Lifeierte - Cartridge Filter Housing
From Process Filtration – Filter Housings
Cartridge filter housing system offers wide range of flow capacities & contaminant holding capacities. It’s diameters can accommodate around 1 to 500 cartridges. Cartridge filters are normally used as polishing filter in almost all types of process industries. These filtersare constructed with filter housing, filter cartridges, tube sheet, positive sealing arrangement for cartridge depending upon type of cartridge & choice of end connections. Positive sealing arrangement for cartridge filter assures there is no particle migration or fiber migration, even after high differential pressures.
-
Most popular related searches
Operation
Contaminated fluid enters the housing and is distributed evenly around the filter cartridges. Filtration takes place from outside to inside. Solids are collected on the outside of filter cartridges & clear filtrate is collected at outlet.
Features & Benefits
- High dirt holding capacity.
- Zero hold up design.
- Permanently piped housing is opened without special tools and disturbance of the piping.
- Machined cover gasket groove provide positive O-Ring sealing
- Easy to clean.
- In-line inlet and outlet high flow rates withpositive sealing arrangement to avoid bypassing.
- Suitable for double open end (DOE), Code 7 (226 O’-Ring) & 222 O’-Ring type filter cartridge.
- Accommodates 10″, 20″, 30″, 40″, 50” & 60” long filter cartridges.
- End connections for ?” to 24″ pipe.
- V posts or threaded center posts.
- Quick opening tri clovers design.
- Low down time.
- Flow rate up to 2000 m3/hr & More.
- Customized design available.
- Housings are permanently piped.
- All housings made from SS 316 L, SS 316 & SS304 are mirror polished & electro polished to resist adhesion of dirt and scale..
- Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel.
- ASME code stamp available.
- Duplex / Triplex / Jacketed cartridge filter unit designs are available.
- High temperature & high pressure design are available.
Technical Specifications
- Designed pressure: 0.75—1.0Mpa
- Designed temp: 20℃~80℃
- Seal type: O-ring/plain
- Seal material: NBR,Silicone,Viton
- Connection: Thread/Flange
- Filter cartridge: Plian/222/226
- Filter body: Mirror polishing,electrolytic polishing
- Micron: 0.5μm--100μm
- Filter body material: SS304
Applications
- Pharmaceuticals
- Petroleum Derivatives
- Water Treatment
- Coolants
- Paints & Inks
- Food & beverages
- Bore Well water
- Dairy
- Dyes & Intermediates
- RO Pre filtration
- Processing Chemicals
- & Many More
Customer reviews
No reviews were found for Lifeierte - Cartridge Filter Housing. Be the first to review!