Energy Industry Equipment Near New Zealand
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...
-
Manufactured by Grundfosbased in DENMARK
UPS is a three-speed circulator pump designed for heating and air-conditioning systems and is also used for central and district heating systems. The pump provides reliable and maintenance-free ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
-
Manufactured by Powerhouse Wind Ltdbased in NEW ZEALAND
Innovative single blade and teetering hub design offers quiet, efficient and affordable home ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Trends in anaerobic digestion aim to reduce retention time and increase dry solids concentrations, raising organic loading and improve efficiency. With increased organic loading of digesters, mixing becomes critical to ensure the whole digester volume is available for processing; fresh feed material is mixed uniformly within the reactor; and the biological breakdown products of digestion are ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...
-
Manufactured by Grundfosbased in DENMARK
The Grundfos MAGNA1 circulator pump is ideal for basic performance needs in heating and cooling applications. The pump offers basic system control and monitoring and can communicate via a fault relay and digital ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
-
Manufactured by Grundfosbased in DENMARK
The Grundfos MIXIT valve unit is designed for heating and cooling systems. MIXIT features temperature control, application specific settings, eco functions, such as balancing limiters and pressure independence, as well as access to the Grundfos BuildingConnect Free Monitoring ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
I8-20S incinerator is one of the smallest and easily maintained general incinerators we make. The i8-20S General Incinerator is a simple and effective small incinerator with suitability for various non-hazardous waste types such as wood, paper, cardboard and other uncontaminated materials. The addition of a secondary chamber allows this model to operate without smoke, odours or harmful ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-M120 differs from other incinerator models in the medical range with its use of cylindrical secndary chamber and oversized loading door. The i8-M120 is a medium-capacity model from our range of specialist "M" incinerators that are optimized for medical waste disposal. This unit benefits from a secondary chamber with an afterburner for the re-burn of harmful emissions with a 2 second ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you