Only show results in Texas? Ok

turbine design modelling equipment

  • Premium

    iCenta - Model GFO - Turbine Gas Meter

    The operating principle of the Turbine Gas Meter is well known. It is based on the measurement of the gas velocity. The flowing gas is narrowed, accelerated and conditioned by the meter upstream straightening section. The dynamic forces of the fluid causes the turbine rotor to rotate. The turbine rotor is mounted onto an axial shaft with high ...

    By iCenta Controls Ltd based in Salisbury, UNITED KINGDOM. from Flow Meters - Gas Flow Meters Product line

  • Hi-Force - Model HVL - Single Acting Low Height Pancake Cylinders

    The HVL pancake cylinder range combines a very low closed height with a 6mm stroke, providing a precise adjusting and lifting force in very confined work areas. Ideally suited for applications requiring alignment of machinery, turbines, heavy structures etc. All models are single acting, load return design. The base of all HVL cylinders must be ...

    By Hi-Force Limited based in Northants, UNITED KINGDOM. from Cylinders Product line

  • Generators

    HTE Engineering and its manufacturing partners have been designing, manufacturing, and providing hydro generators worldwide for over 50 years.  Our engineering design team has the technology complete with turbine/generator modeling capabilities.  Our team’s experience enables us to supply generators that meet each project’s ...

    By HydroTech Engineering, LLC based in Sandy, UTAH (USA). from Other Products Product line

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • CHC - Small Francis Hydro Turbines

    Francis turbines have been around for 170 years, and have more installations than any other type of turbine in the world today. Numerous designs offering variations in runner height, crown and band diameters, number of buckets, etc make Francis turbines a versatile option for a wide range of hydro projects with heads as low as 12 meters to as high ...

    By Canadian Hydro Components Ltd. (CHC) based in Almonte, ONTARIO (CANADA).

  • MHPS - Model H-25 & H-50 & H-100 - Gas Turbines

    The H-25 Series gas turbines are based on a rugged, single-shaft, heavy-duty type frame gas turbine design that has been successfully applied since 1988 in the oil & gas, as well as the power generation industry. The H-25 fleet is highly reliable and mature, with over 5,000,000 actual fleet operating hours.

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA). from Gas Turbines Product line

  • Model 8402 - Gas Turbine Fuel Valve

    The 8402G Fuel Valve System is a balanced rotary valve with an electric stepper-motor actuator. This high performance gas turbine fuel control valve with fast operation speed and large turn down ratio is designed for reliable an efficient control of any gas turbine.

    By Amot based in Houston, TEXAS (USA). from Fuel Metering Valves Product line

  • SgurrControlBox - Turbine Control Design Toolbox

    Model, design and test wind and tidal turbine control systems. Build wind or tidal turbines control systems more efficiently with one of the industry's leading design and modelling software tools. The 'SgurrControlBox' control design toolbox is ideal for control and mechanical engineers. The SgurrControlBox embedded in the MATLAB numerical ...

    By SgurrControl based in Glasgow, UNITED KINGDOM.

  • Fishflow - Fish-friendly Turbine

    The fish-friendly low pressure water turbine of Pentair Fairbanks Nijhuis / FishFlow Innovations has been tested successfully on its fish-friendliness early August. For the performance of the test a scale model of the turbine (with a propeller diameter of 800 mm) was used and installed at the pumping station Leeghwater Buitenkaag* in the ...

    By FishFlow Innovations based in Medemblik, NETHERLANDS.

  • Steam Turbines

    Mitsubishi Hitachi Power Systems America – Energy and Environment, Ltd. has been a steam turbine supplier since 1933 and has since accumulated significant experience in the design of STG sets for both thermal and nuclear power plants.

    By Mitsubishi Hitachi Power Systems America , Ltd. based in Basking Ridge, NEW JERSEY (USA). from Power Generation Equipment Product line

  • Spica - Model SCS - Wind Turbine Controller

    By replacing your old wind turbine control system with the Spica SCS Retrofit Wind Turbine Controller in your ageing turbine, you can reduce downtime and optimise performance as troubleshooting becomes faster and more qualified. With the Spica SCS Retrofit Controller, wind turbine owners can replace their old control system with a new wind turbine ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you