Model DSE7420 - Auto Mains (Utility) Failure Control Modules
From Auto Mains (Utility) Failure Control Modules
The DSE7420is a sophisticated mono display auto mains (utility) control module packed with industry leading features to enhance single-set control. The module can be used across a wide range of diesel and gas gen-set applications.
-
Most popular related searches
OVERALL SIZE
OVERALL SIZE
240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”)
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7' x 6.3')
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.88kg
PRODUCT VARIANTS
7420-01 - 7420 Auto Mains (Utility) Failure Control Module
Key Features
CAN and magnetic pick-up sensing
Configurable inputs/outputs (11/8).
Fuel usage monitor and low level alarms
Remote communications (RS232, RS485, Ethernet, Modbus, RTU/TCP).
Configurable event log (250).
Integral PLC editor
Power monitoring (kWh, kVAr, kvAh, kVArh), reverse power protection, kW overload protection.
Load switching, load shedding & dummy load outputs
Data logging (HDD/USB).
DSE Configuration Suite PC Software
Tier 4 CAN engine support.
Benefits
Makes the module ideal for standard and electronic engine applications
Provides multiple installation options
Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected.
Provides secure and simple off site monitoring. All ports are continuously active.
Provides access to historical alarms and operational status
Ensures additional applications are easily integrated into the system
Provides clear accurate power measurement information
Allows load options and dummy load requirements to be independently controlled.
Provides current and historical status information
Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
Ensures the control module can be used with the latest in modern electronic engine technology.
Specification
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
260 mA at 12 V, 130 mA at 24 V
MAXIMUM STANDBY CURRENT
120 mA at 12 V, 65 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G,H,I & J
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAINS (UTILITY)
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
Environmental Testing Standards
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.
Customer reviews
No reviews were found for Model DSE7420 - Auto Mains (Utility) Failure Control Modules. Be the first to review!