Only show results in Virginia? Ok

Wind Turbine Generator equipment

  • Model FX Series - Wind Turbine Generator

    The ESPE FX range is the 50, 60, 75, 100 kW wind turbine generator family capable of starting up when the wind speed reaches 2.8 m/s. Once the wind speed reaches 9.5 m/s the blade is at its rated power which, thanks to an aerospace type conceptual design, it will maintain until a speed of 25 m/s, the wind speed over which the WTG will go into ...

    By ESPE Group based in Grantorto (PD), ITALY. from Small Wind Turbines Product line

  • AVANTIS - Wind Turbine Generators

    The AVANTIS engineers have developed a product family of wind turbine generators for onshore. It includes the AV 928 – 2.5 MW for Wind Class IEC II and the AV 1010 – 2.3 MW for Wind Class III. Furthermore, WTG with higher rated powers are on the drawing board.

    By AVANTIS Energy Group based in Hamburg, GERMANY.

  • Suzlon - Model S97 - Wind Turbine Generator – 2.1MW

    S97 Wind Turbine Generator is a part of our latest 2.1 MW range of products, the S97 Wind Turbine Generator (WTG) has been designed to make low wind sites viable.

    By Suzlon Energy Limited based in Hadapsar, INDIA.

  • ALEKO - Model 900W - 12V - Wind Turbine Generator with CD5 Controller

    ALEKO WG900 Wind Generator is 900W 12 volt model with 3 blades. Fresh 2012 version just shipped from the factory. This is the latest design model. This item is new in the factory unopened box. Comes with instruction manual and 1-year warranty from purchase date.

    By Aleko Products based in Kent, WASHINGTON (USA). from Wind Turbines - 12 Volt Product line

  • Model (0.3-100kw) - Horizontal Wind Turbine Generator, HAWT

    A wind turbine, which is installed on top of a tall tower, collects kinetic energy from the wind and converts it to electricity that is compatible with a home's electrical system. In a normal residential application, a home is served simultaneously by the wind turbine and a local utility. If the wind speeds are below cut-in speed (7-10 mph) there ...

    By Xinda Green Energy Co.Limited based in Jiangsu, CHINA. from Wind Solar Power System Product line

  • Premium

    Model KW3Ex - Small Wind Turbine

    Based on the KW3 wind turbine, the KW3EX has been optimized for the harsh environment experienced off-shore.

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • Premium

    Model KW3 - Small Wind Turbines

    The KW3 is the smallest turbine in the Kingspan Wind range. It is ideally suited for remote access sites, small domestic properties, telecoms, off-grid applications and also light industrial and farming. The intelligent design of the KW3 ensures consistently high performance in all wind speeds. Our unique over-speed protection system ensures ...

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Small Wind Turbines Product line

  • WindKing - Supply FD18.0-50KW wind turbines ,wind generator

    FD18-50KW WIND GENERATOR l parameter blade diameter: 18.0m number of blades: 3 blade material: fiber glass rated wind speed: 13m/s start wind speed: 3.5m/s working wind speed: 3.5-20m/s security wind speed: 40m/s rated output power: 50kw max output power: 55kw rated speed: 80r/min type of generator: permanent-magnets- 3 phase A.C. speed ...

    By Qingdao windking windpower generator co.,ltd based in Qingdao, CHINA.

  • WindKing - Supply FD8.0-10KW wind turbines,wind generator

    FD8.0-10KW WIND GENERATOR l parameter blade diameter: 8.0m number of blades: 3 blade material: fiber glass rated wind speed: 10m/s start wind speed: 3m/s working wind speed: 3-20m/s security wind speed: 40m/s rated output power: 10kw max output power: 15kw rated speed: 200r/min type of generator: permanent-magnets- 3 phase A.C. speed regulation: ...

    By Qingdao windking windpower generator co.,ltd based in Qingdao, CHINA.

  • WindKing - Supply FD12.5-30KW wind turbines,wind generator

    FD12.5-30KW WIND GENERATOR l parameter blade diameter: 12.5m number of blades: 3 blade material: fiber glass rated wind speed: 13m/s start wind speed: 3.5m/s working wind speed: 3.5-20m/s security wind speed: 40m/s rated output power: 30kw max output power: 35kw rated speed: 100r/min type of generator: permanent-magnets- 3 phase A.C. speed ...

    By Qingdao windking windpower generator co.,ltd based in Qingdao, CHINA.

  • WindKing - Supply wind turbines, wind generator FROM 1KW TO 5KW

    FD6.0-5KW WIND GENERATOR parameter blade diameter: 6.0m number of blades: 3 blade material: fiber glass rated wind speed: 10m/s start wind speed: 3m/s working wind speed: 3-25m/s security wind speed: 40m/s rated output power: 5kw max output power: 7kw rated speed: 220r/min type of generator: permanent-magnets- 3 phase A.C. speed regulation: ...

    By Qingdao windking windpower generator co.,ltd based in Qingdao, CHINA.

  • General Electric - Model 1.5 - 77 - Wind Turbine

    Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • General Electric - Model 4.1 – 113 - Wind Turbine

    GE’s 4.1-113 combines a proven design with GE’s unparalleled reliable technology to deliver the only built for purpose offshore wind turbine. The 4.1-113 is designed specifically for the offshore environment, with reliability and availability as the primary drivers. This machine includes direct-drive technology, built-in redundancy in ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • General Electric - Model 2.85-100 and 2.85-103 - Wind Turbine

    GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • General Electric - Model 3.2-103 - Wind Turbine

    Building on the exceptional performance of the 2.5 MW fleet, GE’s new 3.2-103 brilliant wind turbine generates an impressive 5% increase in energy output while providing the same reliable performance of the 2.85-103. As a brilliant turbine, the 3.2-103 utilizes the power of the Industrial Internet to help manage the variability of wind, ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • General Electric - Model 2.75-120 - Wind Turbine

    GE’s 2.5 MW product platform is evolving towards a wider range of site applications by introducing the 2.75-120 wind turbine designed for IEC Wind Class III environments. This new turbine features a 120-meter rotor in combination with the proven single-blade pitch control that offers the latest enhancements in load management controls, low ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you