Refine by
Tower Vibration Sensor For Wind Turbines Equipment & Supplies
38 equipment items found
Manufactured by:DMT GmbH & Co. KG based inEssen, GERMANY
Wind turbines have to withstand powerful forces including oscillations and vibrations. Such vibrations have to be monitored reliably to prevent damage and expensive downtime. Tower vibration monitoring is also compulsory under applicable directives such as the GL2010. Precise information about the actual vibrations together with the requirements pertaining to natural frequency provide a solid ...
Manufactured by:Bergey Windpower Co. based inNorman, OKLAHOMA (USA)
Pro: Smallest footprint, no guy wires. Pro: Quick and easy install, with crane. Pro: Aesthetically Pleasing. Con: Higher costs. Available Heights: 18-37m (60-120ft). Compatibility: 15 kW & 10 kW ...
Manufactured by:Aeolos Wind Energy Ltd. based inLondon, UNITED KINGDOM
The Monopole Towers were widely used from our 1kW to 50kW wind turbines. Monopole tower has good appearance, reliable structure and easily to be installed. The survival wind speed is 50m/s. Aeolso engineers use the FEM (Finite Element Method) to check the tower strength and vibration. The design lift time is 20 years for a monopole ...
Manufactured by:Bergey Windpower Co. based inNorman, OKLAHOMA (USA)
Pro: Best value. Pro: Easy install with crane or gin pole. Pro: Least amount of concrete. Pro: Made in USA. Pro: Exemplary service record. Con: Large footprint. Available Heights: 18-49m (60-160ft).. Compatibility: 15 kW & 10 kW ...
Manufactured by:Bergey Windpower Co. based inNorman, OKLAHOMA (USA)
Pro: Best value.Pro: Easy install with crane or gin pole.Pro: Least amount of concrete.Pro: Made in USA.Pro: Exemplary service record.Con: Large footprint.Available Heights: 18-49m (60-160ft)..Compatibility: 5 kW & 10 kW ...
Manufactured by:Shanghai Nanhua Electronics Co., Ltd. based inShanghai, CHINA
Steady burning at night, combined with the advanced LED, optical and system control technology to meet the most demanding applications. Applicable to occasions where the wind turbine tower needs to be marked. Applicable to obstacles higher than 45 meters. Suitable for outdoor environments. Suitable for high salinity ...
Manufactured by:Bergey Windpower Co. based inNorman, OKLAHOMA (USA)
Pro: Lowers in hurrican or typhoon. Pro: Installs without crane. Pro: Made in USA. Con: Higher costs. Available Heights: 18-30m (60-100ft). Compatibility: 15 kW & 10 kW ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The rack & pinion Pegasus service lift from Avanti delivers a high level of safety for technicians working in wind turbines. It can be used during construction and commissioning of the wind turbine tower. The service lift may be used to transport two or three people plus their tools and equipment to work at the most convenient height on the tower. The Pegasus lift is guided by the ladder and ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The Avanti control panel with a special error display panel in the lift indicating errors or activated safety switches. The Avanti SWP service lift is delivered with the high-quality Avanti traction system which can be customised to specific customer need up to load capacity of 320 kg. The Avanti SWP is available in two sizes and capacities: L for 2 persons and 240 Kg load and XL for 3 persons ...
Manufactured by:Shanghai Fengling Renewables Co., Ltd. based inShanghai, CHINA
Shanghai Fengling Renewables presents the HH180 Hybrid Tower, a state-of-the-art concrete wind turbine tower reaching a remarkable height of 180 meters, with a substantial concrete section of 157.4 meters. This tall structure is specifically designed to optimize wind resource capture in challenging geographic locations, thus maximizing the efficiency of energy projects. The tower employs a ...
Manufactured by:Shanghai Nanhua Electronics Co., Ltd. based inShanghai, CHINA
LW46E is an auxiliary light which can be used harsh environment, like port machinery (STS crane, RTG crane, RMG crane), wind turbines (nacelle, tower, hub), vessel(ceiling, walkway). Producte has the features of waterproof, corrosion resistant and vibration ...
by:Nabrawind Technologies based inPamplona, SPAIN
Nabrawind Self Erecting Tower (Nabralift) is a new wind turbine tower technology that breaks all the barriers that are restraining the growth of the wind turbines hub height. Nabralift consists on a three-columns structure installed under the uppermost part of a WTG tubular tower and integrates a Self-Erection System (SES) that allows the installation of a full WTG (tower, nacelle, rotor) ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The Avanti Shark service lift is the most cost-effective wire guided service lift in the industry. The Avanti Shark service lift is approved according to the strictest European and American regulations. The Avanti Shark service lift can be customized to meet all customer demands. The Avanti Shark service lift has capacity for 2 persons - load capacity 240 Kg. The Avanti Shark service lift is ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
Cost effective wire guided lift suitable for offshore installations. Send/call control from platforms and travelling cable ensuring stability, efficiency and easy operation for technicians working in offshore wind turbine towers The Dolphin service lift is delivered with the high-quality Avanti traction system. Traction wire ropes inside the lift makes wire inspection safe and easy for the ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The ladder guided lift from Avanti Wind Systems ensures that the lift cabin does not sway when travelling. Smooth movements are ensured while travelling up the tower. The system uses the existing safety ladder system to guide its travel ...
Manufactured by:Aeolos Wind Energy Ltd. based inLondon, UNITED KINGDOM
Hydraulic lifting tower is very popular tower solution for small wind turbine system, especially for the not easy maintenance and typhoon area customers. After the first tower installation, it will do not need the crane or lifting equipment for the lay down and erecting process. The tower and turbine can be lay down by the hydraulic system within 5 or 15 minutes for the maintenance, repair or ...
Manufactured by:windcomp GmbH based inBerlin, GERMANY
The ROMEG M 20 G system is a sophisticated laser-based tool designed for dynamic measurements on wind turbines. It utilizes reflectorless laser distance measurements, enabling the detection of aerodynamically triggered imbalances and mass-induced imbalances while the turbine remains operational. This system features two high-performance lasers that are strategically aligned to scan rotor blades ...
Manufactured by:Dalian Tracy Slewing Bearing Manufacturing Co., Ltd based inWafangdian, CHINA
The wind power yaw ring is a critical component in wind turbine systems, designed to ensure turbine blades face the optimal direction for energy capture. This component features a large gear ring situated at the peak of the wind turbine tower, seamlessly interfacing with the turbine's main shaft. Equipped with advanced control systems and sensors, the yaw ring autonomously adjusts to wind ...
Manufactured by:Broadwind Energy, Inc. based inCicero, ILLINOIS (USA)
We are one of the largest producers of utility scale steel wind energy towers in North America. Wind towers are a growing source of renewable energy that provides clean, sustainable power in the U.S. Wind towers support a wind turbine and its other components, holding the nacelle, rotor, and blades of a wind turbine. The tower positions the turbine at an optimum height to achieve the highest ...
by:Aerones based inSan Jose, CALIFORNIA (USA)
Oil spillage is a typical problem for wind turbine operators however it has not only a visual effect on the wind turbine stem but also a large effect on the environment around it. The soil around the wind turbine is quickly contaminated in case of oil spillage and it is crucial to keep the soil free of ...