Energy Industry Equipment Near Croatia
-
Manufactured by Centrometal d.o.o.based in CROATIA
Hot water stoves CentroPelet ZV are wood pellet firing stoves intended for heating the room with air by means of a built-in fan and water through the radiator central heating. They are made of steel with modern design and high efficiency. They have a built-in circulation pump, safety valve, pressure switch, expansion vessel and automatic vent valve. They are standardly supplied with a remote ...
-
Manufactured by Froniusbased in AUSTRIA
The transformerless Fronius Symo 10.0 kW is the ideal compact three-phase solar inverter for commercial applications wth a 208/240 grid connection. The SnapINverter has a slew of features fully integrated, Fronius SuperFlex Design with dual MPPT, and an installation process like no other. The hinge mounting system and lightweight inverter creates a streamlined installation that can be done under ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX400 combines very high efficiency (nominal 35%) with excellent emissions performance to a compact industrial design. This makes it the ideal choice for a wide variety of power generation applications. For industrial cogeneration, the high steam-raising capability of more than 27 tonnes per hour contributes towards achieving overall plant efficiencies of 80% or higher. Incorporating proven ...
-
Manufactured by Koncar-Generators and Motors Inc.based in CROATIA
This catalogue contains description and basic technical data of totally enclosed rib cooled three-phase squirrelcage induction motors. Series 9AZJ 355-560 consists of five frame sizes: 355, 400, 450, 500 and 560. highvoltage induction motors excel in up-to-date design, high degree of efficiency, insulation class F in VPI technology, adaptability to various requirements of drives, low maintenance ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by Koncar-Generators and Motors Inc.based in CROATIA
This catalogue contains description and basic technical data of totally enclosed three-phase high-voltage squirrel-cage induction motors Series 6AJV6 355-800. Series consists of eight frame sizes: 355, 400, 450, 500, 560, 630, 710 and 800 mm. KONČAR high-voltage induction motors of Series 6AJV6 355-800 excel in up-to-date design, high degree of efficiency, insulation class F in VPI ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for ...
-
Manufactured by Froniusbased in AUSTRIA
The Fronius IG Plus Advanced is the first complete inverter lineup of the NEC 2011 compliant AFCI protected inverters in the United States. Power classes ranging from 3 to 12 kW in both single and true 3 phase applications with integrated Fronius MIX Technology and wide voltage windows are the perfect match for your system ...
-
Manufactured by Froniusbased in AUSTRIA
The microplasma weld process is suitable for sheet thicknesses of above 0.1 mm (0.004"). Every TransTig 800 can be retrofitted with the PlasmaModule 10 and a PTW 500 plasma welding torch. The system configuration delivers a microplasma solution to fulfill the most stringent quality specifications on welding tasks in the 0.5 A to 80 A range. Both manual and mechanized utilization is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized throughout the entire range of flow, yielding ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the vapors is not a viable ...
-
Manufactured by Centrometal d.o.o.based in CROATIA
Wood pellet stoves CentroPelet ZS are hot air wood pellet stoves that heat the room(s) with hot air using a built-in fan. They are made out of steel and provide high efficiency heating. Due to their modern design they do not take much space in the room. They are delivered with remote control and digital control that can be used to manage the operation of the stove and select the weekly programme. ...
-
Manufactured by Froniusbased in AUSTRIA
In the past there have been a number of drawbacks associated with plasma cutting. Not least, conventional cutting processes suffer from limited mobility due to the fact that they require a supply of compressed air. The large proportion of nitrogen in the plasma jet, moreover, encouraged chemical reactions at the heated cutting surfaces and the workpiece surfaces, which could lead to the formation ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally dispose of heavier waste gases which have a greater ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX501-KB7 package builds on the reliable KB5 with the addition of a zero stage to the compressor inlet of the Siemens turbine. This increases mass flow and pressure ratio, thus increasing performance and efficiency and boosting power output to over ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...
-
Manufactured by Centrometal d.o.o.based in CROATIA
Hot water stoves Centropelet ZVRGL17, ZVRGL20, ZVRGL24 are wood pellet firing stoves with round glass intended for heating the room with air by means of a built-in fan and water through the radiator central heating. They are made of steel with modern design and high efficiency. They have a built-in circulation pump, safety valve, pressure switch, expansion vessel and automatic vent valve. They ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you