Only show results available in Virginia? Ok

Thin-Film Solar Cell equipment

  • Micromorph Thin-Film Solar Cells

    Micromorph thin-film solar cells combine both amorphous and microcrystalline silicon in one cell and belong to the group of the so-called multi-junction cells for which two (tandem cell) or more semiconductor layers are deposited alternately one above the other. As for micromorph silicon tandem cells, the absorption spectra of amorphous and ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CIS Thin-Film Solar Cells

    The basis of a CIS thin-film solar cell is a compound semiconductor based on copper, indium, selenium and/or sulfur – CuIn(Ga)(Se, S)2. The p‑conducting CIS layer of up to 3 μm thickness is combined with an n‑conducting CdS‑buffer layer (up to 50 nm). Adding gallium to the semiconductor increases the energetic efficiency ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CdTe Thin-Film Solar Cells

    CdTe thin-film solar cells are composed of a transparent conductive front contact layer,a thin n-conducting CdS-layer, a p-conducting CdTe absorber layer and a metallic back contact. The preferred substrate material is glass, just like with a-Si/µc-Si and CIGS thin-film cells. However, the use of metal strip and polymer films (PI) is also ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Model 4JET - Laser Edge Deletion of Thin Film Solar Cells

    Our systems for laser edge deletion of thinfilm solar panels offer numerous advantages over mechanical sandblasting or the use of grinding wheel technology.Touchless process without glass damage or micro cracks. Dry process without blasting grid or chemicals, less waste Volume, more environmentally friendly. Effective ablation of TCO, ...

    By 4JET Technologies GmbH based in GERMANY. from Photovoltaics Product line

  • Utility-Scale Solar Modules

    Sharp’s thin fi lm product pairs amorphous silicon with a layer of Sharp’s proprietary microcrystalline silicon to achieve higher stability and better performance than previously thought possible for thin film solar. This tandem-junction architecture captures more of the solar spectrum and converts more sunlight into electricity. It is ...

    By Sharp Solar Energy Solutions Group based in Huntington Beach, CALIFORNIA (USA). from Thin Film Products Product line

  • QS Solar - Single Glass 100W Amorphous Thin-Film Module

    40% lighter(only 15.25kg per module and 9.9kg/m2) than regular glass/glass thin film panels. Perfect for rooftop (esp.rooftop with weight restrictions)and BIPV/BAPV projects.The reinforced back structure offers the same resistance as regular modules. Delivers 100 Watts at standard test conditions.

    By QS Solar based in Shanghai, CHINA.

  • Silicon Thin-Film Cells

    Silicon thin-film solar cells are based on amorphous (a-Si) or microcrystalline silicon (μc-Si). These solar cells require semiconductor layers (absorbers) of a thickness up to 2 μm. The semiconductor layers are deposited at low process temperatures on large-area, low-cost materials, primarily glass, but also on metal strip or polymer films. ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Mono-crystalline Cell

    Imported cleaning equipment is used to keeping the appearance of the solar cell tidy and clean. And the advanced proliferation technology is adopted to ensure the conversion efficiency uniformity throughout cell; Advanced PECVD film forming technology is used to coat the cells with dark blue silicon nitride antireflection coatings with uniform ...

  • NovoVellum - Model FC03 - Crystalline Silicon and Thin Film Photovoltaic Modules

    The EVA series product line is formulated for all crystalline silicon and thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. It is the proven solution that is widely accepted as a standard encapsulating method in the PV industry. NovoVellum FC03 is a 32% VA ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • DMSOLAR - Model DM 77w CdTe - Solar Module

    Cadmium telluride (CdTe) photovoltaics describes a photovoltaic (PV) technology that is based on the use of cadmium telluride, a thin semiconductor layer designed to absorb and convert sunlight into electricity. CdTe PV is the only thin film technology with lower costs than conventional solar cells made of crystalline silicon in multi-kilowatt ...

