Wind Turbine Equipment For Rated Power Under 2,300,000 Watt Available In Latin America
-
Manufactured by Norwin A/Sbased in DENMARK
Nominal electric power : 200/500 kW. Power regulation : Active Stall Regulation (ASR). IEC wind class : IB and IIA. Rotor diameter : 47 m. Rotor speed : 25.2 rpm at full ...
-
Manufactured by Siemens Gamesa Renewable Energybased in SPAIN
reliability and suitability for all kinds of sites and wind conditions, from the most challenging locations to low and medium wind speed sites. Thanks to this performance, the platform's installed capacity stands at over 18,600 MW worldwide, while average fleet availability is running at over ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES100 is a two bladed, high performance, reliable 100 kW midsize wind turbine with a rotor diameter of 18 meters. This wind turbine is especially designed for areas with a higher wind speed. The mechanical part of the WES100 is based on the original, proven design from 1983. For the electrical parts ...
-
Manufactured by Bora Energybased in USA
Design Specification: Design Class: IEC Class 2. Max Avg. Wind Speed: 42.5 m/s. Performance: Rated Wind Speed: 9 m/s. Operating Range: 2.5 - 25 ...
-
Manufactured by Eocyclebased in CANADA
The EOX S-16 turbine is on the cutting edge of wind technology. Its extraordinarily simple design—with very few moving parts—results in high reliability and low maintenance costs. With no gearbox, your turbine will operate smoothly, reliably and with minimal maintenance for its 30-year ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES250 is a two bladed, high performance, reliable midsize 250kW wind turbine with a rotor diameter of 30 meters.The mechanical part of the WES250 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used.WES250 turbines are manufactured and exported by ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
SWP-25kW is a Class 3-wind turbine based on proven technology which ensures high energy production. SWP-25kW is a Class 3-turbine based on proven technology which ensures high energy production, a long and problem-free life cycle and, not least, a very low noise level. It can also be delivered in a 10kW version, which is optimal for ...
-
Manufactured by Norwin A/Sbased in DENMARK
Nominal electric power: 200 kW. Power regulation: Stall. Rotor size: Diameter 29.1 m (95.4 ft). Rotor speed: 37.6 rpm at full load. Rotor: Three blades placed upwind of tower. Swept area: 664 m2 (7145 ft2). Tilt angle: 5°. Coning angle: ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
SWP-19.8kW is a Class 3-wind turbine based on proven technology which ensures high energy production. SWP-20kW is a rock solid Class 2-wind turbine which has been developed for sites especially abundant with wind. The wind turbine is based on proven technology which ensures high ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
19.8kW/20kW (14TG) is a rock solid Class 2-wind turbine, grid connected according to CEI - which has been developed for sites especially abundant with wind. SWP-20kW is a rock solid Class 2-wind turbine which has been developed for sites especially abundant with wind. The wind ...
-
Manufactured by Norwin A/Sbased in DENMARK
Nominal electric power: 225 kW. Power regulation: Stall. Rotor size: Diameter 29.1 m (95.4 ft). Rotor speed: 37.6 rpm at full load. Rotor: Three blades placed upwind of tower. Swept area: 664 m² (7145 ft2). Tilt angle: 5°. Coning angle: ...
-
Manufactured by Norwin A/Sbased in DENMARK
Nominal electric power: 180/750 kW. Power regulation: Active Stall Regulation (ASR). Rotor size: Diameter 47 ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES80 is a two bladed, high performance, reliable 80 kW midsize wind turbine with a rotor diameter of 18 meters with a new cover. The mechanical part of the WES80 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES80 turbines are ...
-
Manufactured by Sunforce Products Inc.based in CANADA
Generate power day and night with the Sunforce 600 Watt Wind Turbine. This versatile wind turbine charges both 12 Volt and 24 Volt battery banks to help run your appliances and electronics. Ideal for cabins, 12 Volt battery charging, remote power, back-up power and more, this unit is made with aerodynamic fiber glass blades to ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos residential vertical axis wind turbine is a low start wind speed, quiet, safe and reliable vertical wind turbine. We use outer rotor three-phase generator with a 1.5m/s start wind speed. Aeolos 300w vertical axis wind turbine was widely applied for home, ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-1000 VDC. Start of feed-in at approx. 100 rpm. ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 7.0 m/sec. we use a repeller with 5.8 m ...
-
Manufactured by Bergey Wind Power Co.based in USA
With a rotor diameter of 2.5 meters (8.2 ft) and a peak output spiking over 2,000 watts the Excel 1 is a perfect system upgrade for current owners of solar-only off-grid systems along with light telecom and other high reliability off grid applications. Following the same simple design as the larger Excel turbines, the Excel 1 has been a ...
-
Manufactured by RexCo Technologybased in CHINA
VAWTs are better able to harvest turbulent air flow found around buildings and other structures. VAWTs are ideal for both rural and urban applications, including rooftop installations. Depending on the shape of the roof, the wind flow over the roof can be concentrated, leading to an increased energy output. Simple to install and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you