Only show results in Virginia? Ok

wind turbine developer equipment

  • Model WIND + - Small Wind Turbines

    Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown result.

    By Bornay based in Castalla (Alicante), SPAIN. from Small Wind Turbines Product line

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

  • Premium

    Wind Energy Tailored Solutions

    Ahlstrom is one of the leading suppliers to the wind energy market, delivering glass fiber products for use within both onshore and offshore turbine blades. Due to our extensive understanding of the properties of glass fiber within blades, Ahlstrom has developed superior solutions together with our customers. Ahlstrom is well positioned to develop ...

    By Ahlstrom-Munksjö based in Helsinki, FINLAND. from Wind Energy Tailored Solutions Product line

  • Wind Technik Nord - Model WTN 250kW - Wind Turbine

    The WTN 250 is a product of development, which is based on more than 25 years of constant experience in wind turbine design and production. It is composed of well-tested parts and reliably operating construction elements combined with modern technical know-how. In that way we achieve the optimum in converting wind power ...

    By Wind Technik Nord GmbH based in Enge-Sande, GERMANY.

  • Renewegy - Model VP-20 - Wind Turbine

    Renewegy is the realization of a dream to bring decades of clean energy product development experience to the wind and high-efficiency propulsion markets. They believe in making the right choices, and want to help our customers do the same. They want to crush the notion that wind energy isn’t economical.

    By Harvest Energy Solutions based in Jackson, MICHIGAN (USA). from Wind Turbine Product line

  • Senvion - Model 3.XM Series - Wind Turbine

    The 3.XM series is the flagship of our onshore portfolio. It comes with a range of different turbine types and rotor sizes for maximum flexibility and economic efficiency, even under demanding conditions. Different hub heights allow you to access and develop highly diverse locations. Its versatility makes the 3.XM series one of the most popular in ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbine Product line

  • Gamesa - Model 5.0 MW - Wind Turbines

    Once again, Gamesa has demonstrated that it has the knowledge, experience and resources needed to develop wind turbines capable of extracting maximum power from the wind. The Spanish company has taken a leap forward in one of its biggest, most ambitious technological challenges to date: the design and development of the Gamesa 5.0 MW platform. ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Lely-Aircon - Model 10kW - Wind Turbines

    Virtually inaudible at 50m distance away. Designed, developed and manufactured in Germany during the late 90s to early 2000s by experienced wind turbine technicians adapting large wind turbine design principles. Robust design and build quality - ultra reliable reputation over 97% availability since market introduction in 2003. Installed worldwide ...

    By Greenthinking Energy Ltd based in Cullompton, UNITED KINGDOM. from Wind Turbines Product line

  • aeroMaster - Model aM 2.5/96 - Wind Turbine

    With its 96 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 2.5/96 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 2.5/96 ensures that operation is safe ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/96 - Wind Turbine

    With its 96 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 2.5/96 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 2.5/96 ensures that operation is safe ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • Eno - Model 100 | 2,2 MW - Wind Turbine

    Highest efficiency – This is what construction and design of the eno 100 stands for. Based on the established platform of eno 92 added by a rotor diameter of 100 meters and with this about 18 % more swept area, the eno 100 combines optimally compactness, solid engineering and much increased yields. The design of eno 100 is specialy developed ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbine Product line

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • GE - Model 1.7-100/103 - Wind Turbine

    GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • aeroMaster - Model aM 1.5/83 - Wind Turbine

    With its 83 m rotor diameter and design for TC2A wind conditions, aeroMaster 1.5/83 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 1.5/87 - Wind Turbine

    With its 87 m rotor diameter and design for TC3A wind conditions, aeroMaster 1.5/87 meets the highest demands concerning energy yield and operational safety and is designed for operation at low wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable operation ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 1.5/92 - Wind Turbine

    With its 92 m rotor diameter and design for TC3B wind conditions, aeroMaster 1.5/92 meets the highest demands concerning energy yield and operational safety and is designed for operation at low wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable operation ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you