Wind Inverter Equipment
-
Manufactured by E- Novasolarbased in ITALY
The great versatility of the new serie universal controller GRID-TIE will allow you great flexibility in use and at the same time an extreme easy-connection: three jack connectors go directly linked to the three phases of your wind turbine and two supplementary connectors are designed for protection against discharge voltage and the ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The feed-in converter smart!wind was designed by SPE especially for small wind turbines (SWT) with a power range from 5.5 to 20 kW. Besides the control functions for a SWT the smart!wind provides several protective functions supporting a safe operation of your SWT. Small hydro plants as well as CHP’s offer additional possible ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The PVI-3.0/3.6/4.2-TL-W wind turbine inverter is designed with ABB’s proven high performance technology. This dual stage transformerless wind inverter offers a unique combination of high efficiency, installer-friendly design and very wide input voltage range ensuring high energy harvesting. The high speed and precise power ...
-
Manufactured by Shandong BOS Energy Technology Co., Ltdbased in CHINA
Wind off-grid power system consists of the wind turbine, controller, battery, wind off grid inverter and distribution system.Wind generate AC power through the wind turbine generator driven by the wind, and then converted to be DC power. The wind turbine off grid ...
-
Manufactured by Jinan Xinyuhua Energy Technology Co., Ltd.based in CHINA
Power Point Tracking(MPPT). Inverter and network current closed-loop control, adjustable control. Wide AC voltage input range, meet the needs of different occasions. Perfect protection and complete self-detection and protection. When the system has malfunction, It will stop the on grid inverting. Close circuit structure, the maximum efficiency> ...
-
Manufactured by Gaotune Technologies Co.,Ltd.based in CHINA
Application: High-power (especial more than 50KW) reactors of solar or wind ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos-H 1kw wind turbine is a simple, easy installation and reliable wind generator with tail. The first installation was made in 1986 in Denmark as the off grid application for home power supply. The output can be DC 48v for battery charging or DC 110v for grid tie application with SMA Wind Boy 1100 inverter. As a residential ...
-
based in CANADA
Vmaxtanks VMAXSLR125 AGM 12V 125Ah SLA Rechargeable Deep Cycle Battery for Use with Pv Solar Panels Smart chargers, Wind Turbines and Inverters and Backup Power (12 Volt 125Ah Group 31 AGM). 2 Volt 125Ah Group 31 AGM Deep Cycle Heavy Duty Battery. Military grade custom made plates. Float service life span of 8 to 10 years. Designed for ...
-
Manufactured by Waaree Groupbased in INDIA
Our off-grid inverters, also known as stand-alone inverters, are the ones that needn't be hooked up to a solar panel. Instead, they draw the required DC power from batteries charged using PV arrays or other resources like engine generators, hydro turbines and wind turbines. Since these inverters are isolated from their ...
-
Manufactured by Celec Enterprisesbased in INDIA
savings at low and at peak energy demand levels. Can be used in conjunction with renewable energy sources like Solar Panel, Wind Turbine and Inverters etc. Unique Features Digital Display of Power Saving Power Monitoring of All Electrical Parameters Easy Installation, Pluggable Current Sensors Power logger attachment against order How It ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.5 m/sec. we use a repeller with 4.0 m ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.0 m/sec. we use a repeller with 5.8 m ...
-
Manufactured by Kesheng Electronic Co., Ltd.based in CHINA
Equivalent series resistance is small and can withstand large ripple current. Small inductance, low temperature rise, long life. Dry structure, solid epoxy filling. Metal aluminum case (with mounting screw), easy to install. Used in DC filter circuit, which can replace electrolytic ...
-
Manufactured by Semikron Danfossbased in GERMANY
The New High-Power Standard in Traction, Renewables and Drives SEMITRANS 20 represents the next generation standard power module for high-power applications. The SEMITRANS 20 product family features two different Versions: SEMITRANS 20 TRACTION: rolling stock reliability and SEMITRANS 20 INDUSTRIAL: optimised for wind, solar and drive ...
-
Manufactured by Hadda International Group (HIG)based in BELGIUM
Sustainable wind energy is capturing ongoing attention and is in development worldwide. Knowledge about this renewable energy source is now more important than ever. In addition, climate change makes it imperative for us to take sustainable measures. The use of this renewable energy source is still limited today, but it will significantly ...
-
Manufactured by Amgis, LLCbased in USA
Inductors are one of the most important components in electronics. Commonly used to store energy, they can also be used as RF chokes (see below). As current passes through an inductor, it creates a magnetic field around the coil. The strength of this magnetic field represents the stored energy. The measure of an inductor’s ability to store energy is called inductance, measured in Henries ...
-
Manufactured by KLiUX Energies International Inc. (KLiUX)based in USA
It consists of a rotor, a tower and a generator. The rotor: maximum energy production, noise absence, birds friendly. The proprietary designed rotor is comprised of nine blades. Our “alfa” blade profile and the 9 blade rotor configuration is designed to allow maximum wind harnessing and to optimized wind aerodynamics ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
NdFeBo permanent magnets – these are the strongest permanent magnets currently available. No cogging torque, maintenance-free!. To ensure long, maintenance-free service of the generators in the ANTARIS wind turbine, the copper winding in the stator is configured to meet insulation class H (180° C). As the repeller is attached ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you