Refine by
Voltage Data Logger Equipment & Supplies
18 equipment items found
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The DCV-2 is an 8-channel, battery powered, stand alone voltage data logger. The logger records up to 2 million readings of data and stores it in non-volatile flash memory for later retrieval. Input voltage signals can be from sensors, transducers, transmitters or any other common ...
Manufactured by:Beanair GmbH based inBerlin, GERMANY
The BeanDevice® AN-mV Xtender is a wireless data logger with analog voltage inputs (±20mV). Special care is taken in the analog signal conditioner design with an accuracy of ±0.4% (FS) and a dynamic range of 16-bits. The BeanDevice® AN-mV Xtender comes with an integrated data Logger that can store up to 1 000 ...
Manufactured by:PCE Instruments India Private Ltd. based inNew Panvel East, INDIA
For Simulation and Measurement of Current and Voltage / Li-Ion battery / Continuity tester / Ramp function / Data logger. The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage ...
Manufactured by:Scanntronik Mugrauer GmbH based inZorneding, GERMANY
Convenient Recording, Monitoring and Analysis of All Types of Current and Voltage Signals. Fast and flexible 12-bit-A/D analysis of current and voltage for everyone ! The Voltfox Maxi opens up a new dimension in the monitoring of current and voltage signals. In its compact housing, the Voltfox Maxi combines a high-resolution 12-bit A/D converter, ...
Manufactured by:HT Italia S.r.L. based inFaenza (RA), ITALY
TRMS three-phase voltage data logger; XL424 is a Data Logger capable of measuring and recording the true root mean square(TRMS) value of AC voltage up to 600V in three-phase 3-wire electric systems for different applications (evaluation of mains voltage, load unbalance, etc.). ...
Premium
Manufactured by:Monarch Instrument based inAmherst, NEW HAMPSHIRE (USA)
The Track-It™ DC Voltage and Current Data Logger is a two-channel battery-powered standalone compact data logger that records up to 32,000 samples each of dc voltage or current data. Units are available in four DC voltage ranges and one for dc current. ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The EC-2V is a two-channel voltage data logger that needs to be plugged in to the mains socket you want to measure. Setup the Logger using the Electrosoft software, then plug it ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The EC-3V AC Voltage Data Logger allows engineers to quickly and cost-effectively monitor and resolve single & 3-phase voltage problems. It has an integral Phase Sequence/Rotation Checker. The voltage levels are stored with dates and times. With the back-up battery, the Electrocorder data ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The EC-3V is a three-phase voltage data logger that can record 1, 2 or 3 phases. Simply connect to your supply. Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you're going to ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
This single phase data logger is specifically designed to monitor one voltage channel and one current. It allows you to monitor the main voltage supply and the load current, enabling staff to determine whether a voltage problem is load related or not. The Electrocorder range is designed to allow electrical ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The DC-3VA is a three-channel DC voltage and current data logger. It records two channels of DC voltage (300Vdc) and one channel of DC current. Setup the Logger using the Electrosoft software, then fit it to the supply/equipment that you're going to ...
Manufactured by:Resol GmbH based inHattingen, GERMANY
Be it solar thermal, heating or DHW heat exchange controllers – with the RESOL DL3 you can easily and conveniently log system data of up to 6 controllers. Get a comprehensive overview of all controllers connected with the large full graphic display. Transfer data with an SD memory card or a USB memory stick, or use the LAN interface to view and process data on your ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The DC-3VA DC Voltage Current Data Logger is a two-channel data logger specifically designed to accurately monitor one or two DC voltage channels, 1V to 300Vdc and one DC current channel, allowing you to monitor PV (photovoltaic) cell output, DC charger performance, as well as many other ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The EC-2VA is a single-phase voltage and current data logger that uses a flexible Rogowski coil and plug to connect to the mains supply/equipment you wish to measure. Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you're going to ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 03301, manufacted by R. M. Young, is the wind vane included with our Wind Sentry Sets (03002, 03001). Although some customers have valid applications that require monitoring wind speed only (without direction), monitoring wind direction only (without wind speed) provides little useful information. For this reason, the 03301 is available for two purposes: As a replacement vane for a Wind ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The CT-1A is a single-phase current data logger that needs its CT connected to your incoming supply. Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point that you're going to ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 03002, manufactured by R. M. Young, measures wind speed and direction with a three-cup anemometer and a wind vane mounted on a small crossarm. It interfaces directly with your Campbell Scientific data loggers, so no signal conditioning is ...
Manufactured by:Acksen Ltd. based inJordanstown, UNITED KINGDOM
The EC-7VAR-RS is a three-phase voltage and current data logger that uses three flexible Rogowski coils and 4 Voltage leads (L1, L2, L3 and Neutral) to connect to your supply. Setup the Logger using the Electrosoft software, then fit it to the distribution board or other point on the system that you want to ...