Waste Gas Equipment
-
Manufactured by Geohellas S.A.based in GREECE
Geohellas offers custom solutions to those industries whose processes include steps of purification of gas effluents prior to the release to the Environment. Applications include: desulfurization of gases, fly ash purification, decomposition of NOx gases, industrial food air filters and many ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...
-
Manufactured by Standardkessel Baumgarte GmbHbased in GERMANY
Condensation is a proven method of recovering pollutants or solvents in the waste gas as resources and for hence saving raw materials, energy and costs. Standardkessel Baumgarte possesses the necessary know-how for developing an optimum concept speciallly orientated to your requirements, for emission reduction, recovery and waste ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Cs Clean Systems AGbased in GERMANY
FABLINE is the standard CLEANSORB model for waste gas removal on factory-scale applications. Available in three column sizes, the system is readily adaptable to the requirements of both pilot line and full-scale manufacturing. Enabled by the built-in safety and efficiency of CS CLEAN SOLUTIONS proprietary CLEANSORB® media, and with ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 244E Enclosed Burner Systems are designed to burn biogas efficiently and safely over a wide range of operating parameters. With no visible flame, the 244E systems use an innovative stack design to naturally induce the proper amount of combustion air which guarantees high destruction removal ...
-
Manufactured by Flare and Vapor Systems Corpbased in USA
FAV Systems. has developed the FAV-WG-TDU. This unit is a vertically fired, no visible flame, ceramic lined combustion chamber with a multi-tipped burner arrangement. This unique burner design and configuration produces an efficient and very quiet burning combustion flame. We can achieve these features by utilizing a ceramic coated burner, velocity breaker and combustion zone stabilizer combined ...
-
Manufactured by Eksas Metal Plating Plants Ind. Trading Incbased in TURKEY
service aspirators are achieved by directly connecting to SCHENCK Germany via internet and the result certificate is obtained. In addition, the collected gases are washed in gas washing units in order to prevent damage to the environment. Our company manufactures both vertical and horizontal type gas washing systems in accordance with the ...
-
Manufactured by Sedation Systems LLCbased in USA
Using a nitrous scavenger to minimize exhaled nitrous is highly recommended by the CDC, NIOSH, and OSHA. It immensely increases the safety of performing procedures in an office setting while administering nitrous, and Sedation Systems LLC is proud to offer the only FDA-cleared scavenging unit available. ...
-
Manufactured by Harbauer GmbHbased in GERMANY
Waste gas catalytic processing makes it possible to clean up contaminated areas which formerly used to be left polluted or whose cleanup proved to be too costly. Where the soil is contaminated with vinyl chloride, catalytic combustion plants are the only way to remove the pollutants. As a first step, the raw gas is preheated in a recuperator ...
-
Manufactured by Transvac Systems Ltdbased in UNITED KINGDOM
Transvac Ejectors now have the capability of achieving very high discharge pressures and can compress gas from 0 to 2150 psig in a single stage. This means Ejectors can now entrain low-pressure gas (such as CO2 or flare gas) and discharge the multi-phase flow into an underground formation, similar to the SWAG process (simultaneous water and ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
the operator to high temperatures. The design of the pilot system is such that the 244W is not affected by fluctuations in waste gas flow or heat content. A shielded thermocouple provides reliable detection of the ...
-
Manufactured by Jiangsu AngKua Environmental Protection Technology Co., Ltd.based in CHINA
Air pollution (including all kinds of waste gas, all kinds of dust) control engineering, equipment planning, design, manufacture, installation, ...
-
Manufactured by Oschatz Power GmbHbased in GERMANY
An example for the Direct-reduction process systems is the Hlsarna process, which was developed as part of the ULCOS project (Ultra-Low Carbon Dioxide [CO2] Steelmaking). This has the goal of halving the carbon dioxide emissions in steel production. Oschatz built waste gas cooling sections in connection with the HIsmelt process for the first ...
-
based in GERMANY
Waste gas dechlorination units are responsible for absorbing all by-product chlorine gas streams from the electrolysis plant and converting them in sodium hypochlorite, thus avoiding any gaseous leakage to the atmosphere. They are also used as a safety unit to remove all chlorine from the electrolysis plant during shut down ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 239A Series Waste Gas Burner is designed for burning biogas generated in the anaerobic digestion process. Burning or flaring to the atmosphere reduces the potential odor nuisance from venting directly to the atmosphere. This burner is suitable for burning low volumes of biogas, which is typically very 'wet', with a low BTU value ...
-
Manufactured by Aktek Technology Engineering Co. Ltdbased in TURKEY
The AKTEK Model 8391B Waste Gas Burner includes an ignition system with all of the best features available in a waste gas burner. The burner wind shield contains the unique 'downdraft prevention' with a bevel design which virtually eliminates the possibility of the flame being blown out. The design also provides the proper ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Supera Anesthesiabased in USA
Keep your facility waste gas-free, and keep yourself, your staff, and your animal subjects safe with this completely OSHA-compliant unit. Even better, the EVC3100 removes waste gas and handles liquid aspiration in a single convenient, compact machine. Manufactured with the highest quality American-made pump, the EVC3100 is built ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you