Only show results in Virginia? Ok

Wind Turbine Rotor Blade equipment

  • Gaia-Wind - Model 133 11kW - Small Wind Turbine

    Gaia-Wind small wind turbine is specifically designed to maximise energy production in areas having low to moderate annual wind speeds of between 10-17mph.The Gaia-Wind 133 small wind turbine produces an energy yield ideally suited to farms, rural properties, businesses, and community projects – helping you reduce your energy costs and ...

    By Gaia-Wind Ltd. based in Port Dundas, UNITED KINGDOM.

  • Model ATB 60.28 DD - Two Bladed Wind Turbine Machine

    The ATB 60.28 DD is an upwind, two-bladed wind turbine with 60 kW rated power at grid side. The turbine with its 28 m rotor diameter will is designed for wind class IIIA with 37m hub height in accordance with the Germanischer Lloyd’s Guideline for the Certification of Wind Turbines, Edition 2010.

    By ATB Riva Calzoni SpA based in RONCADELLE (Bs), ITALY. from Wind Power Product line

  • WES - Model 250 Series - Wind Turbine

    The WES250 is a two bladed, high performance, reliable midsize 250kW wind turbine with a rotor diameter of 30 meters. The mechanical part of the WES250 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES250 turbines are manufactured and exported by ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • Viking Wind - Model 25 kW - Real Wind Turbine

    Viking 25 is a ”real” wind turbine and has the same beautiful appearance as the big MW wind turbines. A Viking 25 kWh wind turbine becomes a harmonious part of the landscape. The wind turbine is constructed according to the same well tested big wind turbines.

    By Viking Wind ApS based in Randers SØ, DENMARK.

  • Model WES 50 - Wind Turbine

    The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. For the electrical ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • GE - Model 2.5-120 and 2.75-120 - Wind Turbine

    Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust performance.

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • General Electric - Model 2.75-120 - Wind Turbine

    GE’s 2.5 MW product platform is evolving towards a wider range of site applications by introducing the 2.75-120 wind turbine designed for IEC Wind Class III environments. This new turbine features a 120-meter rotor in combination with the proven single-blade pitch control that offers the latest enhancements in load management controls, low ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • WES - Model 80 - Wind Turbine

    The WES80 is a two bladed, high performance, reliable 80 kW midsize wind turbine with a rotor diameter of 18 meters with a new cover. The mechanical part of the WES80 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES80 turbines are ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • CIESSE - Model 100Wheel - Direct Drive – Permanent Magnet Wind Turbine

    Ciesse Energia 100312-A (100Wheel) is a three-bladed last generation PM generator wind turbine, 100kW rated power with top quality components and high technological standards. The system is developed by Ciesse Energia, in collaboration with Soga Spa and other Italian partners, so the PM generator, yaw system, double converter, cabling, pitch ...

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbine Product line

  • WES - Model 100 - Wind Turbine

    The WES100 is a two bladed, high performance, reliable 100 kW midsize wind turbine with a rotor diameter of 18 meters. This wind turbine is especially designed for areas with a higher wind speed. The mechanical part of the WES100 is based on the original, proven design from 1983. For the electrical parts providing power conversion and ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • VENSYS - Model 2.5 MW - Gearless Wind Turbines

    With a significant increase in performance – and yet so compact. With a rotor diameter extended to 100, 109 and 112 meters for most high wind and low wind sites. The VENSYS 2.5 MW platform is the solution for the multi-megawatt range. Gearless and with permanent magnet technology instead of excitation power and gearbox losses. The full ...

    By Vensys Energy AG based in Neunkirchen / Wellesweiler, GERMANY. from Wind Turbines Product line

  • GE - Model 2.2-2.4 MW - Platform Wind Turbine

    GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Wind Technik Nord - Model WTN 500 kW - Wind Turbine

    The wind turbine WTN 500 is a pitch-controlled turbine with complete variable speed for operation parallel to the public grid. The rated output of the plant is 500 kilowatt; the rotor diameter is 48 meters. The rotor has three blades and is arranged in upwind position of the tower. Yawing into the wind is achieved by two electrically driven yaw ...

    By Wind Technik Nord GmbH based in Enge-Sande, GERMANY.

  • Eno - Model 100 | 2,2 MW - Wind Turbine

    Highest efficiency – This is what construction and design of the eno 100 stands for. Based on the established platform of eno 92 added by a rotor diameter of 100 meters and with this about 18 % more swept area, the eno 100 combines optimally compactness, solid engineering and much increased yields. The design of eno 100 is specialy developed ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbines Product line

  • Nordex - Model N100 (2.5 Megawatt) - Wind Turbine

    The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • General Electric - Model 2.85-100 and 2.85-103 - Wind Turbine

    GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • GE - Model 1.85-87 - Wind Turbine

    GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 m/s.

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Wind Technik Nord - Model WTN 600 kW - 600KW Wind Turbine

    The wind power plant WTN 600 is a pitch-controlled turbine with completely variable speed for operation parallel to the public grid. The rated output of the plant is 600 kilowatt; the rotor diameter is 46 or 48 meters. The rotor has three blades and is arranged in upwind position of the tower. Yawing into the wind is achieved by two electrically ...

    By Wind Technik Nord GmbH based in Enge-Sande, GERMANY.

  • Senvion - Model MM-Series - Wind Turbine

    The MM series is the bestseller in our onshore portfolio. With more than 3,500 turbines in operation, these models have become the standard choice in the 2 MW class. Hardly surprising, as this model can be used anywhere in the world, even in extreme climatic conditions, thanks to alternative versions for hot and cold climates. Three types of ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Eno - Model 126 | 3,5 MW - Wind Turbine

    The optimized aerodynamic rotor together with the advanced carbon fibre technology of the eno 126 are the reason for the high-level optimisation of economic efficiency and charge reduction. Special innovative detailed solutions, combined with a robust engine construction make the eno 126 to a solid long-term investment in the new generation of ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you