Waste Gas Stream Equipment In Canada
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An FKO (fluid knockout) is a low-pressure separator used on a vent line to remove liquids from a waste gas stream prior to being flared or incinerated. This can prevent water from freezing in the flare stack riser or liquid carryover from being sprayed over immediate area (burning rain). Alberta – All combustion systems in Alberta ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97310T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97310T Enclosed Burner removes harmful emissions from waste gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON Starfire burner tip. Upon mixing at the flare tip, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These flares generally dispose of heavier waste gases and/or gases with low supply pressures, which have a greater tendency to ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive ...
-
Manufactured by Infratech Corporationbased in CANADA
Infratech gas waste incinerators and thermal oxidizers are designed to meet applicable emission and ground level concentration regulations. Our designs ensure a predictable Destruction Efficiency and substantially reduced auxiliary fuel consumption requirements. Our continuous duty gaseous waste incinerators/oxidizers are designed to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you