Model BPC-602 - Cylinder Driven Lift
3 Models Available, Meets ANSI Z245 Type B Specifications, Powered By a 3” Bore Hydraulic Cylinder With Cushions On, Both Ends, EZ Bolt On Kit Standard, Heavy Duty Cast Iron Bushings For Long Life Cycle, Kick out Feature Protects Lifter From Ground Damage, Modular Bolted Construction For Ease Of Part Replacement.
-
Most popular related searches
Lift Unit Specifications
1 MOUNTING BRACKET:
Unit will be bolted to mount ing bracket for ease of repair or replacement.
2 HYDRAULIC CYLINDER:
Non adjustable cushions on both ends.
3 CART LIFTING CAPABILITY:
ANSI Type B (American 2 bar cart)
4 Major Pivot Points:
All major pivot point s are 1 ¼” diamet er and equipped with cast iron bushings and 'Zerk' type grease f ittings.
5 IMPACT RELEASE DEVICE:
The 602 has a mechanical kickout f eature that allows the unit to release f rom the vertical (down) posit ion when struck by the st reet surface while the t ruck is in forward motion. When fully act ivated the vert ical ground clearance is improved by four (4) inches. Unit must reset automat ically to lift posit ion.
6 LIFT BAR POCKET:
The lift bar pocket ( saddle) is designed to minimize cart free movement when unit is in the up position. Bolted on for ease of replacement if damaged.
7 MOUNTING HEIGHT:
With the t ruck in 'Level' position, the measurement from the bottom of the lift bar pocket to ground level will be no less than 33' and no more than 35'. The top of the mounting bracket will be at 37” to 39”.
8 DUMP ANGLE:
The lift plate when fully raised, will be at no less than 135 degrees inclusive.
9 LIFT PLATE (LIFTING FRAME):
Construct ed of 3/16' thick st eel plate. Bolted on for ease of replacement if damaged. The lift plate will be paint ed saf ety yellow.
10 HOOK (LOWER BAR LATCH):
Mechanically operated to securely hold the cart in place even if it is shaken at the top. Rotating style with replaceable bronze bushings mount ed on 3/4' diameter steel shaft. No sliding surfaces to wear out. Mounting bracket is bolt ed to the lift plate for ease of replacement if damaged.
11 CART LIFTING CAPACITY:
The 602 will lif t a minimum of 350 pounds at 1800 PSI hydraulic pressure.
Customer reviews
No reviews were found for Model BPC-602 - Cylinder Driven Lift. Be the first to review!