Only show results in Virginia? Ok

Wind Turbine Design equipment

  • Premium

    Model KW3 - Small Wind Turbines

    The KW3 is the smallest turbine in the Kingspan Wind range. It is ideally suited for remote access sites, small domestic properties, telecoms, off-grid applications and also light industrial and farming. The intelligent design of the KW3 ensures consistently high performance in all wind speeds. Our unique over-speed protection system ensures ...

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • Premium

    Model KW3Ex - Small Wind Turbine

    Based on the KW3 wind turbine, the KW3EX has been optimized for the harsh environment experienced off-shore.

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • Premium

    Wind Energy Tailored Solutions

    Ahlstrom is one of the leading suppliers to the wind energy market, delivering glass fiber products for use within both onshore and offshore turbine blades. Due to our extensive understanding of the properties of glass fiber within blades, Ahlstrom has developed superior solutions together with our customers. Ahlstrom is well positioned to develop ...

    By Ahlstrom-Munksjö based in Helsinki, FINLAND. from Wind Energy Product line

  • Smart!wind - Wind Turbine Inverter

    The feed-in converter smart!wind was designed by SPE especially for small wind turbines (SWT) with a power range from 5.5 to 20 kW. Besides the control functions for a SWT the smart!wind provides several protective functions supporting a safe operation of your SWT. Small hydro plants as well as CHP’s

    By BRAUN Windturbinen GmbH based in Nauroth, GERMANY. from Wind-Inverter Product line

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

  • Renewegy - Model VP-20 - Wind Turbine

    Renewegy is the realization of a dream to bring decades of clean energy product development experience to the wind and high-efficiency propulsion markets. They believe in making the right choices, and want to help our customers do the same. They want to crush the notion that wind energy isn’t economical.

    By Harvest Energy Solutions based in Jackson, MICHIGAN (USA). from Wind Product line

  • AEC - Model WIND 3D 100 - Innovation Turbine

    Aec wiND turbines provide many unique advantages: Performance The performance of aecwind turbines during low wind speedsffrom 2 5 m/s,9km/h),as with high speeds) up to 36 m/s,l30km/h),allows you to generate far greater levels of electricity than traditional wind turbines with the same bulk. Robustness The reinforced structure was designed and ...

    By Allis Electric Co., Ltd. based in Taipei, TAIWAN.

  • Model WIN80083 - Wind Turbine System (2kW)

    Designed for commercial wind turbine installations where total monitoring is required. Available standard as an easy to tilt ground mount or a roof mount stand with legs or ballast. Our wind turbines can be configured to match any site or wind condition. With our blade designs and sizes, multiple tiers and blade configurations, we can supply you ...

    By Royall Power based in Reedsburg, WISCONSIN (USA). from Wind Product line

  • Lely-Aircon - Model 10kW - Wind Turbines

    Virtually inaudible at 50m distance away. Designed, developed and manufactured in Germany during the late 90s to early 2000s by experienced wind turbine technicians adapting large wind turbine design principles. Robust design and build quality - ultra reliable reputation over 97% availability since market introduction in 2003. Installed worldwide ...

    By Greenthinking Energy Ltd based in Cullompton, UNITED KINGDOM. from Wind Turbines Product line

  • BENZ - Model PMG DD 100kW - Direct Drive – Permanent Magnet Wind Turbine

    This amazing Direct Drive, Permanent Magnet Wind Turbine is specially designed for low and medium wind speeds and applies the latest design in wind turbine technology. The direct drive, permanent magnet design guarantees reliable performance, efficiency, convenient transport easy installation and most importantly, very low maintenance.

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 1.5/77 - Wind Turbine

    Wind Turbine  With its 77 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 1.5/77 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 1.5/77 ensures that ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • Magellano - Model 2kW - Horizontal Axis Wind Generator Turbine

    The Magellano 2kW wind turbine stands out from all other small scale wind turbines due to its unique blade and hinge design which allows it to regulate its rotational speed, maximising output. The Magellano 2kW Wind Generator provides a comprehensive answer for off grid and grid connected power systems. ...

    By Windkinetic Wind Systems Group S.r.l. (WWS) based in Prato (PO), ITALY. from Wind Turbines Product line

  • Model nED100 - Wind Turbine for Small Companies

    Our nED100 wind turbine can help you reduce the energy bill of your SME. Our product has been specially designed to lighten the burden of the electrical consumption in SMEs’ bottom line. You do not have to take care of your nED100 and you do not need a lot of space to integrate it in your installations. You will become a consumer of ...

    By Norvento based in Lugo, SPAIN. from Wind Turbine Product line

  • Northwind - Model 100 - Wind Turbine

    The Northwind 100 wind turbine gives economical, reliable power to grid connected systems all over the world.  Rated at 100 kW the Northwind 100 utilises the best technology available today, incorporating a permanent magnet generator and gearless design, maximizing the return on investment on small to medium sized wind energy projects.

    By Altergen Ltd. based in Shrewsbury, UNITED KINGDOM. from Wind Turbine Product line

  • Magellano - Model 2kW - Horizontal Axis Wind Generator Turbine

    The Magellano 15kw wind turbine stands out from all other small scale wind turbines due to its unique blade and hinge design which allows it to regulate its rotational speed, maximising output - as the wind gets stronger the blades pitch and cone, protecting the turbine, and allowing continual operation during the fiercest of storms. Magellano ...

    By Windkinetic Wind Systems Group S.r.l. (WWS) based in Prato (PO), ITALY. from Wind Turbines Product line

  • Model WIN80082 - Wind Turbine System (750w)

    More Power Output at Lower Speeds: This wind turbine is built to last, and comes with a 5 year warranty. Wind turbines can be configured to match any site or wind condition. With our blade design and configuration, we can supply you with the proper wind turbine for your particular project. This wind turbine is only available as an apex roof mount ...

    By Royall Power based in Reedsburg, WISCONSIN (USA). from Wind Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you