Meca Solar - Model MS-2 - 10+ - 2 Axis Solar Trackers
From Meca Solar - 2 Axis Solar Trackers
V-shaped metal structure and grill for up to 13.16 kWp (Fifty-six 235 Wp modules) panels. PLC tracking, in a fully equipped independent electric panel. Three phase motors on both axes. Hook-up/connection cabinet for storing protectors (magnetothermic (PIA), differential, power surge protection), fully wired. Two 6.0 kWn single phase SMA Sunny Boy SB 6000 inverters for outdoors use, IP 65.
Technical Specifications
- Tracker axis DUAL AXIS: Horizontal and Vertical
- Maximum surface of modules 90 m2
- Maximum Photovoltaic Power 13.16 kWp (depending on the efficiency of the modules)
- Azimuth drive By gearmotor and cogged crown wheel
- Azimuth rotation angles Vertical axis: -120 ° to +120 °
- Tilt drive Electrically driven mechanical jack
- Motorized Tilt Adjustable from 0 ° to 60 °
- Tracker height at 60 ° 6700 mm (from ground to top modules)
- Motor consumption 100 kWh / year
- Motor operating voltage 380 V Three Phase
- Structure Hot dipped galvanized steel structure
- Structure design 'V' Structure on cogged crown wheel
- Weight without modules, and without foundation 3.000 kg
- Electrical cabinets and PLC Metal, weatherproof, fully wired, IP66
- Includes PLC fully wired to motor with protection
- Electrical supply cabinet Metal, weather-tight, fully wired, IP66, includes AC surge protection and magnetothermic (PIA) differential (only for MS TRACKER +)
- Tracking technology Independent Astronomical programming of PLC
- Monitoring On-site, Ethernet, Internet (OPTIONAL)
- Inverters 2 SB SMA inverters 6.0 KW rating, IP65
- 1 SC 500 HE for 50 trackers
- Modules to be installed Any type of PV modules.
- Optional module holder profile
- Module maximum weight 1250 Kg
- Wind protection system Programmable.
- Horizontal positioning at speeds over 70 km / h (by gearmotor slipping)
- Foundation Surface circular foundation, 10 cubic yards (7.5 m3 )wire mesh concrete. Optional anchor bolts, direct bolt anchoring
Advantages
MULTI-POWER and MULTIPLE MANUFACTURER FLEXIBILITY
The design of the omega panel support structure provides the MECASOLAR tracker with incredible FLEXIBILITY when it comes to installing different panels made by various manufacturers.The system can handle a maximum power of 13.16 kWp.
OVER 35% INCREASE IN PRODUCTIVITY
The MECASOLAR tracking system is capable of increasing photovoltaic solar energy production by more than 35%, when compared to a fixed installation. This maximizes profits by reducing the investment in solar panels.
FOUNDATION
Foundation on surface footing - 10 cubic yards (7.5 m3) - that does not require any excavation. It is only necessary to clean off the terrain, removing the top layer of vegetation and levelling the ground.
OUTPUT / THREE PHASE CONNECTION
Each of the three phases is connected to each one of the 3 inverters. This feature reduces losses due to wiring and provides a more balanced power output. Upon any damage in any of the 3 phases, 2/3 of the installation is still productive.
Customer reviews
No reviews were found for Meca Solar - Model MS-2 - 10+ - 2 Axis Solar Trackers. Be the first to review!