Model DT2410 - 10A PWM Solar Controller
From Solar Controller for Power Generation System
The series controllers are new generation of general intelligent controllers which are researched for solar control field by our company, user can choose step-up, step-down, and other types of drive equipment freely according to actual needs. The series controllers are based on series type pulse width modulation (PWM) charging mode, with LCD display and USB port output function, can be widely used in household power supply system, solar street light and all kinds of small solar power generation application system.
Product Features
- Automatic identify system voltage;
- Sealed / Gel / Flooded, three types of battery charging programs can be selected;
- 3-Stage PWM charging mode: bulk charge / boost charge / equalize charge / float charge; application of an equalize charging to the battery periodically, can effectively prevent the battery from non-equalization and sulfuration, increase the battery lifetime (except Gel);
- Battery temperature compensation function, intelligent adjustment of charging parameters;
- Friendly HMI interface: double buttons setting, LCD can display running states and working parameters of the controller dynamically;
- A wide range of load modes: light control, light control & timer, debug and manual mode, expand application scenarios;
- Electronic protection: over charge, over discharge, overheat, overload and short circuit.
- USB port design, make convenience for users to charge the relevant electronic equipment.
- Real-time power statistics recording function.
Specifications:
- System voltage : 12V/24V auto identification
- Max. charging / discharging current : 10A
- No-load loss : <25mA
- Max. solar panel voltage : 50V
- Max. solar panel : 12V/150W 24V/300W
- Battery type : Sealed : Flooded : Gel
- Equalize charging voltage* : 14.6V : 14.8V : None
- Boost charging voltage* : 14.4V : 14.6V : 14.2V
- Float charging voltage* : 13.8V
- Low voltage disconnect voltage* : 11.0V
- Low voltage reconnect voltage* : 12.5V
- Charging limits voltage* : 15.2V
- Overvoltage protection* : 16.0V
- Light control voltage* : turning on lights 5V, turning off lights 6V
- Boost charging time : 120mins
- Equalize charging time : 60mins
- Equalize charging interval : 30days
- Temperature compensation : -3mV/°C/2V
- LCD display temperature : -20°C~70°C
- Working temperature / Protection level : -25°C~50°C/IP30
- USB output : 5VDC/1.5A
- Weight : 0.4Kg
- Dimensions : 162*'
Customer reviews
No reviews were found for Model DT2410 - 10A PWM Solar Controller. Be the first to review!