Only show results available in Virginia? Ok

Wind Turbine Structure equipment

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-100 - Small Wind Turbines System

    Design for light power outputs higher wind conditions 1-2kW is available. Standard build is 2 x 1.0 Kw generators. This design has 3 x 48' helix blades per side, designed to capture 360 degrees of air flow, with a low wind speed kick in of only 3-4 mph. Only 350 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • AEC - Model WIND 3D 100 - Innovation Turbine

    Aec wiND turbines provide many unique advantages: Performance The performance of aecwind turbines during low wind speedsffrom 2 5 m/s,9km/h),as with high speeds) up to 36 m/s,l30km/h),allows you to generate far greater levels of electricity than traditional wind turbines with the same bulk. Robustness The reinforced structure was designed and ...

    By Allis Electric Co., Ltd. based in Taipei, TAIWAN.

  • CIESSE - Model 100Wheel - Direct Drive – Permanent Magnet Wind Turbine

    Ciesse Energia 100312-A (100Wheel) is a three-bladed last generation PM generator wind turbine, 100kW rated power with top quality components and high technological standards. The system is developed by Ciesse Energia, in collaboration with Soga Spa and other Italian partners, so the PM generator, yaw system, double converter, cabling, pitch ...

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbine Product line

  • Space Frame Tower

    GE is pleased to introduce the space frame tower, a logistics friendly taller tower with an installation cycle time, aesthetic and service profile comparable to conventional tubular towers. Available for the 2.5/2.75-120 at 139m hub height, the space frame tower can be easily delivered to, and assembled at any project site, including those where ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • Leading Edge - Model LE-600 - Wind Turbine

    Our LE-600 wind turbine is our  1.54m Dia wind turbine that is capable of producing outputs up to 750W. The LE-600 has an innovative ‘downwind’ arrangement which means that the rotor is at the back of the turbine. This means that the turbine is working in harmony with the forces of nature resulting in a stable and capable wind ...

    By Leading Edge Turbines Ltd based in Pontrilas, UNITED KINGDOM. from Wind Turbines Product line

  • Nordex - Model N117 (2.4 Megawatt) - Wind Turbine

    The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Refurbished Wind Turbine

    Our initial market focus is on redeploying wind turbines in community wind projects throughout the Europe. Given the nascent nature of the refurbished wind markets we often develop our own projects, but prefer to work with other developers seeking a reliable solution to their community wind and/or net-meter project needs. With a lead-time of less ...

    By Repowering Solutions based in Madrid, SPAIN. from Wind Turbine Product line

  • Leading Edge - Model LE-300 - Wind Turbine

    The LE-300 wind turbine, a compact and quiet horizontal axis turbine, is considered to be the most rugged  & reliable small wind turbine in its class. All at an affordable price! There are two versions to choose from: the LE-300 for off-grid home and industrial applications on land; and the LE-300 Marine, fully optimised for marine ...

    By Leading Edge Turbines Ltd based in Pontrilas, UNITED KINGDOM. from Wind Turbines Product line

  • Leading Edge - Model LE-450 - Wind Turbine

    The LE-450 is the most powerful small wind turbine with a 1m rotor, able to provide meaningful power levels at everyday wind speeds of 5-8m/s (11-18mph), yet is tough enough to withstand winds of up to 40mph. The LE-450 is a quiet, powerful and lightweight 450W wind turbine for battery charging applications. Fully optimised for marine conditions, ...

    By Leading Edge Turbines Ltd based in Pontrilas, UNITED KINGDOM. from Wind Turbines Product line

  • Eno - Model 114 | 3.5 MW - Wind Turbine

    The maximum yield of wind farm is ensured by theeno 114, even at sites featuring higher ambient turbulence. 3,500 kWrated power output enables the turbine to be the most powerfulonshore turbine within the 3 MW class. With a perfect balance betweenrobust, conservative machine design and high level innovativedetails, the eno 114 reaches an ...

    By e.n.o. energy GmbH based in Ostseebad Rerik, GERMANY. from Wind Turbines Product line

  • Nordex - Model N117/3000 (3.0 megawatts) - Wind Turbine

    The N117/3000 is designed for medium wind speeds (IEC-2) and has a 20 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained stable.

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N100/3300 (3.3 megawatts) - Wind Turbine

    The N100/3300 is designed for strong wind speeds (IEC-1) and has a 32 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained stable.

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N131/3000 (3.0 megawatts) - Wind Turbine

    The N131/3000 is specially designed for light-wind locations (IEC-3). With its 3.0 MW installed capacity the increase in rated output amounts to 25 percent. Despite the substantial increase in output, sound power level is limited to max. 104.5 dB(A).

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N100 (2.5 Megawatt) - Wind Turbine

    The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N90 (2.5 Megawatt) - Wind Turbine

    As an all-round turbine in the 2.5 MW product line, the N90/2500 can be deployed at strong-wind sites. With different tower heights, it covers wind class IEC 1. Nordex also offers it with the option of a frequency of 50 or 60 hertz. This makes the N90/2500 a very versatile 2.5 MW turbine and the classic in the series. Hundreds are in operation in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Fiberline - Nacelle Floors

    Fiberline Planks are used as floors for wind turbine nacelles. The planks combine high strength with low weight and are also non-conducting and easy to install. The planks are non-corrosive so the structure requires virtually no maintenance.

    By Fiberline Composites A/S based in Middlefart, DENMARK. from Wind Turbine Components Product line

  • Aeolos - Monopole Towers

    The Monopole Towers were widely used from our 1kw to 50kw wind turbines. Monopole tower has good appearance, reliable structure and easily to be installed. The survival wind speed is 50m/s. Aeolso engineers use the FEM (Finite Element Method) to check the tower strength and vibration. The design lift time is 20 years for a monopole tower.

    By Aeolos Wind Energy Ltd based in London, UNITED KINGDOM. from Wind Turbine Tower Product line

  • Model MCS - Wind Turbine

    Wind turbine main control system is the control core of each fan, distributed in the tower and cabin crew. Since the operating environment of wind turbine site is bad, so the demand for the reliability of the control system is very high. The main control system is divided into the cabinet and the cabinet, with the wind turbine automatic start and ...

    By Anhui Leiton Electric Technology Co Ltd based in Hefei, CHINA. from Wind Power Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you