    By Dmsolar, LLC based in Fort Lauderdale, FLORIDA (USA). from Solar Panels Product line

  • Model RS-018 - Poly Silicon Solar Cell

    Format 156mm×156mm±0.5mm Thickness 220µm±30µm,200µm±30µm. High efficiency in photovoltaic conversion16.3%-17.5%. Low inverse current, high shunt resistance and high dependability.Front side covered by dark blue silicon nitride anti-reflection film with good passivation, in homogenous color and ...

    By Jiangxi Risun Solar Energy Co., Ltd based in Xinyu, CHINA.

  • 156mmx156mm Multicrystalline Solar PV Cells

    Moser Baer multicrystalline solar cells are manufactured from highly purified polysilicon in a state-of-the-art manufacturing plant that permits use of thin silicon wafers. The wafers are handled through non-contact Bernoulli grippers and moved horizontally on conveyor belts and rollers through various process steps resulting in stress-free cell. ...

    By Moser Baer Solar Limited based in INDIA.

  • BIPV Solar Panels

    BIPV and BAPV are the future of solar projects. The solar panels become part of the roof. Roof sheet/ roofing sheet, Sheeting with integrated flexible solar panel, Lightweight solar panels Solar alu roof Easily-installed photovoltaic membrane roofing Watertight EPDM rubber sheet with high‐performance photovoltaic cells. Flexible a-Si ...

    By Solar Constructions based in Alsemberg, BELGIUM. from Solar Panels- Module Product line

  • Photovoltaic Cell

    The conversion of solar radiation into an electron current takes place in the photovoltaic cell, a device consisting of a thin sheet of semiconductor metal, very often made of suitably treated silicon.This treatment is characterised by various chemical processes including so-called 'doping'.Adding impurities, that is atoms of boron and ...

    By Enerpoint S.p.A. based in Nova Milanese (MB), ITALY.

  • Trosifol - Model R100 - Solar PVB Films

    If Trosifol Solar PVB films are to be used in a conventional module type or in a module type with a new cell technology, Trosifol's Technical Service should be contacted. For the crystalline solar cells most frequently produced and processed internationally, PVB films Trosifol Solar R40 and Trosifol Solar R100 transparent are used, and exclusively ...

    By Kuraray Europe GmbH - Division Trosifol based in Troisdorf, GERMANY. from Photovoltaics Product line

  • Solar Modules

    Solar modulesAre made up of solar cells that transform sunlight into electrical energy. transform light in to electrical energy. They are made up of individual solar cellsTransform sunlight into electrical energy. Irradiation causes the release of positive and negative charges which creates environmentally friendly energy. Over 80% of solar ...

    By IBC SOLAR AG based in Staffelstein, GERMANY.

  • Power Plant Solar Module

    It can also be called Off Grid solar module. For the users of off grid solar module, the main consideration is cost $/Wp and is not constrained by required space. The cumulated electricity generation of off grid solar cell is more important than module efficiency itself. Thin film solar module with cost advantage and low-light sensitivity is ...

    By Kenmos PV based in Tainan, CHINA.

  • Portable Solar Power Supplier

    For more info of this item please check our website: www.solarproductsworld.comNowadays, there is increasing demand for portable energy. It often happens that there is no grid electricity available not only when a mobile telephone, laptop GPS or mp3 needs to be charged but also for remote applications as the power for lighting, small ...

    By Newsolar International Ltd. based in Shenzhen, CHINA.

  • Model 258W - Solar Modules

    SBM Solar, Inc., founded 2002, is one of the first manufacturers of a UL certified, non-glass, non-EVA and crystalline PV solar module. The module’s multi-layered structure provides excellent environmental and chemical protection, better moisture resistance. The encapsulating package is the combination of a Fluoropolymer film provided by ...

    By SBM Solar, Inc. based in Concord, NORTH CAROLINA (USA).

  • Model ETS700 - Solar Stringer Machine

    The solar stringer machine ETS700 is a fully automatic machine for solder photovoltaic solar cells. This equipment is one of the first step in the production line and it’s one of the most important in the entire pv module production line. Ecoprogetti's innovative patented hybrid welder allows to solder without mechanical and ...

    By Ecoprogetti S.r.l. based in Carmignano di Brenta - PD, ITALY. from Tabber - Stringer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you