Only show results available in Virginia? Ok

Wind Turbine Production equipment

  • Model WIND + - Small Wind Turbines

    Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown result.

    By Bornay based in Castalla (Alicante), SPAIN. from Small Wind Turbines Product line

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • Premium

    Wind Energy Tailored Solutions

    Ahlstrom is one of the leading suppliers to the wind energy market, delivering glass fiber products for use within both onshore and offshore turbine blades. Due to our extensive understanding of the properties of glass fiber within blades, Ahlstrom has developed superior solutions together with our customers. Ahlstrom is well positioned to develop ...

    By Ahlstrom-Munksjö based in Helsinki, FINLAND. from Wind Energy Product line

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

  • Renewegy - Model VP-20 - Wind Turbine

    Renewegy is the realization of a dream to bring decades of clean energy product development experience to the wind and high-efficiency propulsion markets. They believe in making the right choices, and want to help our customers do the same. They want to crush the notion that wind energy isn’t economical.

    By Harvest Energy Solutions based in Jackson, MICHIGAN (USA). from Wind Product line

  • Model WIN80083 - Wind Turbine System (2kW)

    Designed for commercial wind turbine installations where total monitoring is required. Available standard as an easy to tilt ground mount or a roof mount stand with legs or ballast. Our wind turbines can be configured to match any site or wind condition. With our blade designs and sizes, multiple tiers and blade configurations, we can supply you ...

    By Royall Power based in Reedsburg, WISCONSIN (USA). from Wind Product line

  • General Electric - Model 1.5 - 77 - Wind Turbine

    Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Senvion - Model 6.XM series - Wind Turbine

    Over 25 years in the business, more than 6,600 wind turbine installations worldwide with a combined output of more than 13 gigawatts and uncompromising engineering skills have all earned Senvion one of the best reputations in the wind energy industry. Our company pioneered 5MW+ wind turbines for the offshore sector and was also the first to offer ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Gamesa - Model G80 - Multi-megawatt Wind Turbine

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Nordex - Model N117 (2.4 Megawatt) - Wind Turbine

    The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 1.5/77 - Wind Turbine

    Wind Turbine  With its 77 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 1.5/77 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 1.5/77 ensures that ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • GE - Model 2.2-2.4 MW - Platform Wind Turbine

    GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • VENSYS - Model 1.5 MW - Gearless Wind Turbines

    Gearless and with permanent magnet technology instead of excitation power and gearbox losses. With an air-cooled generator and air-cooled VENSYS frequency converter for the most varied grid requirements.

    By Vensys Energy AG based in Neunkirchen / Wellesweiler, GERMANY. from Wind Turbines Product line

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Magellano - Model 2kW - Horizontal Axis Wind Generator Turbine

    The Magellano 2kW wind turbine stands out from all other small scale wind turbines due to its unique blade and hinge design which allows it to regulate its rotational speed, maximising output. The Magellano 2kW Wind Generator provides a comprehensive answer for off grid and grid connected power systems. ...

    By Windkinetic Wind Systems Group S.r.l. (WWS) based in Prato (PO), ITALY. from Wind Turbines Product line

  • Magellano - Model 2kW - Horizontal Axis Wind Generator Turbine

    The Magellano 15kw wind turbine stands out from all other small scale wind turbines due to its unique blade and hinge design which allows it to regulate its rotational speed, maximising output - as the wind gets stronger the blades pitch and cone, protecting the turbine, and allowing continual operation during the fiercest of storms. Magellano ...

    By Windkinetic Wind Systems Group S.r.l. (WWS) based in Prato (PO), ITALY. from Wind Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you