Wind Turbine equipment available in Latin America

  • Premium

    Model KW3 - Small Wind Turbines

    The KW3 is the smallest turbine in the Kingspan Wind range. It is ideally suited for remote access sites, small domestic properties, telecoms, off-grid applications and also light industrial and farming. The intelligent design of the KW3 ensures consistently high performance in all wind speeds. Our unique over-speed protection system ensures ...

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • Premium

    Model KW3Ex - Small Wind Turbine

    Based on the KW3 wind turbine, the KW3EX has been optimized for the harsh environment experienced off-shore.

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • Model WIND + - Small Wind Turbines

    Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown result.

    By Bornay based in Castalla (Alicante), SPAIN. from Small Wind Turbines Product line

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • ENERCON - Model E-44 / 900 kW - Wind Turbines

    Rated power: 900 kW, Rotor diameter: 44 m, Hub height: 45 m / 55 m, Wind class (IEC): IEC/NVN IA, Turbine concept: Gearless, variable speed, single blade adjustment.

    By ENERCON GmbH based in Aurich, GERMANY. from Wind Turbines Product line

  • Leading Edge - Model LE-600 - Wind Turbine

    Our LE-600 wind turbine is our  1.54m Dia wind turbine that is capable of producing outputs up to 750W. The LE-600 has an innovative ‘downwind’ arrangement which means that the rotor is at the back of the turbine. This means that the turbine is working in harmony with the forces of nature resulting in a stable and capable wind ...

    By Leading Edge Turbines Ltd based in Pontrilas, UNITED KINGDOM. from Wind Turbines Product line

  • Model V47 500kW - Wind Turbine

    There are currently over 640 turbines of 500kW Vestas RRB Energy models installed to date. RRB Energy Ltd., formerly known as Vestas RRB India Ltd. was created in 1987 as a joint venture between RRB Consultants and Engineers Private Ltd. of India and Vestas Wind Systems A/S of Denmark. Vestas was one of the earliest major european wind ...

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbines Product line

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Senvion - Model 3.XM Series - Wind Turbine

    The 3.XM series is the flagship of our onshore portfolio. It comes with a range of different turbine types and rotor sizes for maximum flexibility and economic efficiency, even under demanding conditions. Different hub heights allow you to access and develop highly diverse locations. Its versatility makes the 3.XM series one of the most popular in ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 1.5/77 - Wind Turbine

    Wind Turbine  With its 77 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 1.5/77 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 1.5/77 ensures that ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • General Electric - Model 1.5 - 77 - Wind Turbine

    Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Senvion - Model 6.XM series - Wind Turbine

    Over 25 years in the business, more than 6,600 wind turbine installations worldwide with a combined output of more than 13 gigawatts and uncompromising engineering skills have all earned Senvion one of the best reputations in the wind energy industry. Our company pioneered 5MW+ wind turbines for the offshore sector and was also the first to offer ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N117 (2.4 Megawatt) - Wind Turbine

    The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • General Electric - Model 3.2-103 - Wind Turbine

    Building on the exceptional performance of the 2.5 MW fleet, GE’s new 3.2-103 brilliant wind turbine generates an impressive 5% increase in energy output while providing the same reliable performance of the 2.85-103. As a brilliant turbine, the 3.2-103 utilizes the power of the Industrial Internet to help manage the variability of wind, ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Sunforce - Wind Turbine

    Generate power day and night with the Sunforce 600 Watt Wind Turbine. This versatile wind turbine charges both 12 Volt and 24 Volt battery banks to help run your appliances and electronics. Ideal for cabins, 12 Volt battery charging, remote power, back-up power and more, this unit is made with aerodynamic fiber glass blades to ensure low wind ...

    By Sunforce Products Inc. based in Montreal West, QUEBEC (CANADA). from Wind Turbines Product line

  • Senvion - Model MM-Series - Wind Turbine

    The MM series is the bestseller in our onshore portfolio. With more than 3,500 turbines in operation, these models have become the standard choice in the 2 MW class. Hardly surprising, as this model can be used anywhere in the world, even in extreme climatic conditions, thanks to alternative versions for hot and cold climates. Three types of ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you