wind turbine production equipment available in Africa

  • Showcase

    XANT - Model M-24 - Mid Size / Small Wind Turbines 95 KW Direct Drive Typhoon Proof

    The M-24 is a direct drive 95kW windturbine Class IIIA = low average windspeed and windgusts up to 50m/s Fits in only one 40 foot container Tower is available in a free standing tower and guy wired tower which has a crane-less installation Concrete-less foundation available Cold Climate package including blade heating available Hot climate package ...

    By XANT NV based in Brussels, BELGIUM.

  • Model WIND + - Small Wind Turbines

    Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown result.

    By Bornay based in Castalla (Alicante), SPAIN. from Small Wind Turbines Product line

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-WIND LLC based in Winter Garden, FLORIDA (USA).

  • Premium

    XANT - Model L-33 - 330kW Direct Drive Wind Turbine (Typhoon Proof)

    Based on the succesfull certified platform of the XANT M (100kW), we develloped a 330kW direct drive wind turbine. As the XANT M windturbine, the XANT L is available: -/ in a stand alone tower and a guy wired tower which allows a crane-less installation. -/ with an optional concrete-less foundation.

    By XANT NV based in Brussels, BELGIUM.

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

  • Premium

    Wind Energy Tailored Solutions

    Ahlstrom is one of the leading suppliers to the wind energy market, delivering glass fiber products for use within both onshore and offshore turbine blades. Due to our extensive understanding of the properties of glass fiber within blades, Ahlstrom has developed superior solutions together with our customers. Ahlstrom is well positioned to develop ...

    By Ahlstrom-Munksjö based in Helsinki, FINLAND. from Wind Energy Tailored Solutions Product line

  • General Electric - Model 1.5 - 77 - Wind Turbine

    Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • General Electric - Model 2.75-120 - Wind Turbine

    GE’s 2.5 MW product platform is evolving towards a wider range of site applications by introducing the 2.75-120 wind turbine designed for IEC Wind Class III environments. This new turbine features a 120-meter rotor in combination with the proven single-blade pitch control that offers the latest enhancements in load management controls, low ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Eno - Model 126 | 3,5 MW - Wind Turbine

    The optimized aerodynamic rotor together with the advanced carbon fibre technology of the eno 126 are the reason for the high-level optimisation of economic efficiency and charge reduction. Special innovative detailed solutions, combined with a robust engine construction make the eno 126 to a solid long-term investment in the new generation of ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbine Product line

  • GE - Model 1.85-87 - Wind Turbine

    GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 m/s.

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Nordex - Model N100 (2.5 Megawatt) - Wind Turbine

    The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbine Product line

  • Leading Edge - Model LE-300 - Wind Turbine

    The LE-300 wind turbine, a compact and quiet horizontal axis turbine, is considered to be the most rugged reliable small wind turbine in its class. All at an affordable price! There are two versions to choose from: the LE-300 for off-grid home and industrial applications on land; and the LE-300 Marine, fully optimised for marine conditions. ...

    By Leading Edge Turbines Ltd based in Pontrilas, UNITED KINGDOM. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/96 - Wind Turbine

    With its 96 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 2.5/96 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 2.5/96 ensures that operation is safe ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • aeroMaster - Model aM 2.5/96 - Wind Turbine

    With its 96 m rotor diameter and design for TC2A+ wind conditions (extreme wind speeds of TC1), aeroMaster 2.5/96 meets the highest demands concerning energy yield and operational safety and is designed for operation at high wind speeds. Incorporation of special wind class TC2A+ into the design of aeroMaster 2.5/96 ensures that operation is safe ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbine Product line

  • Nordex - Model N90 (2.5 Megawatt) - Wind Turbine

    As an all-round turbine in the 2.5 MW product line, the N90/2500 can be deployed at strong-wind sites. With different tower heights, it covers wind class IEC 1. Nordex also offers it with the option of a frequency of 50 or 60 hertz. This makes the N90/2500 a very versatile 2.5 MW turbine and the classic in the series. Hundreds are in operation in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbine Product line

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Senvion - Model 6.XM series - Wind Turbine

    Over 25 years in the business, more than 6,600 wind turbine installations worldwide with a combined output of more than 13 gigawatts and uncompromising engineering skills have all earned Senvion one of the best reputations in the wind energy industry. Our company pioneered 5MW+ wind turbines for the offshore sector and was also the first to offer ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you