Wind Turbine Rotor Equipment Available In USA
-
Manufactured by Saertex GmbH & Co.KGbased in GERMANY
material is used in the manufacture of rotor blades for wind turbines and thus meets all the high requirements in the field of energy generation from wind power. Our new Glass UD fabrics allow us to meet market requirements while also guaranteeing our customers improved quality of their composite ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
Tidal turbines are very much like underwater windmills except the rotors are driven by consistent, fast-moving currents. The submerged rotors harness the power of the marine currents to drive generators, which in turn produce electricity. Water is 832 times denser than air and consequently tidal turbine rotors ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES250 is a two bladed, high performance, reliable midsize 250kW wind turbine with a rotor diameter of 30 meters.The mechanical part of the WES250 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used.WES250 turbines are manufactured ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES34/100 is a two bladed, high performance, reliable midsize 100kW wind turbine with a rotor diameter of 34 meters. The mechanical part of the WES34/100 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES34/100 turbines are ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES80 is a two bladed, high performance, reliable 80 kW midsize wind turbine with a rotor diameter of 18 meters with a new cover. The mechanical part of the WES80 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES80 ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES100 is a two bladed, high performance, reliable 100 kW midsize wind turbine with a rotor diameter of 18 meters. This wind turbine is especially designed for areas with a higher wind speed. The mechanical part of the WES100 is based on the original, proven design from 1983. For the ...
-
Manufactured by BFG Internationalbased in BAHRAIN
BFG International supports some of the world’s largest wind energy OEMs, including General Electric, Hitachi, LeitWind, and Gamesa, by providing lightweight, high performance spinners for wind turbines. The spinner, also known as a nose cone, is configured to be mounted on a hub of a wind turbine to which ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos 1kw vertical axis wind turbine is a low start wind speed, quiet, safe and reliable vertical wind turbine. We use outer rotor three-phase generator with a 1.5m/s start wind speed. It can be used for the 48v off-grid application or 110V grid tie application. Aeolos vertical ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos residential vertical axis wind turbine is a low start wind speed, quiet, safe and reliable vertical wind turbine. We use outer rotor three-phase generator with a 1.5m/s start wind speed. Aeolos 300w vertical axis wind turbine was widely ...
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos 600w rooftop wind turbine is a low start wind speed, quiet, safe and reliable vertical wind turbine. We use outer rotor three-phase generator with a 1.5m/s start wind speed. The rated output voltage is 48v for off grid application. Aeolos 600w vertical axis ...
-
based in USA
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
The LE-450 is the most powerful small wind turbine with a 1m rotor, able to provide meaningful power levels at everyday wind speeds of 5-8m/s (11-18mph), yet is tough enough to withstand winds of up to 40mph. The LE-450 is a quiet, powerful and lightweight 450W wind turbine for ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). 3-phase current. Separate rectifier. Either direction of rotation. Voltage 0-400 V. Start of feed-in at approx. 145 rpm. Power: 2.700 watts at ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage ...
-
Manufactured by TUGE Energia OÜbased in ESTONIA
TUGE10 is a class Ihorizontal axis small wind turbine for households and businesses. It is a 10 kW wind turbine with a 82 m2 rotor area and a 18 or 22 m hydraulic tilt-up tower. This is an upgraded, second generation version of our original 10 kW wind ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The polygeneration seeks to obtain a continuous supply of electrical energy depending on the energy sources availability and maximum fuel economy. An intelligent system prioritizes most suitable energy source at all ...
-
Manufactured by SOLARC Innovative Solarprodukte GmbHbased in GERMANY
Efficient operation of wind turbines or wind farms requires a long service life of the individual wind turbines. The trend is towards larger and more powerful wind turbines. The increasing size of the new wind turbines leads to a massive load in ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
A variable pitch controlled wind turbine with a 54 m rotor. Since installation of the first prototype in 1997, wind turbines with total capacity of over 20 MW have been installed with successful operation in Germany, Austria and Canada. The turbine is available in 50 m or 73 m hub heights. The ...
-
Manufactured by KLiUX Energies International Inc. (KLiUX)based in USA
It consists of a rotor, a tower and a generator. The rotor: maximum energy production, noise absence, birds friendly. The proprietary designed rotor is comprised of nine blades. Our “alfa” blade profile and the 9 blade rotor configuration is designed to allow maximum wind harnessing and to optimized ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you