Model GC - Refrigerant Gas Dryer
From Biogas Treatment / Biogas Conditioning
-
Most popular related searches
The condensation of water vapor in the gas takes p...
The condensation of water vapor in the gas takes place by lowering the temperature and ran thus leads to a dehumidification. The condensate is and in one case the cooling downstream Deposited over discharged a siphon. By the dehumidification efficiency increase enlarge is Achieved at the same time.
The EnvironTec Gastrocknugsprozess Provides a cost-effective solution for it.
The drying gas can be Supplied to the modules power ranges from 100 to 6000 Nm³ / h of gas throughput. On request, special designs are available.
Additional applications are arrangements in combination with a booster heater before activated carbon filters and fed into a gas pipeline to avoid condensation.
To save energy, the gas dryer is equipped with a plug-in from air cooler and tube exchanger expandable.
- Gas cooling for dry of biogas, sewage and landfill gas
- Compact, split and special design-available guides (for Exampwe container)
- Condensate trap or about pressure pump with independent
- Increasing the efficiency and protection for gas engines and CHP
- Easy to use
- Gas in contact with stainless steel 1.4404 / 1.4571
- Optional with reheating
- Optional with precooling for energy saving
Application/Industries Served
- Municipal and industrial wastewater treatment plants
- Chemical Industry
- Paierindustrie
- Landfills
- Food industry
- Agriculture
Design Parameters
- Gas flow rate: 100 – 6.000m³/h
- Gas temperature at inlet: max. 105°C
- Gas temperature at outlet: 3 - 5°C min
- Gas pressure at inlet: -100 to + 500 mbar
- Ambient Temperature: -20 to + 45°C
Customer reviews
No reviews were found for Model GC - Refrigerant Gas Dryer. Be the first to review!