Nordex Wind Turbine Equipment
-
Manufactured by Nordex SEbased in GERMANY
With the Delta Generation, Nordex customers benefit from the know-how the Nordex Group has gathered in the multi-megawatt range over many years. Mature technical solutions that have proven their worth thousands of times form a sound basis for the generation of the 3 MW ...
-
Manufactured by Nordex SEbased in GERMANY
The N100/3300 is designed for strong wind speeds (IEC-1) and has a 32 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained ...
-
Manufactured by Nordex SEbased in GERMANY
The N131/3000 is specially designed for light-wind locations (IEC-3). With its 3.0 MW installed capacity the increase in rated output amounts to 25 percent. Despite the substantial increase in output, sound power level is limited to max. 104.5 ...
-
Manufactured by Nordex SEbased in GERMANY
As an all-round turbine in the 2.5 MW product line, the N90/2500 can be deployed at strong-wind sites. With different tower heights, it covers wind class IEC 1. Nordex also offers it with the option of a frequency of 50 or 60 hertz. This makes the N90/2500 a very versatile 2.5 MW turbine and the classic in the series. Hundreds ...
-
Manufactured by Nordex SEbased in GERMANY
With the N149/4.0–4.5, the Nordex Group was the first company to launch a turbine platform with a flexible rating as part of its core design philosophy and operation strategy. This design approach, combined with a variety of operating modes, enables the Delta4000 turbine to adapt to the grid operator’s individual requirements, ...
-
Manufactured by Nordex SEbased in GERMANY
The N117/3000 is designed for medium wind speeds (IEC-2) and has a 20 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained ...
-
Manufactured by Nordex SEbased in GERMANY
The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine ...
-
Manufactured by Nordex SEbased in GERMANY
The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines ...
-
Manufactured by Nordex SEbased in GERMANY
With the Delta Generation, Nordex customers benefit from the know-how the Nordex Group has gathered in the multi-megawatt range over many years. Mature technical solutions that have proven their worth thousands of times form a sound basis for the generation of the 3 MW ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you