Utility Flare Equipment
-
Manufactured by Encore Combustionbased in USA
Most common flare design. Include flame retention device(s) to maintain stable combustion. Used when waste vapor is inherently smokeless or for emergency relief scenarios. No assist method or utility requirement. To reduce purge gas usage, a purge seal is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility ...
-
Manufactured by Parnel Biogas, Inc.based in USA
The solution to landfill gas control begins with the selection of a company that specializes in just that! At Parnel Biogas Inc. we are dedicated to providing you with a quality product and prompt response/service from sales thru fabrication, installation, start-up and ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of ...
-
Manufactured by Combustion Research Associatesbased in INDIA
Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. Our highly engineered Elevated Utility flares are designed to withstand extreme ...
-
Manufactured by Europem N.Vbased in BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable ...
-
Manufactured by Hero Flare LLCbased in USA
Utility Aares are the most economical Aare solution for those applications that do not require smokeless capacity, or for those applications where the waste gas will burn smokeless without the need for smokeless Aare technology Utility Aare technology is commonly used for emergency release cases as a back-up in the event an upset condition ...
-
Manufactured by MRW Technologies, Inc.based in USA
Whether your application has low pressure or high pressure, combustible or non-combustible gas, small or large flow, MRW can offer a solution. Our systems have proven successful worldwide in industries ranging from: Gas Processing, Oil & Gas Production, Midstream, Chemical & Petrochemical, Landfill, Petroleum Refining, Biogas/Biofuels, Steel & ...
-
Manufactured by Encore Combustionbased in USA
Pre-engineered flare systems to reduce cost and improve delivery. Multiple flare sizes to suit the customer’s application. EPA OOOOa compliant. 40 CFR 60.18 compliant. 98%+ VOC destruction efficiency. Elevated flare with visible ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
Designed for compressor blow down, emergency pressure release and flows that do not contain any liquid content. This design works well in situations where space on the site is limited. Equip them with any ignition option. (Underground or above ground knockouts can be placed in front of ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
Designed for gas well locations where high volumes of gas are blown down for maintenance reasons. The large integral base knockout ensures that condensates flowing from the well are contained in the knockout and not sprayed around causing a dangerous condition. These can be guy wire or self-supporting depending on available space and ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
Designed for small oil batteries and processes that do not generate water condensate. They do require a larger foot print area due to the guy wire support system and they can be equipped with any Prism ignition ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
Designed for compressor blow down, emergency pressure release and flows that contain any liquid content. Can be built as self support or guy wire support, based on available space on site, and they can be equipped with any ignition ...
-
Manufactured by Product Recovery Management, Inc.(PRM)based in USA
PRM Flare Systems are used for controlling Methane (CH4) and Carbon Dioxide (CO2), as by-products of Landfill Bio-degradation. PRM specializes in designing and manufacturing flares for landfill applications up to 10000 SCFM with destruction rates of up to 98% efficiency. Other markets include waste-water and agricultural ...
-
Manufactured by Hero Flare LLCbased in USA
HERO Flare is a leading supplier for providing proven Air Assist technology to achieve smokeless capacities. Low pressure air is an excellent method for smoke free combustion of heavier gas streams. The flare gas and blower air flow coaxially to the flare tip where they mix. The blower air provides a significant portion of the stoichiometric ...
-
Manufactured by Hero Flare LLCbased in USA
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
-
Manufactured by Hero Flare LLCbased in USA
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Safety and reliability are crucial for offshore applications. ITAS offshore flares are robust, proven, long-lasting and safe. Designed to comply with the most stringent quality standards, ITAS offshore flares range from simple low-pressure utility flares to the sophisticated “swing-out” liquid burner systems. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you