turbine design modelling equipment in Europe

  • SgurrControlBox - Turbine Control Design Toolbox

    Model, design and test wind and tidal turbine control systems. Build wind or tidal turbines control systems more efficiently with one of the industry's leading design and modelling software tools. The 'SgurrControlBox' control design toolbox is ideal for control and mechanical engineers. The SgurrControlBox embedded in the MATLAB numerical ...

    By SgurrControl based in Glasgow, UNITED KINGDOM.

  • Turbine Silencers

    This type of silencer consists of a series of parallel baffles placed inside the smoke flue (exhaust or chimney) creating large contact areas that efficiently absorb low, medium and high frequency noises. The noise generated by turbine exhausts is significant (>130 dB) and therefore requires high-performance acoustic treatment. Each baffle is ...

    By Beirens SAS based in BUZANCAIS, FRANCE. from Acoustic Treatment Product line

  • Beirens - Double Wall Chimneys

    Double-Wall chimneys are metal industrial chimneys comprising a bearing structure (external wall) for stability and an internal heat insulated flue liner for evacuating fumes. Double-wall chimneys are designed for all types of boilers, electricity generators, turbines, furnaces and all fuel types: gas, heating oil, heavy fuel oil, wood, coal, ...

    By Beirens SAS based in BUZANCAIS, FRANCE. from Chimneys Product line

  • Siemens - Model SGT6-8000H - Gas Turbine

    The Siemens SGT6-8000H is absolute world class with a gross power output of 296 MW. The SGT6-8000H achieves efficiencies of more than 60 percent in combined cycle (CC) operation (SCC-8000H series), which makes it the most important component of the most efficient gas-fired power plants in the world. Environmental protection considerations as well ...

    By Siemens Power Generation based in Erlangen, GERMANY. from Gas Turbines Product line

  • Atlantis - Model AS Series - Ducted Horizontal Axis Turbines

    AS series turbines are ducted horizontal axis turbines suitable for deployment with mono-directional blades in river environments and bi-directional blades in diurnal tidal locations. AS turbines feature a swept back blade design and control system to optimise turbine efficiency across flow velocity distributions. The AS140, the first of the AS ...

    By SIMEC Atlantis Energy based in Victoria, UNITED KINGDOM.

  • Anakata - Retrofit Devices for Reduced Cost of energy

    Every rotor can be improved and very rarely is a turbine operating at its design limit. Anakata’s range of retrofit aerodynamic add-ons will be tailored to your turbine model to maximise energy capture and reduce noise. Our wide selection of devices means that you can customise site installation on a turbine-by-turbine basis.

    By Anakata Wind Power Resources Ltd Office in Novara, ITALY.

  • aeroMaster - Model 5.0 - Offshore Wind Turbine

    The systematic further development of the proven aeroMaster technology for offshore use, even more reliable, more efficient. The design of the aeroMaster 5.0 wind turbine typifies the know-how our engineers have accumulated from two successful development projects for 5 MW offshore wind turbines. This makes aerodyn the leading global player in the ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind turbines Product line

  • ADES - Pendular Wind Turbine - 60 kW - 335 kW

    The unique design of the ADES wind turbine includes three passive mechanical systems: a swivelling single-blade rotor, a pendulum power train and a selfsteering nacelle. The design compensates, accumulates and reinstates wind speed variations, preventing them from affecting the evenness of generator rotation and subsequently diminishing structural ...

  • Hydrokinetic Power Plant

    Hydrokinetic power plants are designed to be installed on rivers. The water current drives the turbines and the turbines produce electricity. Using such types of plant does not require the accumulation of water. The proposed model can give the power of 30 kWh. Power plants can be installed individually or in groups, thus increasing the power of ...

    By H.Cegielski - Poznań S.A. based in Poznań, POLAND. from Renewable Energy Systems Product line

  • Libellula - Model DC - Wind Turbine

    Libellula DC is a special version of the Libellula wind turbines, designed in order to be used in stand-alone systems, not connected to the electrical network (off-grid). Mechanical and aerodynamic characteristics are those of the standard on-grid models while the electrical control system is designed to be connected with an external battery bank. ...

