Nitrogen Generator
The electrolysis separation pool is made of stainless steel,in which the liquid storage, nitrogen generated and deoxygenating can be proceeded at the same time, and the electrolyte is circulated unblocked. Because of the big electrolysis area and the low temperature of the electrolysis pool, the output nitrogen is of big amount and high purity. Equipped with the device that prevent the returning of the liquid, the instrument is guaranteed no liquid returning phenomenon during operation. Equipped with over-voltage proof and over-current proof device, the instrument is safe and reliable. The instrument can be used continuously or disconnectedly with long service life, stable performance such as flow and purity. The flow is visualized and convenient for user to check because it is tracked automatically and displayed in digital. The experiment work becomes more convenient because of the small volume, light weight, reasonable structure and easy operation of the instruments.
Operating Method and On-Line
- First, please check whether there is unusual phenomenon such as the serious damage on the surface or inside of the instruments caused from transportation. And then check whether the fittings are complete according to the manual.
- Compounding the electrolyte: Dilute 130g KOH with distilled water of 450ml. After cooling, fill the solution into the liquid container of 2 liters in the upper of the instrument. Then fill distilled water into the container until the liquid surface reaches to the level of 1.8 L.
- Screw the sealing cap off on the output exit on the back board of the instrument, then connect the pipeline of the external diameter of 3mm with the air origin (the pressure of air origin must be ≥0.4MPa) and assure it sealed.
- Tighten the sealed cap to make it not leak, then turn on the instrument. If the display of pressure is 0. 5MPa, and the digital LED display of flow is “000” or close to “000” after started the machine for a few minutes, it shows the instrument is normal; Otherwise it shows the instrument leaks. In the case of leakage, check the instrument with suds and exclude from leaking trouble.
- If the instrument is normal, turn off the power, and take down the sealed cap of output exit. Connect the pipeline of the external diameter of 3mm with the instrument, and assure there isn’t any leakage, then hydrogen can be supplied normally.
- After operating, you need to switch off the power in time. While using it again, you just need to switch it on.
Customer reviews
No reviews were found for Nitrogen Generator. Be the first to review!