Wind Site Equipment In USA
-
based in USA
for the best-in-class reliability, site suitability and efficient grid interconnection. The 121-meter rotor is designed to maximize annual energy production at low wind sites. ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Manufactured by Aeronautica Windpower, LLCbased in USA
When King-Sized Turbines Are Just Too Large: In an age of King-sized wind turbines designed for wide open spaces, Aeronautica Windpower is proud to introduce the 750 Series: Three-Quarter megawatt, 'Queen-size' machines designed for 'distributed wind' applications. Many good wind sites just cannot accommodate huge, utility-scale ...
-
Manufactured by Carter Wind Energybased in USA
The Model 500 is an efficient and powerful turbine specifically designed and optimized for low to medium wind sites, without comprising the robust design features required for installation in the most harsh tropical and artic conditions. It is based on the proven and reliable Model 300 turbine, and retains the easy shipping, ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
With a 54-metre rotor and a range of tower heights, the DIRECTWIND 54 is the ideal choice for distributed energy generation in low wind (IEC class IIIA) sites where planning permission and tip-height restrictions apply. Thanks to EWT’s continuous market-driven innovation, the DW54 delivers higher yields than similar-sized ...
-
Manufactured by Royall Power, by Royall Products, LLCbased in USA
More Power Output at Lower Speeds: This wind turbine is built to last, and comes with a 5 year warranty. Wind turbines can be configured to match any site or wind condition. With our blade design and configuration, we can supply you with the proper wind turbine for your particular project. This ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
With its 61-metre rotor and advanced control features, the DIRECTWIND 61 maximizes your energy output from low-wind (class IIIA) sites. This pitch-controlled, variable-speed wind turbine is optimized for distributed energy generation. Thanks to EWT’s continuous market-driven innovation, it combines high yields with outstanding ...
-
Manufactured by Carter Wind Energybased in USA
The Model 300 turbine is one of the most versatile and modern turbines designs on the market today having proven itself reliable in harsh tropical and artic conditions. Suitable for high and medium wind speed sites, the turbine is compact and portable, with easy shipping. The complete turbine assembly is shipped quickly in a standard ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
Maximize your annual energy output when (re)powering medium wind distributed energy sites; The DIRECTWIND 58 is the result of EWT commitment to continuous innovation and improvement. This 58-metre pitch-controlled, variable speed wind turbine is designed to deliver higher annual energy outputs in medium wind speed (class IIA) ...
-
Manufactured by Royall Power, by Royall Products, LLCbased in USA
Designed for commercial wind turbine installations where total monitoring is required. Available standard as an easy to tilt ground mount or a roof mount stand with legs or ballast. Our wind turbines can be configured to match any site or wind condition. With our blade designs and sizes, multiple tiers and blade configurations, ...
-
Manufactured by American Hydrotech, Inc.based in USA
Hydroguard provides both insulation and lightweight ballasting for PMR assemblies. Composed of 2 ft. x 4 ft. Styrofoam™ panels topped with latex modified concrete and tongue and groove edges along the long sides allow each board to be interlocked during installation, creating a continuous layer of thermal protection. Hydroguard acts as a durable barrier, protecting the roofing membrane from ...
-
Manufactured by BQ Energybased in USA
BQ Energy built our reputation by developing wind energy facilities on brownfield sites. We are well known for having pioneered this market by bringing the 36 MW Steel Winds facility in Lackawanna NY to a commercial ...
-
based in USA
GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and ...
-
Manufactured by Bergey Wind Power Co.based in USA
The BWC Excel 10 is a modern 7 meter (23 ft) diameter, 10 kW wind turbine designed for high reliability, low maintenance, and automatic operation in adverse weather ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
Manufactured by NRG Systemsbased in USA
An advanced, 26-channel data logging system, SymphoniePRO is purpose-built for the renewable energy professional. As the newest data logger in the Symphonie series, SymphoniePRO brings significant upgrades in terms of capability and flexibility while building on the unparalleled foundation that is the Symphonie product line—a series of application-specific and user-friendly data ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you