    By Aria s.r.l based in Prato (PO), ITALY.

  • Suzlon - Model S82-1.5 MW - Wind Turbines

    With the introduction of new, high-yield next generation wind turbines, Suzlon has phased out its older WTG models viz. S88, S82, S66, and S52. We however, continue to support, operate and maintain all our installed wind turbines. The S82-1.5 MW is designed for generating optimal power output even at sites with a modest wind speed regime. S82-1.5 ...

    By Suzlon Energy Limited Office in Århus V, DENMARK. from Classic Fleet Product line

  • Suzlon - Model S52-600 kW - Wind Turbines

    With the introduction of new, high-yield next generation wind turbines, Suzlon has phased out its older WTG models viz. S88, S82, S66, and S52. We however, continue to support, operate and maintain all our installed wind turbines. The S52-600 kW is designed for generating the optimal power output even at sites with a modest wind speed regime. The ...

    By Suzlon Energy Limited Office in Århus V, DENMARK. from Classic Fleet Product line

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Suzlon - Model S66-1.25 MW - Wind Turbines

    With the introduction of new, high-yield next generation wind turbines, Suzlon has phased out its older WTG models viz. S88, S82, S66, and S52. We however, continue to support, operate and maintain all our installed wind turbines. The S66-1.25 MW is designed for generating the optimal power output even at sites with a modest wind speed regime. ...

    By Suzlon Energy Limited Office in Århus V, DENMARK. from Classic Fleet Product line

  • Kaplan Hydro Turbine

    The axial turbines are designed for projects with low and very low heads with a strong flow variation. VAPTECH offers mainly the classic vertical shaft Kaplan turbine with 3 to 6 runner blades and with double regulation. For runner diameters up to 1400 mm we use a steel spiral casing and for bigger runner diameters we recommend a concrete spiral ...

    By VAPTECH Ltd based in Sofia, BULGARIA. from Hydro Product line

  • Gilkes - Francis Hydro Turbines

    Gilkes Francis Turbines are available as either horizontal or vertical units. The water enters the spiral, or scroll case, and is directed by a series of moveable guide vanes, or wicket gates, to the turbine runner. As the water passes through the runner it rotates and the water pressure drops. Water is then discharged through a draft tube into ...

    By Gilbert Gilkes & Gordon Ltd based in Kendal, UNITED KINGDOM. from Hydropower Product line

  • Connection Couplings, Hydraulically Set and Reset

    Voith connection couplings transmit torque, backlash-free in a friction joint. They transfer the most torque in relation to size, which adds high performance and allows for more effective dimensioning of the driveline. Setting and releasing occurs hydraulically, which enables fast installation, service and maintenance. All models can be customized ...

    By Voith GmbH based in Heidenheim, GERMANY. from Wind Turbines Product line

  • WKV - Turgo Hydro Turbine

    Low equipment cost because of high specific speed, Robust and durable construction, High efficiencies guarantied and optimized by model testing, Injector needle made of high grade chrome steel alloy, Runner cast from high grade, extremely wear-resistant steel or stainless steel, Maintenance-free shaft-seal design, Bearings rated for more than 100 ...

    By Wasserkraft Volk AG based in Gutach, GERMANY. from Turbines and Power Plants Product line

  • Hi-Force - Model HVL - Single Acting Low Height Pancake Cylinders

    The HVL pancake cylinder range combines a very low closed height with a 6mm stroke, providing a precise adjusting and lifting force in very confined work areas. Ideally suited for applications requiring alignment of machinery, turbines, heavy structures etc. All models are single acting, load return design. The base of all HVL cylinders must be ...

    By Hi-Force Limited based in Northants, UNITED KINGDOM. from Cylinders Product line

  • CRISTEC - Model RCE - Electronic Battery Isolators

    The RCE MOSFET electronic battery isolators are some electronic devices designed to direct the charging current to several batteries while preventing current from flowing from one battery to another. The DC input power source may be an alternator, a charger, a wind turbine, a solar panel, a hydrogenator, etc. The load distributors have a ...

    By CRISTEC based in Quimper, FRANCE. from Electronic Battery Isolators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you