Wind Turbine Equipment In Europe
-
Manufactured by Venturbine Technologybased in TURKEY
. Flange steel. Initial wind speed 2.5 m/s. Charging wind speed (approx.) 4 m/s. Turbine rotation 360*. ...
-
Manufactured by Eshia S.L.based in SPAIN
Not including regulator controller. The AERO350W AERO400W are special marine environments. The AERO400W with 5 blades is the quietest ...
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
Rated power: 2.05 MW. Rotor: 93 m. Wind class: IEC 2a. Cut-i wind speed: 3.5 m/s. Rated wind speed: 12 m/s. Cut-out wind speed: 25.0 m/s. Capacity factor*: 3,701 h, 42%. Sound power: 104.5 dB(A). Hub height tubular tower: 70 m | 85 m - 100 m. Drive trai concept - LARUS Compact: Mai gearbox i combinatio with torque bearing as a ...
-
Manufactured by AEROVIDE GmbHbased in GERMANY
Wind Turbine With its 77 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 1.5/77 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ ...
-
Manufactured by Vensys Energy AGbased in GERMANY
The ongoing reduction of energy costs will be continued with this platform. Transport optimisation through segmented design of components. Thirty years of experience using permanent magnet technology. Low-wear and low-maintenance rotor blade pitch system. Joint development with ...
-
Manufactured by AEROVIDE GmbHbased in GERMANY
in all climate zones around the world. aeroMaster technology provides the licensee with a product which is characterized by extreme flexibility and reliability as experience from almost 30 years of development projects for wind turbines has flown into this ...
-
Manufactured by AEROVIDE GmbHbased in GERMANY
flexibility and reliability as experience from almost 30 years of development projects for wind turbines has flown into this ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The S-52 600 KW is similar to the S–66 1.25, but with lower energy generation capacities. Between 2006 and 2014, 762 turbines with a total installed capacity of 457 MW were ...
-
Manufactured by AEROVIDE GmbHbased in GERMANY
operation in all climate zones around the world. aeroMaster technology provides the licensee with a product which is characterized by extreme flexibility and reliability as experience from almost 30 years of development projects for wind turbines has flown into this ...
-
Manufactured by AEROVIDE GmbHbased in GERMANY
operation in all climate zones around the world. aeroMaster technology provides the licensee with a product which is characterized by extreme flexibility and reliability as experience from almost 30 years of development projects for wind turbines has flown into this ...
-
Manufactured by Suzlon Energy Limitedbased in INDIA
The S66-1.25 MW was designed for generating the optimal power output even at sites with a modest wind speed regime. S66-1.25 MW is equipped with a dual-speed, dual-rating asynchronous generator; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide ...
-
Manufactured by Baltic WindWerke GmbH & Co. KGbased in GERMANY
The high-yield BW 4500 wind turbine is particularly suitable for medium and low-wind locations. With a rotor diameter of 151 m and hub heights of up to 140 m, the 4.5 megawatt turbine delivers very high yields even in low wind conditions. Various tower designs and a low-maintenance construction reduce the ...
-
Manufactured by Vensys Energy AGbased in GERMANY
Lower repair and maintenance costs through high-quality and durable components. Fully encapsulated generator cooling system with air-to-air heat exchangers. High-quality permanent magnets for a higher energy yield.Low-wear and low-maintenance blade pitch system with toothed belt ...
-
Manufactured by ENERTRAGbased in GERMANY
Wind turbines must be marked as an obstacle to aviation as soon as they exceed a total height of 100 meters. In practice, this means that entire wind farms flash red at night to warn approaching pilots. This lighting has become one of the biggest acceptance problems in the realization of wind energy projects, because it can also ...
-
Manufactured by Baltic WindWerke GmbH & Co. KGbased in GERMANY
The 2.0 megawatt wind turbine is designed for high yields, but can also be adapted to low-wind sites (IEC 3). Large rotors with a diameter of 93 and 100 m ensure high yields. As a cold-climate version (CCV) and hot-climate version (HCV), the FW 2000 is also suitable for sites with extreme climatic conditions. ...
-
Manufactured by Free Breeze Energy Systems Ltdbased in CANADA
Free Breeze offers re-manufactured V80's with the same warranty as new. It has always been a premier performer in its class, and has made it the turbine of choice for a wide variety of applications, including wind farms and community power projects. Not surprisingly, an acclaimed pedigree has laid the foundation for the turbine's ...
-
Manufactured by ENESSERE S.r.l.based in ITALY
Pegasus Wind Turbine represents the future for us at ENESSERE: a wind turbine that synthesizes environment and harmony, elegant design and customizable solutions. The goal is to reach total energy independence via a 100% Made in Italy wind turbine. A man-made technology, for men. The research ...
-
Manufactured by ENESSERE S.r.l.based in ITALY
Pegasus Wind Turbine represents the future for us at ENESSERE: a wind turbine that synthesizes environment and harmony, elegant design and customizable solutions. The goal is to reach total energy independence via a 100% Made in Italy wind turbine. A man-made technology, for men. The research ...
-
Manufactured by DAFA Group A/Sbased in DENMARK
DAFA RotaSeal Wind – durable sealing solutions for rotating parts in wind turbines. Maximize a wind turbine’s up-time with DAFA RotaSeal, which repels water, sand, salt and other particles from ingress into critical wind turbine components such as electronics and ...
-
Manufactured by W2E Wind to Energy GmbHbased in GERMANY
The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you