Wind Site Equipment In Europe
-
Manufactured by Gamesa Electricbased in SPAIN
The SG 2.1-114 is the benchmark for medium and low wind sites thanks to its low power density, which allows maximum profitability. A strong market presence bears testament to this, with over 4,300 MW installed ...
-
Manufactured by Baltic WindWerke GmbH & Co. KGbased in GERMANY
The 2.0 megawatt wind turbine is designed for high yields, but can also be adapted to low-wind sites (IEC 3). Large rotors with a diameter of 93 and 100 m ensure high yields. As a cold-climate version (CCV) and hot-climate version (HCV), the FW 2000 is also suitable for sites with extreme climatic conditions. ...
-
based in FRANCE
greatly reduces the relative magnitude of load peaks on the structure and the tether when compared to traditional airfoils. Our systems are thus well suited for turbulent wind sites. ...
-
Manufactured by Leitwind SPAbased in ITALY
The LTW90 wind turbine was specially designed for low-wind sites. Thanks to the large rotor surface area, it ensures significant power generation and is perfectly suitable for a wind class of up to ...
-
Manufactured by Vestas Wind Systems A/Sbased in DENMARK
The V100-2.0 MW® IEC IIB turbine allows you to increase productivity by opening up low- and medium-wind sites which were previously regarded as ...
-
Manufactured by Vestas Wind Systems A/Sbased in DENMARK
The V150-4.5 MW™ is designed for low wind sites, and is one of the industry’s highest producing onshore low wind ...
-
by SeaRoc Groupbased in UNITED KINGDOM
The SeaPlanner marine package includes AIS vessel tracking and wind farm site assets overlaid on top of an Admiralty chart derived from UKHO SeaZone data. Functionality includes: Wind farm asset and chart data layers, Vessel tracking, Personnel tracking, Vessel playback/ audit, Vessel guard zones, Survey data ...
-
Manufactured by Windflow Technology Ltdbased in NEW ZEALAND
The 45-500 is Windflow's newest turbine. With a rated power of 500 kilowatts (kW) and a rotor diameter of 45 meters, it is a turbine that can make your project on a medium to low wind site a financial success. The 45-500 is designed to the same international standard as our flagship turbine. The 45-500 has Windflow's characteristic ...
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its ...
-
Manufactured by Vestas Wind Systems A/Sbased in DENMARK
The V162-6.2 MW™ is designed for low to medium wind sites and has extensive application in high wind ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
Suzlon’s new S120 wind turbine generator, built on the highly successful 2.1 MW platform is set to improve the ROI for customers and a new benchmark in the wind industry. Wider rotor diameter of 120 metres with swept area of 11,225 sq. meters. Suitable for low wind sites IEC Class S. Next-generation controls with ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The Suzlon S97-2.1 MW series is an award-winning wind turbine generator range which was specially designed to make low wind speed sites profitable. It was available in two variants: S97-90m - All steel tubular tower that reaches a height of 90m. S97-120m - All steel tower that combines the lattice and tubular structure with a unique ...
-
Manufactured by Yandalux GmbHbased in GERMANY
Every PV module must be securely attached, no matter if it is mounted on a roof or installed on the ground. Mounting material should preferably be made of aluminium or galvanized steel with stainless steel fasteners and must be highly durable. Racks must withstand high wind loads. Assembly on site should be easy to keep installation ...
-
Manufactured by Siemens Gamesa Renewable Energybased in SPAIN
reliability and suitability for all kinds of sites and wind conditions, from the most challenging locations to low and medium wind speed sites. Thanks to this performance, the platform's installed capacity stands at over 17,400 MW worldwide, while average fleet availability is running at over ...
-
Manufactured by Windflow Technology Ltdbased in NEW ZEALAND
The 33-500 is Windflow's flagship turbine. With a rated power of 500 kilowatts (kW) and a rotor diameter of 33 meters, it is a turbine that can make your project on a high to medium wind site a financial success. There are more than one hundred 33-500 turbines in the world, and collectively they have accumulated over 600 ...
-
Manufactured by Siemens Gamesa Renewable Energybased in SPAIN
reliability and suitability for all kinds of sites and wind conditions, from the most challenging locations to low and medium wind speed sites. Thanks to this performance, the platform's installed capacity stands at over 18,600 MW worldwide, while average fleet availability is running at over ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Manufactured by Nordex SEbased in GERMANY
As an all-round turbine in the 2.5 MW product line, the N90/2500 can be deployed at strong-wind sites. With different tower heights, it covers wind class IEC 1. Nordex also offers it with the option of a frequency of 50 or 60 hertz. This makes the N90/2500 a very versatile 2.5 MW turbine and the classic in the series. Hundreds are in ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
With a 54-metre rotor and a range of tower heights, the DIRECTWIND 54 is the ideal choice for distributed energy generation in low wind (IEC class IIIA) sites where planning permission and tip-height restrictions apply. Thanks to EWT’s continuous market-driven innovation, the DW54 delivers higher yields than similar-sized ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you