Waste Gas Stream Equipment In USA
-
based in AUSTRIA
The VOXsorbTherm system has been developed especially for lean VOC concentration (less than 200 mgVOC/Nm³) and periodically occurring waste gas streams. The system is regenerated in place by an accompanying oxidation ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An FKO (fluid knockout) is a low-pressure separator used on a vent line to remove liquids from a waste gas stream prior to being flared or incinerated. This can prevent water from freezing in the flare stack riser or liquid carryover from being sprayed over immediate area (burning rain). Alberta – All combustion systems in Alberta ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent ...
-
Manufactured by MRW Technologies, Inc.based in USA
Gas-assisted flares mix fuel gas with the waste gas for applications requiring smokeless operation. Our flare tips can be engineered to mix this fuel gas with both high and low-pressure waste gas streams. MRW can supply these gas-assist flares at ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97310T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97310T Enclosed Burner removes harmful emissions from waste gas ...
-
Manufactured by Vaprox LLCbased in USA
in 12vdc and 120vac and come standard with an interchangeable ventilated (smokeless) stainless steel flare tip. Vaprox flares are designed to control liquids found in the waste gas stream with a scrubber pot located at the base complete with liquid sight glass, level switch and liquid evacuation pump (pneumatic diaphragm or electric). ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste ...
-
Manufactured by Vaprox LLCbased in USA
the need for a second flare on your tank battery facility, thus reducing construction costs. All Vaprox systems are available in 12vdc and 120vac and come standard with an interchangeable ventilated (smokeless) stainless steel flare tip. Vaprox flares are designed to control liquids found in the waste gas stream with a scrubber pot located at ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON Starfire burner tip. Upon mixing at the flare tip, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These flares generally dispose of heavier waste gases and/or gases with low supply pressures, which have a greater tendency to ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Complete systems and retrofits available. 99.99+% DRE: Achieve field verified and class leading destruction efficiency with guarantees up to 99.99% DRE. Eliminates VOC's: Significantly reduce hydrocarbon slip and reduce the emissions footprint of your ...
-
Manufactured by Power and Energy, Inc.based in USA
Power+Energy Hydrogen Separators produce ultra-high purity hydrogen from hydrogen rich gas streams for Fuel Cells. Each H2 separator may be custom designed to match the specific conditions of the customer’s application. Power+Energy manufactures H2 separators ranging in hydrogen output from 0.5 slpm, capable of feeding a 50W fuel cell, ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare ...
-
Manufactured by Catalytic Products International (CPI)based in USA
Catalytic Products International is continuing our 43-year history of providing innovative air pollution control solutions with a line of highly flexible, economical EPA qualified, vaporcombustion systems. CPI’s Thermal Combustor Systems (TCS) routinely exceed all worldwide regulatory requirements while providing a level of sophistication that is unmatched in our industry. In today’s ...
-
Distributed by Klaus Equipment Company (KEC)based in USA
RENTECH boilers are custom designed for each unique application. If your project requires a boiler, heat recovery steam generator, wasteheat boiler, fired packaged watertube boiler or other specialty boiler, you can depend on RENTECH to deliver a complete engineered ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you