Nordex - Model N131/3000 (3.0 megawatts) - Wind Turbine
The N131/3000 is specially designed for light-wind locations (IEC-3). With its 3.0 MW installed capacity the increase in rated output amounts to 25 percent. Despite the substantial increase in output, sound power level is limited to max. 104.5 dB(A).
-
Most popular related searches
Nordex offers a much larger rotor for each wind cl...
Nordex offers a much larger rotor for each wind class. This produces higher yields. With 131 metres the rotor diameter of the N131/3000 is 14 metres larger resulting in a 25.8 percent increase in swept area. The turbine is a very efficient high-yielding turbine for light-wind locations (IEC-3).
The N131/3000 is based on Nordex’ proven turbine design of Generation Delta. With the N131/3000, Nordex customers are able to benefit from our more than 13 years of experience in the multi-megawatt segment
Brief description
Greater nominal output
With a nominal output of 3.0 MW, the N131/3000 has a 25 percent greater capacity than its predecessor. It is our most efficient light wind turbine.
Proven rotor blade design - increased rotor surface
The N131/3000 features the in-house developed own NR65.5 rotor blade. The rotor diameter is 14 metres larger. With its 13,478 square meters it has a 25 percent greater rotor sweep.
Optimized hub heights
With a hub height of 99 meters for wind class 3 the turbine is perfectly suitable for sites with construction height limits. The tubular steel tower with a hub height of 114 metres will help to achieve greater yields.
Reduced power levels
Despite the substantial increase in output, sound power level is limited to max. 104.5 dB(A). What is more, Nordex offers numerous noise-optimised operating systems for particularly noise-critical locations. Thank to the improved sector-cut-out modes, an optimum yield is still achieved.
Proven drive train concept
The drive train concept is based on the proven 3-point bearing structure. The optimised drive train geometry reduces the forces impacting the individual components, thus lowering the strain on the robust rotor bearings.
Economical electrical system
As with the first wind power systems using Nordex’s multi-megawatt platform, the N131/3000 is fitted with a double-fed asynchronous generator and frequency converter. This system is characterised by superior reliability and economic efficiency.
Internally produced control system
Over 2,600 Nordex turbines have already been fitted with Nordex’s own proven Nordex Control™ system, which controls, regulates and monitors the wind power systems. Permanent and protected access to the turbine and wind farm data on site or remotely is browser-based, interactive and secure. With its modular structure and standardised interfaces, Nordex Control™ can be adjusted flexibly to meet the customer’s SCADA requirements.
Accustomed grid compatibility
The N131/3000 meets the grid requirements of the international markets. The German System Service Ordinance (SDLWindV) is one of the most demanding grid codes in Europe. With their fault ride-through capabilities, the turbines can effortlessly bridge any disruptions in voltage and thus fully comply with all requirements for the system service bonus. What is more, the Nordex Windfarm Management System allows the grid operator to directly control the active and reactive power of the windfarm in the grid.
Extended standard operating conditions
The turbine can be operated at sites with average temperatures in a normal climate range and even at temperatures of as low as -20 degrees Celsius, thus enhancing the annual yield at your site. The proven Nordex Cold Climate Package additionally helps to open up high-yield cold locations. The cold-climate version of the turbine has an extended operating range of temperatures down to -30 degrees Celsius.
Anti-Icing System
The Anti-Icing System heats the aerodynamically most important surfaces of the rotor blades, thus reducing ice formation efficiently, resulting in considerable yield gains at sites characterised by frequent ice formation.
A safe and spacious work place
The turbine nacelle provides particularly safe and roomy space to work with extended escape and rescue routes. This helps to lower maintenance-induced downtimes:
Readily accessible systems for maintenance
On-board crane for replacing components <=1 ton
Swift and weather-protected access to the hub thanks to complete encapsulation
Customer reviews
No reviews were found for Nordex - Model N131/3000 (3.0 megawatts) - Wind Turbine. Be the first to review!