PG LifeLink - Model XTL - Isolated Power Panel
From Standard Isolated Power Panel
The Standard XTL Isolated Power Panel is designed to deliver power to remote Laser Outlet Modules placed in multiple procedure rooms from a single, centrally located panel. This panel is frequently installed in a hospital operating room or other procedure room designated for laser procedures.
-
Most popular related searches
Product Overview
Standard configuration includes a Programmable Logic Controller (PLC) system. This protects against unexpected overload and allows power to be selectively added to the location needed. The outlet is energized by opening the receptacle cover, activating the contact switch, and signaling the panel PLC to power the circuit. Once energized, the circuit is locked on until the device is disconnected and the cover is closed. The lockout feature can also limit the number of energized outlets, allowing the hospital to control the number of laser procedures performed at any one time.
Up to 12 outlets can be connected to the XTL Panel. The number of energized outlets operated simultaneously is determined by the transformer capacity and the distance of outlet locations from the panel. The PLC protects against overloading the panel transformer. For more information, see design recommendations here.
Features
All XTL Isolated Power Supply Systems include:
Hospital Grade Isolation Transformer:
- Supplies up to 12 each (208 or 240V, 30 or 50A) circuits for cord-connected, portable laser and x-ray device loads
- Standard sizes for each section range from 15 to 25kVA for portable laser devices
- Primary voltages: 480, 380, 277, 240, 230, 220, 208, 1-phase, 60 Hz
- Secondary voltages: 240, 220, 208, 1-phase
- Low leakage, electrostatically shielded primary and secondary windings
- 220°C Class R Insulation
- Clamped and bolted design with anti-vibration mounting bushings for quiet operation
- Designed and built in accordance with UL and CSA Standards
- 50Hz available (optional)
Mark V Line Isolation Monitor (LIM):
- Continuous hazard current monitoring
- Digital processing with self-test/self-calibration feature
- Large, multi-line LCD simultaneously displays all critical system parameters
- Multiple remote annunciator options available
- Optional transformer temperature and load monitoring
- Optional LIM-Connect™ Software
Interior Chassis:
- Engineered to order, completely factory assembled, and 100% tested
- Primary main circuit breaker
- Up to 12 factory installed 120V, two-pole, bolt-on branch circuit breakers
- Copper ground bus
- Terminal strip for connecting Remote Annunciator(s)
- Customer may specify standard circuit breakers from Eaton, GE, Siemens or Schneider Electric for consistent coordination or to maintain facility standard
Enclosure and Trim:
- Heavy-duty galvanized steel back box designed for flush mounting; can be shipped ahead of interior during rough-in
- Stainless steel front trim panel with fully hinged, door-in-door construction reduces damage and potential injuries during installation, testing, and maintenance
- Surface mounting options available
- LIM is viewable through the front trim
Available Accessory Outlet:
- At least one Laser or X-ray Outlet Module is required for each branch circuit supplied by an XTL panel.
- Laser and X-ray Outlet Modules (RLO-R and RXO-R) include a user specified NEMA receptacle, LIM Remote Annunciator, galvanized back box and a stainless steel front trim with hinged door over the laser or X-ray receptacle
- Standard configuration includes a Programmable Logic Controller (PLC) system.
- Optional non-controlled version available
- Optional “In-Use” light controls available
Panel Sizing
kVA Size/Back Box Size
- 15: 70'H x 30'W x 12'D
- 25: 70'H x 30'W x 14'D
Customer reviews
No reviews were found for PG LifeLink - Model XTL - Isolated Power Panel. Be the first to review!