Model E Series - Economical Biogas Contaminant Removal System
From Landfill Gas Dryers / Digester Gas Dryers / Biogas Dryers
Gas is filtered by an inlet scrubber before the gas to refrigerant (or glycol) heat exchanger to remove entrained particulates & liquids; and, to keep heat exchangers clean. The gas to refrigerant heat exchanger cools gas to 40oF before its compressed, which protects blower/compressor.
-
Most popular related searches
Gas compression raises the gas temperature, and lo...
Gas compression raises the gas temperature, and lowers its relative humidity; which is desirable for most applications. Upon compression, the gas flows thru Moisture Evaporator (optional); where the gas is cooled and the moisture is evaporated. The system includes a 'Back Pressure Control Valve' to control gas flow & pressure to the system outlet and return the excess gas. It's available as a factory integrated system; or, in two parts – Gas to Refrigerant Heat Exchanger and balance of the system.
Specifications
Design Conditions
Gas Outlet Dew Point: 4oC / 40oF
Inlet temp: 120oF / 49oC (maximum)
Amb temp: 110oF / 43.3oC (maximum)
Gas flow thru SS (except blower)
Alarms:
- High DP across filter(s)
- High Liquid Level – Separators
- High Liquid Level – Filters
- High Refrigerant Pressure
- Low Refrigerant Pressure
- Low Inlet Gas Pressure
- Low Outet Gas Pressure
Instruments / Controls
- Class 1, Group D & Division 1/2
- Control Panel: NEMA 4X
- Single Point Power Feed
- Electro Mechanical / PLC Controls
- Motor controls
- Fusible Disconnect/ Circuit Breaker
- Refrig. Suction Pressure Reading
- Refrig. Disch. Pressure Reading
- Dew Point Temperature Reading
- Gas Inlet Temperature Reading
- Gas Outlet Temperature Reading
- Gas Inlet Pressure Reading
- Gas Outlet Pressure Reading
- Filter (s) Pressure Drop Reading
Customer reviews
No reviews were found for Model E Series - Economical Biogas Contaminant Removal System. Be the first to review!