalline SiliconCELL NUMBER: 7CellsOPERATING TEMP: -20℃ ~ +60℃DIMENSION: 60mm ...

  • Gadir Solar - Model a-SiR - Thin Film Photovoltaic Module

    The GADIR a-SiR solar module is manufactured with amorphous silicon using state-of-the art manufacturing techniques, which offer strong competitive advantages over other technologies.

    By Gadir Solar based in Madrid, SPAIN.

  • Gadir Solar - Model a-SiT - Thin Film Photovoltaic Module

    The GADIR a-SiT solar module is manufactured with amorphous silicon using state-of-the art manufacturing techniques, which offer strong competitive advantages over other technologies.

    By Gadir Solar based in Madrid, SPAIN.

  • Utility-Scale Solar Modules

    Sharp’s thin fi lm product pairs amorphous silicon with a layer of Sharp’s proprietary microcrystalline silicon to achieve higher stability and better performance than previously thought possible for thin film solar. This tandem-junction architecture captures more of the solar spectrum and converts more sunlight into electricity. It is ...

    By Sharp Solar Energy Solutions Group based in Huntington Beach, CALIFORNIA (USA). from Thin Film Products Product line

  • QS Solar - Single Glass 100W Amorphous Thin-Film Module

    40% lighter(only 15.25kg per module and 9.9kg/m2) than regular glass/glass thin film panels. Perfect for rooftop (esp.rooftop with weight restrictions)and BIPV/BAPV projects.The reinforced back structure offers the same resistance as regular modules. Delivers 100 Watts at standard test conditions.

    By QS Solar based in Shanghai, CHINA.

  • Silicon Thin-Film Cells

    Silicon thin-film solar cells are based on amorphous (a-Si) or microcrystalline silicon (μc-Si). These solar cells require semiconductor layers (absorbers) of a thickness up to 2 μm. The semiconductor layers are deposited at low process temperatures on large-area, low-cost materials, primarily glass, but also on metal strip or polymer films. ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • UniSolar EnerGen - Thin-film Photovoltaic Module

    A breakthrough in the roofing industry, the EnerGen™ system from CertainTeed features integrated UNI-SOLAR® thin-film photovoltaic laminates that seamlessly integrate with traditional asphalt roofing shingles and provide utility savings for homeowners. The lightweight and aesthetic design requires no rooftop penetrations, ...

    By United Solar Ovonic based in Rochester Hills, MICHIGAN (USA). from Residential Products Product line

  • Thin Film PV Module

    The thin film modules produced by Solarpro are of a thin film a-Si photovoltaic modules type.

    By Solarpro Holding based in Sofia, BULGARIA.

  • Thin Film Modules

    Moser Baer a-Si thin film modules are frameless Glass-PVB-Glass modules and are available in quarter, half and full size configurations offering a range of power outputs for different customer applications. These modules are ideal for large grid connected Photovoltaic Systems and provide excellent performance. Automated inspection and in-house ...

    By Moser Baer Solar Limited based in INDIA.

  • Thin Cover

    It is produced as 3-layered with a special formula for enhancing the efficiency of the solarization process. The most economic product for the solarisation process. Produced with high transparency. Its permeability of direct light is 95%. Film thickness is 20-25-30 microns. Maximum width of film is 8 meters.

    By Istanbul Sera Plastik San.Tic.A.Ş. based in Cadde Antalya, TURKEY. from Solarization Film Product line

  • Sera - Solarize Film

    It is produced as 3-layered with a special formula for enhancing the efficiency of the solarization process. The most economic product for the solarisation process. Produced with high transparency. Its permeability of direct light is 95%. Film thickness is 20-25-30 microns. Maximum width of film is 8 meters.

    By Istanbul Sera Plastik San.Tic.A.Ş. based in Cadde Antalya, TURKEY. from Solarization Film Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you